The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Diaz Alvarez, Jose jodiaz@ing.uc3m.es
Publications
- Articles 32
- Books 0
- Book chapters 1
- Conferences 27
- Working papers 0
- Technical reports 0
- Research projects 17
- Supervised theses 1
- Patent or software license 1
Influence of machining parameters on fretting fatigue life of Inconel 718
- Infante Garcia, Diego
- Diaz Alvarez, Antonio
- Belda Gonzalez, Ricardo
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Giner, E.
- Miguelez Garrido, Maria Henar
International Journal of Fatigue (p. 1-12) - 9/2022
https://doi.org/10.1016/j.ijfatigue.2022.106963 View at source
- EISSN 1879-3452
- ISSN 0142-1123
Experimental assessment of thermal gradients and layout effects on the mechanical performance of components manufactured by fused deposition modeling
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Castellanos Garcia De Blas, Rodrigo
- Diaz Alvarez, Jose
RAPID PROTOTYPING JOURNAL - 4/2022
10.1108/rpj-12-2021-0329 View at source
- ISSN 1355-2546
Additive Manufacturing and Mechanical Characterization of PLA-Based Skull Surrogates
- Mantecon Padin, Ramiro
- Marco Esteban, Miguel
- Muñoz Sanchez, Ana
- Youssef, George
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
Polymers - 12/2022
https://doi.org/10.3390/polym15010058 View at source
- ISSN 2073-4360
High-pressure cooling in finishing turning of haynes 282 using carbide tools: Haynes 282 and inconel 718 comparison
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-20) - 11/2021
https://doi.org/10.3390/met11121916 View at source
- ISSN 2075-4701
Drilling of biocomposite materials: Modelling and experimental validation
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
SIMULATION MODELLING PRACTICE AND THEORY (p. 1-15) - 1/2021
https://doi.org/10.1016/j.simpat.2020.102203 View at source
- EISSN 1878-1462
- ISSN 1569-190X
Combined analysis of wear mechanisms and delamination in CFRP drilling
- Fernandez Perez, Juan
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
COMPOSITE STRUCTURES (p. 1-10) - 1/2021
https://doi.org/10.1016/j.compstruct.2020.112774 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Analysis of orthogonal cutting of biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 1-14) - 2/2020
https://doi.org/10.1016/j.compstruct.2019.111734 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Machinability of INCONEL718 Alloy with a Porous Microstructure Produced by Laser Melting Powder Bed Fusion at Higher Energy Densities
- Wood, Paul
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Rusinek, Alexis
- Gunputh, Urvashi F.
- Williams, Gavin
- Bahi, Slim
- Sienkiewicz, Judyta
- Platek, Pawel
Materials - MDPI - 12/2020
https://doi.org/10.3390/ma13245730 View at source
- ISSN 1996-1944
Sustainable high-speed finishing turning of haynes 282 using carbide tools in dry conditions
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-14) - 9/2019
https://doi.org/10.3390/met9090989 View at source
- ISSN 2075-4701
Influencia del nivel de lubricación en el taladrado de apilados híbridos fibra de carbono-titanio aplicando MQL (Mínima Cantidad de Lubricante):monitorización del proceso = Lubrication levels influence on carbon fiber-titanium hybrid stacks drilling applying MQL (Minimum Quantity Lubrication): process monitoring
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
Dyna (p. 579-584) - 9/2019
- EISSN 1989-1490
- ISSN 0012-7361
This researcher has no books.
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Additive manufacturing of head surrogates for impact analysis
- Mantecon Padin, Ramiro
- Rubio Diaz, Ignacio
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
EUROPEAN CONFERENCE ON FRACTURE ECF23. Fracture Mechanics and Structural Integrity (p. 395) - 2022
- ISBN 9788831482189
Countersink depth control in aeronautical structural components drilling processes by machining forces analysis
- Guerra Sancho, Antonio
- Fernandez Perez, Juan
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
2022 8th International Engineering, Sciences and Technology Conference (IESTEC) (p. 715-722) - 2022
Editor: IEEE Press
10.1109/iestec54539.2022.00117 View at source
- ISBN 978-1-6654-9843-2
Cyclic Mechanical Behaviour of Poly Lactic Acid Scaffolds Made by Additive Manufacturing
- Rufo Martin, Celia
- Infante Garcia, Diego
- Diaz Alvarez, Jose
- Giner, Eugenio
- Miguelez Garrido, Maria Henar
IbCSI 2022: 5th Iberian Conference on Structural Integrity (p. 3-8) - 2022
Editor: S.E.I.E. GRUPO ESPAÑOL DE FRACTURA
- ISBN 2792-4246
ANÁLISIS DEL COMPORTAMIENTO MECÁNICO DEL MATERIAL PLA IMPRESO CON TÉCNICAS FDM
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
37 Congreso del Grupo Español de Fractura GEF2021 (p. 193-198) - 2021
- ISBN 2792-4246
Analysis of machining performance of Inconel 718 printed by PBF-LM (powder bed fusion laser melting).
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Wood, Paul
- Fowdar Gunputh, Urvashi
- Bahi, Slim
- Rusinek, Alexis
- Miguelez Garrido, Maria Henar
XXIII Congreso Nacional Ingeniería Mecánica (CNIM 2020) - 2021
Tool wear and induced damage in CFRP drilling with step and double point angle drill bits
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
8th Manufacturing Engineering Society International Conference, MESIC 2019 (p. 610-617) - 2019
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2019.09.049 View at source
- ISBN 2351-9789
Calidad e integridad del componente en procesos de escariado de apilados híbridos
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
XXII Congreso Nacional de Ingeniería Mecánica (CNIM) (p. 482) - 2018
Editor: UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA (UNED)
- ISBN 0212-5072
Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 634-637) - 2018
Editor: ELSEVIER
https://doi.org/10.1016/j.procir.2018.08.189 View at source
- ISBN 2212-8271
Composite fiber reinforced plastic one-shoot drilling: quality inspection assessment and tool wear evaluation
- Fernandez Perez, Jose Luis
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 139-145) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.021 View at source
- ISBN 2351-9789
Analysis of fretting fatigue behaviour of an aeroengine nickel-base alloy
- Infante Garcia, Diego
- Giner, E.
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
14th International Conference on Fracture (ICF 14) (p. 853-854) - 2017
This researcher has no working papers.
This researcher has no technical reports.
Drilling process improvement based on data analysis
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Martin Gomez, David
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Gomez Silva, Maria Jose
- Fernandez Perez, Juan
- Dominguez Monferrer, Carlos
- Armingol Robles, Ignacio
- Santos Garcia, Raul De
Period: 18-12-2019 - 31-12-2021
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
Period: 01-01-2018 - 30-09-2021
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
TOOLS
- Ianiro, Andrea
- Discetti, Stefano
- Diaz Alvarez, Jose
- Fajardo Peña, Pablo
- Raiola, Marco
- Sanmiguel Vila, Carlos
- Castellanos Garcia De Blas, Rodrigo
- Foroozan, Firoozeh
Period: 02-10-2017 - 31-12-2019
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
740560 - Enhanced Neutralisation of explosive Threats Reaching Across the Plot
- Miguelez Garrido, Maria Henar
- Carpintero Del Barrio, Guillermo
- Loya Lorenzo, Jose Antonio
- Armingol Moreno, Jose Maria
- Vera Coello, Marcos
- Garcia Fernandez, Fernando
- Rodriguez Millan, Marcos
- Aranda Ruiz, Josue
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
Period: 01-05-2017 - 31-10-2020
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
Drilling Processes Improvement for Multi Material CFRP-AL-TI Stacks
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Serrano Dieguez, Fernando
- Feito Sanchez, Norberto
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Fernandez Perez, Juan
Period: 04-04-2016 - 30-06-2019
Type of funding: Regional
Funding entity: AIRBUS DEFENCE AND SPACE S.A.U.
Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 01-01-2012 - 31-12-2013
Type of funding: Regional
Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)
DPI2011-25999 - Modelización del proceso de taladrado de materiales compuestos de fibra de carbono
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Gonzalez Farias, Isabel Marina
- Canteli Fernandez, Jose Antonio
- Cantero Guisandez, Jose Luis
- De La Cruz Hernandez, Jesus Alberto
- Soldani, Xavier
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
Period: 01-01-2012 - 31-12-2014
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
2020
Reading date: 17-12-2020
Reading institution: Universidad Carlos III de Madrid
Researcher profiles
-
ORCID
-
Web of Science ResearcherID
-
Scopus Author ID