The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Diaz Alvarez, Jose jodiaz@ing.uc3m.es
Publications
- Articles 32
- Books 0
- Book chapters 1
- Conferences 27
- Working papers 0
- Technical reports 0
- Research projects 17
- Supervised theses 1
- Patent or software license 1
Analysis of tool wear patterns in finishing turning of Inconel 718
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Marin Calvo, Nacari Del Carmen
WEAR (p. 885-894) - 1/2013
https://doi.org/10.1016/j.wear.2012.11.004 View at source
- EISSN 1873-2577
- ISSN 0043-1648
Theoretical estimation of thermal effects in drilling of woven carbon fiber composite
- Diaz Alvarez, Jose
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
Materials - MDPI (p. 4442-4454) - 1/2014
https://doi.org/10.3390/ma7064442 View at source
- ISSN 1996-1944
Modelling thermal effects in machining of carbon fiber reinforced polymer composites
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (p. 758-766) - 4/2014
https://doi.org/10.1177/0731684413515956 View at source
- ISSN 0731-6844
Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Materials - MDPI (p. 4258-4271) - 5/2014
https://doi.org/10.3390/ma7064258 View at source
- ISSN 1996-1944
Numerical analysis of thermomechanical phenomena influencing tool wear in finishing turning of Inconel 718
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Soldani, Xavier
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (p. 161-169) - 5/2014
https://doi.org/10.1016/j.ijmecsci.2014.03.010 View at source
- EISSN 1879-2162
- ISSN 0020-7403
Orientation of propagating crack paths emanating from fretting-fatigue contact problems
- Giner, Eugenio
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Miguelez Garrido, Maria Henar
Frattura ed Integrita Strutturale (Frattura ed Integrita Strutturale) (p. 285-294) - 1/2016
https://doi.org/10.3221/igf-esis.35.33 View at source
- ISSN 1971-8993
Two-Color Pyrometer for Process Temperature Measurement During Machining
- Tapetado Moraleda, Alberto
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Vazquez Garcia, Maria Carmen
JOURNAL OF LIGHTWAVE TECHNOLOGY (p. 1380-1386) - 2/2016
https://doi.org/10.1109/jlt.2015.2513158 View at source
- EISSN 1558-2213
- ISSN 0733-8724
Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 285-294) - 3/2016
https://doi.org/10.1016/j.compstruct.2015.11.065 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 157-161) - 10/2017
https://doi.org/10.1016/j.compstruct.2017.06.043 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Thermo-Viscoplastic Behavior of Ni-Based Superalloy Haynes 282 and Its Application to Machining Simulation
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Bernier, Richard
- Cantero Guisandez, Jose Luis
- Rusinek, Alexis
- Miguelez Garrido, Maria Henar
Metals - 12/2017
https://doi.org/10.3390/met7120561 View at source
- ISSN 2075-4701
This researcher has no books.
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Damage prediction in composite milling
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Feito Sanchez, Norberto
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
IV ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES2013) - 2013
Numerical modeling of composite cutting including thermal effects
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
17th International Conference on Composite Structures (ICCS17) - 2013
Surface integrity in finishing turning of Inconel 718
- Diaz Alvarez, Jose
- Soldani, Xavier
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
5th Manufacturing Engineering Society International Conference (MESIC 2013) - 2013
Analysis of adiabatic shear banding in machining
- Soldani, Xavier
- Molinari, Alain Louis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
IUTAM Symposium on Materials and Interfaces Under High Strain Rate and Large Deformation<br/><br/> (p. 46) - 2013
3D numerical modelling of machining
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Ahmed Ramadan, Mohamed
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
20th International Conference on Computer Methods in Mechanics - 2013
Influence of tool geometry in drilling of CFRP
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
ECCM16: 16th European Conference on Composite Materials (p. 1-8) - 2014
Implementation of a numerical model to define a bending manufacturing process
- Feito Sanchez, Norberto
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Rodriguez Millan, Marcos
- Lopez Puente, Jorge
- Diaz Alvarez, Jose
Especial Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning at the 22ndCUIEEET, Almadén, Ciudad Real (Spain) (p. 36-41) - 2014
Editor: Trans Tech Publications
https://doi.org/10.4028/www.scientific.net/msf.853.36 View at source
Optical fiber pyrometer positioning accuracy during machining
- Tapetado Moraleda, Alberto
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Vazquez Garcia, Maria Carmen
Primera Feria de Otoño de Jóvenes investigadores del programa de actividades Sensores e Instrumentación en tecnologías FOTÓNicas (SINFOTON 2015) (p. 4-4) - 2015
Influence of special tool geometry in drilling woven CFRPs materials
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Manufacturing Engineering Society International Conference (MESIC 2015) (p. 632-638) - 2015
Editor: ELSEVIER B.V.
https://doi.org/10.1016/j.proeng.2015.12.541 View at source
- ISBN 1877-7058
Orientación de grietas de propagación en problemas de contacto en fretting-fatiga
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Giner, Eugenio
XXXII Encuentro del Grupo Español de Fractura (p. 436-441) - 2015
Editor: S.E.I.E. GRUPO ESPAÑOL DE FRACTURA
- ISBN 0213-3725
This researcher has no working papers.
This researcher has no technical reports.
PID2020-112628RA-I00 - Diseño Integral y Fabricación Aditiva de Implantes Poliméricos Patient-Specific
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Diaz Alvarez, Jose
- Santos Cuadros, Silvia
Period: 01-09-2021 - 31-08-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
PID2020-118480RB-C22 - Análisis de defectos en laminados reforzados con fibras debidos a procesos de fabricación y efecto en el comportamiento a fatiga
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Diaz Alvarez, Jose
Period: 01-09-2021 - 31-08-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
ROTORNEA-CM-UC3M - ESTUDIO Y DISEÑO DE HERRAMIENTAS DE CORTE PARA TORNEADO OBTENIDAS POR IMPRESIÓN 3D CON REFRIGERACIÓN INTERNA (ROTORNEA-CM-UC3M)
- Diaz Alvarez, Antonio
- Fernandez Torrijos, Maria
- Muñoz Sanchez, Ana
- Rodriguez Rodriguez, Francisco Javier
- Ruiz-rivas Hernando, Ulpiano
- Sanchez Gonzalez, Alberto
- Diaz Alvarez, Jose
Period: 01-01-2022 - 31-12-2023
Type of funding: Regional
Funding entity: COMUNIDAD DE MADRID
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Period: 16-06-2022 - 15-06-2023
Type of funding: Regional
Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.
Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Hernandez Del Valle, Alejandro
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 26-05-2022 - 23-12-2022
Type of funding: International
Funding entity: AIRBUS OPERATIONS, S.L.
Drilling Process Improvement based on Data Analytics-STEP 3: tool breakage detection and countersinking height monitoring
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 04-07-2023 - 08-01-2024
Type of funding: National
Funding entity: AIRBUS OPERATIONS, S.L.
Gemelos digitales para el diseño biomecánico avanzado de protecciones de cabeza en deportes con riesgo de impacto
- Miguelez Garrido, Maria Henar
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Belda Gonzalez, Ricardo
Period: 24-03-2023 - 30-11-2023
Type of funding: National
Funding entity: CONSEJO SUPERIOR DE DEPORTES
Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
2020
Reading date: 17-12-2020
Reading institution: Universidad Carlos III de Madrid
Researcher profiles
-
ORCID
-
Web of Science ResearcherID
-
Scopus Author ID