The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Cantero Guisandez, Jose Luis jcantero@ing.uc3m.es
Publications
- Articles 23
- Books 0
- Book chapters 0
- Conferences 23
- Working papers 0
- Technical reports 0
- Research projects 18
- Supervised theses 4
- Patent or software license 0
Influence of machining parameters on fretting fatigue life of Inconel 718
- Infante Garcia, Diego
- Diaz Alvarez, Antonio
- Belda Gonzalez, Ricardo
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Giner, E.
- Miguelez Garrido, Maria Henar
International Journal of Fatigue (p. 1-12) - 9/2022
https://doi.org/10.1016/j.ijfatigue.2022.106963 View at source
- EISSN 1879-3452
- ISSN 0142-1123
Machine learning approach in non-intrusive monitoring of tool wear evolution in massive CFRP automatic drilling processes in the aircraft industry
- Dominguez Monferrer, Carlos
- Fernandez Perez, Juan
- Santos Garcia, Raul De
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
JOURNAL OF MANUFACTURING SYSTEMS (p. 622-639) - 10/2022
https://doi.org/10.1016/j.jmsy.2022.10.018 View at source
- EISSN 1878-6642
- ISSN 0278-6125
High-pressure cooling in finishing turning of haynes 282 using carbide tools: Haynes 282 and inconel 718 comparison
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-20) - 11/2021
https://doi.org/10.3390/met11121916 View at source
- ISSN 2075-4701
Combined analysis of wear mechanisms and delamination in CFRP drilling
- Fernandez Perez, Juan
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
COMPOSITE STRUCTURES (p. 1-10) - 1/2021
https://doi.org/10.1016/j.compstruct.2020.112774 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Analysis of orthogonal cutting of biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 1-14) - 2/2020
https://doi.org/10.1016/j.compstruct.2019.111734 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Sustainable high-speed finishing turning of haynes 282 using carbide tools in dry conditions
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-14) - 9/2019
https://doi.org/10.3390/met9090989 View at source
- ISSN 2075-4701
Influencia del nivel de lubricación en el taladrado de apilados híbridos fibra de carbono-titanio aplicando MQL (Mínima Cantidad de Lubricante):monitorización del proceso = Lubrication levels influence on carbon fiber-titanium hybrid stacks drilling applying MQL (Minimum Quantity Lubrication): process monitoring
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
Dyna (p. 579-584) - 9/2019
- EISSN 1989-1490
- ISSN 0012-7361
Hybrid composite-metal stack drilling with different minimum quantity lubrication levels
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
Materials - MDPI (p. 1-13) - 2/2019
https://doi.org/10.3390/ma12030448 View at source
- ISSN 1996-1944
A new cutting device design to study the orthogonal cutting of CFRP laminates at different cutting speeds
- Criado Del Alamo, Victor
- Feito Sanchez, Norberto
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
Materials - MDPI (p. 1-13) - 12/2019
https://doi.org/10.3390/ma12244074 View at source
- ISSN 1996-1944
PCBN Performance in High Speed Finishing Turning of Inconel 718
- Diaz Alvarez, Jose
- Criado Del Alamo, Victor
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Metals - 7/2018
10.3390/met8080582 View at source
- ISSN 2075-4701
This researcher has no books.
This researcher has no book chapters.
Estimation of thermal effects in dry drilling of Ti6Al4V
- Diaz Alvarez, Antonio
- Cruz Hernandez, Jesus Alberto De La
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
Manufacturing Engineering Society International Conference (MESIC 2015) (p. 433-439) - 2015
Editor: ELSEVIER, LTD.
https://doi.org/10.1016/j.proeng.2015.12.516 View at source
- ISBN 1877-705
Numerical modelling of the thermal effects on material in drilling processes Ti6Al4V alloy
- Diaz Alvarez, Jose
- Cruz Hernandez, Jesus Alberto De La
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
Manufacturing Engineering Society International Conference (MESIC 2015) (p. 427-432) - 2015
Editor: ELSEVIER, LTD.
https://doi.org/10.1016/j.proeng.2015.12.515 View at source
- ISBN 1877-705
Influence of tool geometry in drilling of CFRP
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
ECCM16: 16th European Conference on Composite Materials (p. 1-8) - 2014
Implementation of a numerical model to define a bending manufacturing process
- Feito Sanchez, Norberto
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Rodriguez Millan, Marcos
- Lopez Puente, Jorge
- Diaz Alvarez, Jose
Especial Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning at the 22ndCUIEEET, Almadén, Ciudad Real (Spain) (p. 36-41) - 2014
Editor: Trans Tech Publications
https://doi.org/10.4028/www.scientific.net/msf.853.36 View at source
Surface integrity in finishing turning of Inconel 718
- Diaz Alvarez, Jose
- Soldani, Xavier
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
5th Manufacturing Engineering Society International Conference (MESIC 2013) - 2013
3D numerical modelling of machining
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Ahmed Ramadan, Mohamed
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
20th International Conference on Computer Methods in Mechanics - 2013
2D and 3D Approaches to Simulation of Metal and Composite Cutting
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
- Marin Calvo, Nacari Del Carmen
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
4th Manufacturing Engineering Society International Conference (MESIC 2011) (p. 651-659) - 2012
Editor: AMER INST PHYSICS
- ISBN 978-84-615-6973-1
Three-dimensional modeling of machining processes
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Diaz Garcia, Jose Alberto
- Soldani, Xavier
- Cantero Guisandez, Jose Luis
4th Manufacturing Engineering Society International Conference (MESIC 2011) = 4º Congreso Internacional de la Sociedad de Ingeniería de Fabricación (p. 255-260) - 2011
Editor: Trans Tech Publications Ltd.
https://doi.org/10.4028/www.scientific.net/amr.498.255 View at source
- ISBN 1022-6680
Numerical Modeling of Delamination during Machining of LFRP Composites
- Soldani, Xavier
- Santiuste Romero, Carlos
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
18th International Conference on Composite Materials (ICCM18) - 2011
Numerical Analysis of Tool Edge Radius Effect on Orthogonal Dry Machinig Processes of Austenitic Stainless Steels
- Marin Calvo, Nacari Del Carmen
- Cantero Guisandez, Jose Luis
- Canteli Fernandez, Jose Antonio
- Miguelez Garrido, Maria Henar
XI International Conference on Computational Plasticity Fundamentals and Applications (COMPLAS XI) - 2011
- ISBN 978-84-89925-73-1
This researcher has no working papers.
This researcher has no technical reports.
Drilling Process Improvement based on Data Analytics-STEP 3: tool breakage detection and countersinking height monitoring
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 04-07-2023 - 08-01-2024
Type of funding: National
Funding entity: AIRBUS OPERATIONS, S.L.
Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Hernandez Del Valle, Alejandro
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 26-05-2022 - 23-12-2022
Type of funding: International
Funding entity: AIRBUS OPERATIONS, S.L.
PID2020-118480RB-C22 - Análisis de defectos en laminados reforzados con fibras debidos a procesos de fabricación y efecto en el comportamiento a fatiga
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Diaz Alvarez, Jose
Period: 01-09-2021 - 31-08-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
PDC2021-121368- C21 - DIGITDRILL - Digitalization of industrial drilling process
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Antonio
Period: 01-12-2021 - 30-11-2023
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Period: 18-06-2020 - 17-06-2023
Type of funding: Regional
Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES
Drilling process improvement based on data analysis
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Martin Gomez, David
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Gomez Silva, Maria Jose
- Fernandez Perez, Juan
- Dominguez Monferrer, Carlos
- Armingol Robles, Ignacio
- Santos Garcia, Raul De
Period: 18-12-2019 - 31-12-2021
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
Period: 01-01-2018 - 30-09-2021
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
Drilling Processes Improvement for Multi Material CFRP-AL-TI Stacks
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Serrano Dieguez, Fernando
- Feito Sanchez, Norberto
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Fernandez Perez, Juan
Period: 04-04-2016 - 30-06-2019
Type of funding: Regional
Funding entity: AIRBUS DEFENCE AND SPACE S.A.U.
Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 01-01-2012 - 31-12-2013
Type of funding: Regional
Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)
DPI2011-25999 - Modelización del proceso de taladrado de materiales compuestos de fibra de carbono
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Gonzalez Farias, Isabel Marina
- Canteli Fernandez, Jose Antonio
- Cantero Guisandez, Jose Luis
- De La Cruz Hernandez, Jesus Alberto
- Soldani, Xavier
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
Period: 01-01-2012 - 31-12-2014
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
Drilling processes improvement for multi material CFRP-AL-TI stacks
- Fernandez Perez, Juan
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Reading date: 18-12-2020
Análisis del daño térmico del material en el proceso de taladrado en seco de aleaciones de Titanio
- Cantero Guisandez, Jose Luis
- De La Cruz Hernandez, Jesus Alberto
Reading date: 17-09-2015
Reading institution: CAMPUS DE LEGANES
Análisis termodinámico de la influencia del desgaste geométrico de las herramientas en procesos de corte ortogonal de aceros inoxidables austeniticos
- Canteli Fernandez, Jose Antonio
- Marin Calvo, Nacari Del Carmen
- Cantero Guisandez, Jose Luis
Reading date: 14-12-2010
Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
2020
Reading date: 17-12-2020
Reading institution: Universidad Carlos III de Madrid
This researcher has no patents or software licenses.
Researcher profiles
-
ORCID
-
Scopus Author ID