Los datos mostrados de la Universidad Carlos III de Madrid son parciales, pues con ellos se pretende responder a 2 preguntas:
- ¿Quién investiga un tema concreto?
- ¿Qué investiga un/a investigador/a, grupo o departamento específico?
Por esta razón sólo recoge investigadores/as en activo.
Además, sólo se recogen los resultados de investigación siguiendo estos límites:
- Proyectos de investigación desde 2006.
- Publicaciones, Tesis doctorales, Patentes y Software desde 2008.
Arias Hernandez, Angel aariash@ing.uc3m.es
Actividades
- Artículos 39
- Libros 0
- Capítulos de libro 3
- Congresos 26
- Documentos de trabajo 0
- Informes técnicos 0
- Proyectos de investigación 50
- Tesis dirigidas 5
- Patentes o licencias de software 0
Thermo-electro-mechanical microstructural interdependences in conductive thermoplastics
- Crespo Miguel, Javier
- Lucarini San José, Sergio
- Arias Hernandez, Angel
- Garcia Gonzalez, Daniel
npj Computational Materials (p. 1-11) - 7/2023
https://doi.org/10.1038/s41524-023-01091-8 Ver en origen
- EISSN 2057-3960
Thermo-electro-mechanical aging and degradation of conductive 3D printed PLA/CB composite
- Crespo Miguel, J.
- Garcia Gonzalez, Daniel
- Robles Muñoz, Guillermo
- Hossain, M.
- Martinez Tarifa, Juan Manuel
- Arias Hernandez, Angel
Composite structures (p. 1-18) - 7/2023
https://doi.org/10.1016/j.compstruct.2023.116992 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Magneto-mechanical system to reproduce and quantify complex strain patterns in biological materials
- Moreno Mateos, Miguel Angel
- Gonzalez Rico, Jorge
- Nunez Sardinha, Emanuel
- Gomez Cruz, Clara
- Lopez Donaire, Maria Luisa
- Lucarini San José, Sergio
- Arias Hernandez, Angel
- Muñoz Barrutia, Maria Arrate
- Velasco Bayon, Diego
- Garcia Gonzalez, Daniel
Applied Materials Today (p. 1-15) - 6/2022
https://doi.org/10.1016/j.apmt.2022.101437 Ver en origen
- ISSN 2352-9407
Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
- Tirado Garcia, Ignacio
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Rusinek, Alexis
- Robles Muñoz, Guillermo
- Martinez Tarifa, Juan Manuel
- Arias Hernandez, Angel
COMPOSITE STRUCTURES (p. 1-9) - 6/2021
https://doi.org/10.1016/j.compstruct.2021.113744 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Influence of elastomeric matrix and particle volume fraction on the mechanical response of magneto-active polymers
- Garcia Gonzalez, Daniel
- Moreno Pelayo, Miguel Angel
- Valencia Blanco, Leticia
- Arias Hernandez, Angel
- Velasco Bayon, Diego
COMPOSITES PART B-ENGINEERING (p. 1-11) - 6/2021
https://doi.org/10.1016/j.compositesb.2021.108796 Ver en origen
- EISSN 1879-1069
- ISSN 1359-8368
New experimental insights into magneto-mechanical rate dependences of magnetorheological elastomers
- Gonzalez-rico Iriarte, Jorge
- Lopez Donaire, Maria Luisa
- Garcia Gonzalez, Daniel
- Moreno Mateos, Miguel Angel
- Arias Hernandez, Angel
COMPOSITES PART B-ENGINEERING (p. 1-21) - 11/2021
https://doi.org/10.1016/j.compositesb.2021.109148 Ver en origen
- EISSN 1879-1069
- ISSN 1359-8368
Low temperature mechanical behaviour of PVDF: cryogenic pre-treatment, quasi-static, cyclic and dynamic experimental testing and modelling
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Rusinek, Alexis
- Bernier, Richard
- Arias Hernandez, Angel
MECHANICS OF MATERIALS (p. 1-13) - 8/2020
https://doi.org/10.1016/j.mechmat.2020.103436 Ver en origen
- EISSN 1872-7743
- ISSN 0167-6636
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties
- Garzon Hernandez, Sara
- Garcia Gonzalez, Daniel
- Jerusalem, A.
- Arias Hernandez, Angel
Materials and Design (p. 1-10) - 3/2020
A continuum constitutive model for FDM 3D printed thermoplastics
- Garzon Hernandez, Sara
- Arias Hernandez, Angel
- Garcia Gonzalez, Daniel
COMPOSITES PART B-ENGINEERING (p. 108373(1)-108373(13)) - 11/2020
https://doi.org/10.1016/j.compositesb.2020.108373 Ver en origen
- EISSN 1879-1069
- ISSN 1359-8368
Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK
- D Barba
- A Arias
- D Garcia-Gonzalez
International Journal Of Solids And Structures (p. 205-217) - 1/1/2020
10.1016/j.ijsolstr.2019.08.021 Ver en origen
- EISSN 1879-2146
- ISSN 00207683
Este/a investigador/a no tiene libros.
Failure Behavior of Aluminum Alloys Under Different Stress States. In: Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures
- Rodriguez Millan, Marcos
- Garcia Gonzalez, Daniel
- Arias Hernandez, Angel
Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures (p. 1-25) - 12/2020
Editor: SPRINGER
https://doi.org/10.1007/978-1-4614-8968-9_68-1 Ver en origen
- ISBN 978-1-4614-8968-9
Thermo-mechanics of Polymers at Extreme and Failure Conditions: Influence of Strain Rate and Temperature. In: Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Barba, Daniel
- Arias Hernandez, Angel
Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures (p. 1-28) - 10/2020
Editor: SPRINGER
https://doi.org/10.1007/978-1-4614-8968-9_67-1 Ver en origen
- ISBN 978-1-4614-8968-9
Analysis of high-speed impact problems in the aircraft industry. In: Constitutive Relations under Impact Loadings: Experiments, Theoretical and Numerical Aspects
- Arias Hernandez, Angel
- Lopez Puente, Jorge
- Loya Lorenzo, Jose Antonio
- Varas Doval, David
- Zaera Polo, Ramon Eulalio
Constitutive Relations under Impact Loadings: Experiments, Theoretical and Numerical Aspects (p. 137-207) - 6/2014
Editor: SPRINGER
https://doi.org/10.1007/978-3-7091-1768-2 Ver en origen
- ISBN 978-3-7091-1767-5
Dinamización de clases magistrales y de problemas mediante Wooclap y Cuestionarios Autoevaluables
- Arias Hernandez, Angel
Jornada de Innovación Docente 2022 - 2022
Experimental and numerical study of a new structural composite for innovative cars
- Sanchez Martinez, Carlos
- Garcia-pozuelo Ramos, Daniel
- Olmeda Santamaria, Ester
- Gomez Amador, Ana Maria
- Diaz Lopez, Vicente
- Navarro Ugena, Carlos
- Arias Hernandez, Angel
International conference on Mechanics of Composites MECHCOMP2018 - 2018
A viscous-hyperelastic constitutive model for transverse isotropic soft tissues
- Garcia Gonzalez, Daniel
- Jerusalem, Antoine
- Garzon Hernandez, Sara
- Zaera Polo, Ramon Eulalio
- Arias Hernandez, Angel
BAMC 2018: The 60th British Applied Mathematics Colloquium (p. 60) - 2018
Mechanical behaviour of 3D printed polymeric matrix under dynamic loading
- Garzon Hernandez, Sara
- Rusinek, Alexis
- Matadi, R.
- Garcia Gonzalez, Daniel
- Arias Hernandez, Angel
MECHCOMP3: 3rd International Conference on Mechanics of Composites - 2017
Editor: Societá Editrice Esculapio
- ISBN 9788893850292
A constitutive framework for anisotropic 3D printed polymeric composites
- Garzon Hernandez, Sara
- Garcia Gonzalez, Daniel
- Rusinek, Alexis
- Matadi-boumbimba, Rodrigue
- Arias Hernandez, Angel
ICCS20: 20th International Conference on Composite Structures - 2017
Editor: Societá Editrice Esculapio
- ISBN 9788893850414
High<br/>velocity impact response of 3D printed thermoplastic composites
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Arias Hernandez, Angel
MECHCOMP3: 3rd International Conference on Mechanics of Composites - 2017
Editor: Societá Editrice Esculapio
- ISBN 9788893850292
Finite element modeling of UHMWPE personal protections considering strain-rate dependence
- Aranda Ruiz, Josue
- Braun, Matias Nicolas
- Rodriguez Millan, Marcos
- Loya Lorenzo, Jose Antonio
ICCS19: 19th International Conference on Composite Structures (p. 45-45) - 2016
Editor: Societá Editrice Esculapio
https://doi.org/10.15651/978-88-748-8977-8 Ver en origen
- ISBN 9788874889778
Single and multiple impact behaviour of thermoplastic composites
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Rodriguez Millan, Marcos
- Arias Hernandez, Angel
MECHCOMP2: 2nd International Conference on Mechanics of Composites - 2016
Editor: Societá Editrice Esculapio
https://doi.org/10.15651/978-88-748-8963-1 Ver en origen
- ISBN 9788874889631
A one dimensional model to uncover the key mechanisms which control flow localization in the dynamic tensile test
- Vaz-romero Santero, Alvaro
- Rodriguez Martinez, Jose Antonio
- Arias Hernandez, Angel
ESMC 2015: 9th European Solid Mechanics Conference - 2015
Este/a investigador/a no tiene documentos de trabajo.
Este/a investigador/a no tiene informes técnicos.
PID2021-123294OB-I00 - Metamateriales impresos para el aislamiento de banda ancha de vibraciones mecánicas
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
Ejecución: 01-09-2022 - 31-08-2025
Tipo: Nacional
Financiado por: AGENCIA ESTATAL DE INVESTIGACION (AEI)
TED2021-129709B-I00 - Comportamiento mecánico de polímeros termoplásticos reciclados en sucesivos procesos de impresión 3D
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Aranda Ruiz, Josue
- Garcia Gonzalez, Daniel
Ejecución: 01-12-2022 - 30-11-2024
Tipo: Nacional
Financiado por: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Comportamiento balístico de probetas de aluminio creadas por impresión 3D
- Loya Lorenzo, Jose Antonio
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Aranda Ruiz, Josue
Ejecución: 27-04-2022 - 27-05-2022
Tipo: Nacional
Financiado por: IDONIAL
Comportamiento balístico de probetas metálicas por impresión 3D
- Loya Lorenzo, Jose Antonio
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Aranda Ruiz, Josue
Ejecución: 01-12-2021 - 31-12-2021
Tipo: Nacional
Financiado por: IDONIAL
886519 - BEDYN: Development of a methodology (test, measurement, analysis) to characterize the BEhaviour of composite structures under DYNamic loading
- Artero Guerrero, Jose Alfonso
- Arias Hernandez, Angel
- Lopez Puente, Jorge
- Loya Lorenzo, Jose Antonio
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Vaz-romero Santero, Alvaro
- Montoya Sancha, Andres
- Del Cuvillo Mezquita, Ramon
- Rodriguez Sereno, Jose Manuel
- Martin Montal, Jordi
- Cimadevilla Diez, Adrian
Ejecución: 01-07-2020 - 30-06-2023
Tipo: Europeo
Financiado por: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
BIOMASKIN-CM-UM3M - Biocompatible Magneto-Active Structures to Simulate Skin Wound Healing: an Experimental-Computational Coupled Approach
- Velasco Bayon, Diego
- Garcia Gonzalez, Daniel
- Arias Hernandez, Angel
- Valencia Blanco, Leticia
- Muñoz Barrutia, Maria Arrate
- Garzon Hernandez, Sara
- Tirado Garcia, Ignacio
- Aranda Izuzquiza, Gonzalo De
Ejecución: 01-01-2020 - 31-03-2022
Tipo: Regional
Financiado por: CAM. CONSEJERÍA DE EDUCACIÓN E INVESTIGACION
881603 - GrapheneCore3: Graphene Flagship Core Project 3
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Vaz-romero Santero, Alvaro
- Montoya Sancha, Andres
- Del Cuvillo Mezquita, Ramon
Ejecución: 01-04-2020 - 30-09-2023
Tipo: Europeo
Financiado por: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
RTI2018-094318-B-I00 - EXPERIMENTACIÓN Y MODELIZACIÓN DEL COMPORTAMIENTO MECÁNICO Y ELÉCTRICO DE ESTRUCTURAS INTELIGENTES DE POLÍMEROS ELECTROACTIVOS
- Arias Hernandez, Angel
- Martinez Tarifa, Juan Manuel
- Navarro Ugena, Carlos
- Robles Muñoz, Guillermo
Ejecución: 01-01-2019 - 30-09-2022
Tipo: Nacional
Financiado por: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Respuesta estructural de panel aeronáutico de antena RX sometido a cargas de impacto. Pedido nº 4300178267/10
- Arias Hernandez, Angel
- Navarro Ugena, Carlos
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Garzon Hernandez, Sara
- Tirado Garcia, Ignacio
Ejecución: 01-01-2018 - 01-03-2018
Tipo: Regional
Financiado por: INDRA SISTEMAS, S.A.
GA- 785219 - GRAPHENE Core 2: Graphene-based revolutions in ICT and beyond
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Del Cuvillo Mezquita, Ramon
Ejecución: 01-04-2018 - 31-03-2020
Tipo: Europeo
Financiado por: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
Connecting 3D printing parameters and mechanical properties of FDM polymers: Experiments and modelling
- Arias Hernandez, Angel
- Garzon Hernandez, Sara
- Garcia Gonzalez, Daniel
Fecha de defensa: 08-11-2019
A continuum mechanics framework for hyperelastic materials: Connecting experiments and modelling
- Arias Hernandez, Angel
- Garcia Gonzalez, Daniel
Fecha de defensa: 30-11-2016
Defensa realizada en: CAMPUS DE LEGANES
Advanced constitutive relations for modeling thermo-viscoplastic behavior of metallic alloys subjected to impact loading
- Arias Hernandez, Angel
- Rodriguez Martinez, Jose Antonio
- Rusinek, Alexis
Fecha de defensa: 19-02-2010
Elastoplastic solids subjected to dynamic tension: New experimental and computational insights
- Rodriguez Martinez, Jose Antonio
- Vaz-romero Santero, Alvaro
- Arias Hernandez, Angel
Fecha de defensa: 05-10-2015
Defensa realizada en: CAMPUS DE LEGANES
Este/a investigador/a no tiene patentes o licencias de software.
Grupos de investigación
Perfiles de investigador/a
-
ORCID
-
Scopus Author ID
-
Dialnet id