The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Diaz Alvarez, Jose jodiaz@ing.uc3m.es
Publications
- Articles 32
- Books 0
- Book chapters 1
- Conferences 27
- Working papers 0
- Technical reports 0
- Research projects 17
- Supervised theses 1
- Patent or software license 1
Two-Color Pyrometer for Process Temperature Measurement During Machining
- Tapetado Moraleda, Alberto
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Vazquez Garcia, Maria Carmen
JOURNAL OF LIGHTWAVE TECHNOLOGY (p. 1380-1386) - 2/2016
https://doi.org/10.1109/jlt.2015.2513158 View at source
- EISSN 1558-2213
- ISSN 0733-8724
Thermo-Viscoplastic Behavior of Ni-Based Superalloy Haynes 282 and Its Application to Machining Simulation
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Bernier, Richard
- Cantero Guisandez, Jose Luis
- Rusinek, Alexis
- Miguelez Garrido, Maria Henar
Metals - 12/2017
https://doi.org/10.3390/met7120561 View at source
- ISSN 2075-4701
Theoretical estimation of thermal effects in drilling of woven carbon fiber composite
- Diaz Alvarez, Jose
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
Materials - MDPI (p. 4442-4454) - 1/2014
https://doi.org/10.3390/ma7064442 View at source
- ISSN 1996-1944
Temperature Measurement and Numerical Prediction in Machining Inconel 718
- Diaz Alvarez, Jose
- Tapetado Moraleda, Alberto
- Vazquez Garcia, Maria Carmen
- Miguelez Garrido, Maria Henar
Sensors - 6/2017
https://doi.org/10.3390/s17071531 View at source
- EISSN 1424-8220
- ISSN 1424-3210
Sustainable high-speed finishing turning of haynes 282 using carbide tools in dry conditions
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-14) - 9/2019
https://doi.org/10.3390/met9090989 View at source
- ISSN 2075-4701
Relevant factors affecting the direction of crack propagation in complete contact problems under fretting fatigue
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Diaz Alvarez, Jose
- Giner, Eugenio
Tribology International (p. 343-352) - 3/2019
10.1016/j.triboint.2018.10.048 View at source
- EISSN 1879-2464
- ISSN 0301-679X
PCBN Performance in High Speed Finishing Turning of Inconel 718
- Diaz Alvarez, Jose
- Criado Del Alamo, Victor
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Metals - 7/2018
10.3390/met8080582 View at source
- ISSN 2075-4701
Orientation of propagating crack paths emanating from fretting-fatigue contact problems
- Giner, Eugenio
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Miguelez Garrido, Maria Henar
Frattura ed Integrita Strutturale (Frattura ed Integrita Strutturale) (p. 285-294) - 1/2016
https://doi.org/10.3221/igf-esis.35.33 View at source
- ISSN 1971-8993
Numerical analysis of thermomechanical phenomena influencing tool wear in finishing turning of Inconel 718
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Soldani, Xavier
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (p. 161-169) - 5/2014
https://doi.org/10.1016/j.ijmecsci.2014.03.010 View at source
- EISSN 1879-2162
- ISSN 0020-7403
Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 285-294) - 3/2016
https://doi.org/10.1016/j.compstruct.2015.11.065 View at source
- EISSN 1879-1085
- ISSN 0263-8223
This researcher has no books.
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Analysis of machining performance of Inconel 718 printed by PBF-LM (powder bed fusion laser melting).
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Wood, Paul
- Fowdar Gunputh, Urvashi
- Bahi, Slim
- Rusinek, Alexis
- Miguelez Garrido, Maria Henar
XXIII Congreso Nacional Ingeniería Mecánica (CNIM 2020) - 2021
Analysis of fretting fatigue behaviour of an aeroengine nickel-base alloy
- Infante Garcia, Diego
- Giner, E.
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
14th International Conference on Fracture (ICF 14) (p. 853-854) - 2017
Analysis of adiabatic shear banding in machining
- Soldani, Xavier
- Molinari, Alain Louis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
IUTAM Symposium on Materials and Interfaces Under High Strain Rate and Large Deformation<br/><br/> (p. 46) - 2013
Additive manufacturing of head surrogates for impact analysis
- Mantecon Padin, Ramiro
- Rubio Diaz, Ignacio
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
EUROPEAN CONFERENCE ON FRACTURE ECF23. Fracture Mechanics and Structural Integrity (p. 395) - 2022
- ISBN 9788831482189
Additive manufacturing for a Moon village
- Labeaga Azcona, Jose Maria
- Sanjurjo Rivo, Manuel
- Diaz Alvarez, Jose
- Martinez-frias, J.
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 794-801) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.186 View at source
- ISBN 2351-9789
ANÁLISIS DEL COMPORTAMIENTO MECÁNICO DEL MATERIAL PLA IMPRESO CON TÉCNICAS FDM
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
37 Congreso del Grupo Español de Fractura GEF2021 (p. 193-198) - 2021
- ISBN 2792-4246
3D numerical modelling of machining
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Ahmed Ramadan, Mohamed
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
20th International Conference on Computer Methods in Mechanics - 2013
This researcher has no working papers.
This researcher has no technical reports.
Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 01-01-2012 - 31-12-2013
Type of funding: Regional
Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)
DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
Period: 01-01-2018 - 30-09-2021
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
TOOLS
- Ianiro, Andrea
- Discetti, Stefano
- Diaz Alvarez, Jose
- Fajardo Peña, Pablo
- Raiola, Marco
- Sanmiguel Vila, Carlos
- Castellanos Garcia De Blas, Rodrigo
- Foroozan, Firoozeh
Period: 02-10-2017 - 31-12-2019
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
Simulation of mid-scale aerotool (MID-SCALE INNOVATIVE TOOLING ARCHITECTURE. STUDIES) PEGASO
- Ianiro, Andrea
- Discetti, Stefano
- Cobos Perez, Carlos
- Diaz Alvarez, Jose
- Fajardo Peña, Pablo
- Raiola, Marco
- Castellanos Garcia De Blas, Rodrigo
- Cini, Andrea
- Cuellar Martin, Antonio
Period: 07-06-2021 - 07-12-2022
Type of funding: National
Funding entity: AIRBUS OPERATIONS, S.L.
DPI2011-25999 - Modelización del proceso de taladrado de materiales compuestos de fibra de carbono
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Gonzalez Farias, Isabel Marina
- Canteli Fernandez, Jose Antonio
- Cantero Guisandez, Jose Luis
- De La Cruz Hernandez, Jesus Alberto
- Soldani, Xavier
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
Period: 01-01-2012 - 31-12-2014
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
Gemelos digitales para el diseño biomecánico avanzado de protecciones de cabeza en deportes con riesgo de impacto
- Miguelez Garrido, Maria Henar
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Belda Gonzalez, Ricardo
Period: 24-03-2023 - 30-11-2023
Type of funding: National
Funding entity: CONSEJO SUPERIOR DE DEPORTES
740560 - Enhanced Neutralisation of explosive Threats Reaching Across the Plot
- Miguelez Garrido, Maria Henar
- Carpintero Del Barrio, Guillermo
- Loya Lorenzo, Jose Antonio
- Armingol Moreno, Jose Maria
- Vera Coello, Marcos
- Garcia Fernandez, Fernando
- Rodriguez Millan, Marcos
- Aranda Ruiz, Josue
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
Period: 01-05-2017 - 31-10-2020
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
ROTORNEA-CM-UC3M - ESTUDIO Y DISEÑO DE HERRAMIENTAS DE CORTE PARA TORNEADO OBTENIDAS POR IMPRESIÓN 3D CON REFRIGERACIÓN INTERNA (ROTORNEA-CM-UC3M)
- Diaz Alvarez, Antonio
- Fernandez Torrijos, Maria
- Muñoz Sanchez, Ana
- Rodriguez Rodriguez, Francisco Javier
- Ruiz-rivas Hernando, Ulpiano
- Sanchez Gonzalez, Alberto
- Diaz Alvarez, Jose
Period: 01-01-2022 - 31-12-2023
Type of funding: Regional
Funding entity: COMUNIDAD DE MADRID
Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Hernandez Del Valle, Alejandro
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 26-05-2022 - 23-12-2022
Type of funding: International
Funding entity: AIRBUS OPERATIONS, S.L.
Drilling process improvement based on data analysis
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Martin Gomez, David
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Gomez Silva, Maria Jose
- Fernandez Perez, Juan
- Dominguez Monferrer, Carlos
- Armingol Robles, Ignacio
- Santos Garcia, Raul De
Period: 18-12-2019 - 31-12-2021
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
2020
Reading date: 17-12-2020
Reading institution: Universidad Carlos III de Madrid
Researcher profiles
-
ORCID
-
Web of Science ResearcherID
-
Scopus Author ID