The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Diaz Alvarez, Jose jodiaz@ing.uc3m.es
Publications
- Articles 32
- Books 0
- Book chapters 1
- Conferences 27
- Working papers 0
- Technical reports 0
- Research projects 17
- Supervised theses 1
- Patent or software license 1
Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 157-161) - 10/2017
https://doi.org/10.1016/j.compstruct.2017.06.043 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 285-294) - 3/2016
https://doi.org/10.1016/j.compstruct.2015.11.065 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Analysis of orthogonal cutting of biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 1-14) - 2/2020
https://doi.org/10.1016/j.compstruct.2019.111734 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 1147-1155) - 1/2018
https://doi.org/10.1016/j.compstruct.2017.10.061 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental analysis of drilling induced damage in aramid composites
- Diaz Alvarez, Antonio
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 1136-1144) - 10/2018
https://doi.org/10.1016/j.compstruct.2018.05.068 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Combined analysis of wear mechanisms and delamination in CFRP drilling
- Fernandez Perez, Juan
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
COMPOSITE STRUCTURES (p. 1-10) - 1/2021
https://doi.org/10.1016/j.compstruct.2020.112774 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental analysis for stabbing resistance of different aramid composite architectures
- Rodriguez Millan, Marcos
- Diaz Alvarez, Antonio
- Aranda Ruiz, Josue
- Diaz Alvarez, Jose
- Loya Lorenzo, Jose Antonio
COMPOSITE STRUCTURES (p. 525-534) - 1/2019
https://doi.org/10.1016/j.compstruct.2018.10.042 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 700-709) - 2/2019
https://doi.org/10.1016/j.compstruct.2018.11.018 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Influencia del nivel de lubricación en el taladrado de apilados híbridos fibra de carbono-titanio aplicando MQL (Mínima Cantidad de Lubricante):monitorización del proceso = Lubrication levels influence on carbon fiber-titanium hybrid stacks drilling applying MQL (Minimum Quantity Lubrication): process monitoring
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
Dyna (p. 579-584) - 9/2019
- EISSN 1989-1490
- ISSN 0012-7361
Orientation of propagating crack paths emanating from fretting-fatigue contact problems
- Giner, Eugenio
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Miguelez Garrido, Maria Henar
Frattura ed Integrita Strutturale (Frattura ed Integrita Strutturale) (p. 285-294) - 1/2016
https://doi.org/10.3221/igf-esis.35.33 View at source
- ISSN 1971-8993
This researcher has no books.
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
High speed machining of Nickel-based alloys (HRSA) with CBN tools
- Criado Del Alamo, Victor
- Muñoz Vazquez, Victorio
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
13th High Speed Machining Conference (HSM 2016). Progress in Productivity and Quality - 2016
Analysis of fretting fatigue behaviour of an aeroengine nickel-base alloy
- Infante Garcia, Diego
- Giner, E.
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
14th International Conference on Fracture (ICF 14) (p. 853-854) - 2017
Numerical modeling of composite cutting including thermal effects
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
17th International Conference on Composite Structures (ICCS17) - 2013
Countersink depth control in aeronautical structural components drilling processes by machining forces analysis
- Guerra Sancho, Antonio
- Fernandez Perez, Juan
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
2022 8th International Engineering, Sciences and Technology Conference (IESTEC) (p. 715-722) - 2022
Editor: IEEE Press
10.1109/iestec54539.2022.00117 View at source
- ISBN 978-1-6654-9843-2
3D numerical modelling of machining
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Ahmed Ramadan, Mohamed
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
20th International Conference on Computer Methods in Mechanics - 2013
ANÁLISIS DEL COMPORTAMIENTO MECÁNICO DEL MATERIAL PLA IMPRESO CON TÉCNICAS FDM
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
37 Congreso del Grupo Español de Fractura GEF2021 (p. 193-198) - 2021
- ISBN 2792-4246
Surface integrity in finishing turning of Inconel 718
- Diaz Alvarez, Jose
- Soldani, Xavier
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
5th Manufacturing Engineering Society International Conference (MESIC 2013) - 2013
Additive manufacturing for a Moon village
- Labeaga Azcona, Jose Maria
- Sanjurjo Rivo, Manuel
- Diaz Alvarez, Jose
- Martinez-frias, J.
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 794-801) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.186 View at source
- ISBN 2351-9789
Composite fiber reinforced plastic one-shoot drilling: quality inspection assessment and tool wear evaluation
- Fernandez Perez, Jose Luis
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 139-145) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.021 View at source
- ISBN 2351-9789
Numerical modeling of instabilities during machining of aeronautical alloy
- Soldani, Xavier
- Lopez-galvez Muñoz, Hector
- Diaz Alvarez, Jose
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 36-42) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.006 View at source
- ISBN 2351-9789
This researcher has no working papers.
This researcher has no technical reports.
DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
Period: 01-01-2018 - 30-09-2021
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
PID2020-112628RA-I00 - Diseño Integral y Fabricación Aditiva de Implantes Poliméricos Patient-Specific
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Diaz Alvarez, Jose
- Santos Cuadros, Silvia
Period: 01-09-2021 - 31-08-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Drilling process improvement based on data analysis
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Martin Gomez, David
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Gomez Silva, Maria Jose
- Fernandez Perez, Juan
- Dominguez Monferrer, Carlos
- Armingol Robles, Ignacio
- Santos Garcia, Raul De
Period: 18-12-2019 - 31-12-2021
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
PID2020-118480RB-C22 - Análisis de defectos en laminados reforzados con fibras debidos a procesos de fabricación y efecto en el comportamiento a fatiga
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Diaz Alvarez, Jose
Period: 01-09-2021 - 31-08-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
TOOLS
- Ianiro, Andrea
- Discetti, Stefano
- Diaz Alvarez, Jose
- Fajardo Peña, Pablo
- Raiola, Marco
- Sanmiguel Vila, Carlos
- Castellanos Garcia De Blas, Rodrigo
- Foroozan, Firoozeh
Period: 02-10-2017 - 31-12-2019
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
Simulation of mid-scale aerotool (MID-SCALE INNOVATIVE TOOLING ARCHITECTURE. STUDIES) PEGASO
- Ianiro, Andrea
- Discetti, Stefano
- Cobos Perez, Carlos
- Diaz Alvarez, Jose
- Fajardo Peña, Pablo
- Raiola, Marco
- Castellanos Garcia De Blas, Rodrigo
- Cini, Andrea
- Cuellar Martin, Antonio
Period: 07-06-2021 - 07-12-2022
Type of funding: National
Funding entity: AIRBUS OPERATIONS, S.L.
Drilling Process Improvement based on Data Analytics-STEP 3: tool breakage detection and countersinking height monitoring
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 04-07-2023 - 08-01-2024
Type of funding: National
Funding entity: AIRBUS OPERATIONS, S.L.
Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
2020
Reading date: 17-12-2020
Reading institution: Universidad Carlos III de Madrid
Researcher profiles
-
ORCID
-
Web of Science ResearcherID
-
Scopus Author ID