The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Miguelez Garrido, Maria Henar mhmiguel@ing.uc3m.es
Publications
- Articles 80
- Books 1
- Book chapters 3
- Conferences 80
- Working papers 0
- Technical reports 0
- Research projects 25
- Supervised theses 9
- Patent or software license 1
A new approach for time-space wear modeling applied to machining tool wear
- Ramirez Paredes, Fernando
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
WEAR (p. 125-134) - 11/2017
https://doi.org/10.1016/j.wear.2017.07.015 View at source
- EISSN 1873-2577
- ISSN 0043-1648
Analysis of tool wear patterns in finishing turning of Inconel 718
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Marin Calvo, Nacari Del Carmen
WEAR (p. 885-894) - 1/2013
https://doi.org/10.1016/j.wear.2012.11.004 View at source
- EISSN 1873-2577
- ISSN 0043-1648
Numerical analysis of the influence of micro-voids on fretting fatigue crack initiation lifetime
- Infante Garcia, Diego
- Giner, Eugenio
- Miguelez Garrido, Maria Henar
- Wahab, Magd Abdel
Tribology International (p. 121-129) - 7/2019
10.1016/j.triboint.2019.02.032 View at source
- EISSN 1879-2464
- ISSN 0301-679X
Experimental analysis of drilling induced damage in biocomposites
- Diaz Alvarez, Antonio
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
TEXTILE RESEARCH JOURNAL (p. 2544-2558) - 11/2018
10.1177/0040517517725118 View at source
- ISSN 0040-5175
Postmortem analysis using different sensors and technologies on aramid composites samples after ballistic impact
- Rubio Diaz, Ignacio
- Diaz Alvarez, Antonio
- Bernier, Richard
- Rusinek, Alexis
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Rodriguez Millan, Marcos
Sensors (p. 1-16) - 5/2020
https://doi.org/10.3390/s20102853 View at source
- EISSN 1424-8220
- ISSN 1424-3210
Temperature Measurement and Numerical Prediction in Machining Inconel 718
- Diaz Alvarez, Jose
- Tapetado Moraleda, Alberto
- Vazquez Garcia, Maria Carmen
- Miguelez Garrido, Maria Henar
Sensors - 6/2017
https://doi.org/10.3390/s17071531 View at source
- EISSN 1424-8220
- ISSN 1424-3210
C. Vázquez, A. Tapetado, H. Miguélez. Monitoring temperature on machining processes is enhanced using optical fibers
- Vazquez Garcia, Maria Carmen
- Tapetado Moraleda, Alberto
- Miguelez Garrido, Maria Henar
SPIE Newsroom - 7/2014
https://doi.org/10.1117/2.1201406.005510 View at source
- ISSN 1818-2259
Numerical analysis of the tool wear effect in the machining induced residual stresses
- Muñoz Sanchez, Ana
- Canteli Fernandez, Jose Antonio
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
SIMULATION MODELLING PRACTICE AND THEORY (p. 872-886) - 2/2011
https://doi.org/10.1016/j.simpat.2010.11.011 View at source
- EISSN 1878-1462
- ISSN 1569-190X
El fenómeno de cut-out en fractura intertrocantérica de fémur: análisis mediante modelo de elementos finitos = The cut-out phenomenon in intertrochanteric femur fracture: analysis using a finite element model
- Arias Blanco, Adrian
- Marco Esteban, Miguel
- Giner, E.
- Miguelez Garrido, Maria Henar
- Caeiro-rey, J. R.
- Larrainzar-garijo, R.
Revista de Osteoporosis y Metabolismo Mineral (p. 21-31) - 1/2021
https://doi.org/10.4321/s1889-836x2021000100005 View at source
- EISSN 2173-2345
- ISSN 1889-836X
Analysis of mechanical behavior variation in the proximal femur using X-FEM (Extended Finite Element Method) = Análisis de la variación del comportamiento mecánico de la extremidad proximal del fémur mediante el método XFEM (eXtended FiniteElement Method)
- Marco Esteban, Miguel
- Giner, E.
- Larrainzar, R.
- Caeiro, J.r.
- Miguelez Garrido, Maria Henar
Revista de Osteoporosis y Metabolismo Mineral (p. 61-68) - 6/2016
10.4321/s1889-836x2016000200003 View at source
- EISSN 2173-2345
- ISSN 1889-836X
Metodología de elaboración de Trabajos de Fin de Grado y Postgrado relacionados con líneas de investigación de interés para la Guardia Civil
- Moure Colon, Fernando
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
2015
Editor: CENTRO UNIVERSITARIO DE LA GUARDIA CIVIL
- ISBN 978-84-943219-1-7
Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
Wiley Encyclopedia of Composites (p. 1-14) - 7/2012
Editor: WILEY
https://doi.org/10.1002/9781118097298.weoc200 View at source
- ISBN 978-1-11-809729-8
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
Fiber-Reinforced Composites (p. 497-526) - 10/2012
Editor: NOVA SCIENCE PUBLISHERS INC
- ISBN 978-1-61470-433-1
Modeling of impact dynamics and application in public security education
- Rodriguez Millan, Marcos
- Marco Esteban, Miguel
- Loya Lorenzo, Jose Antonio
- Moure, Fernando
- Miguelez Garrido, Maria Henar
EduRe15: International Conference on Education, Social and Technological Sciences<br/> (p. 1-21) - 2016
Editor: UNIVERSITAT POLITÈCNICA DE VALÈNCIA
https://doi.org/10.4995/muse.2016.3693 View at source
- ISBN 2341-2593
Additive manufacturing of head surrogates for impact analysis
- Mantecon Padin, Ramiro
- Rubio Diaz, Ignacio
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
EUROPEAN CONFERENCE ON FRACTURE ECF23. Fracture Mechanics and Structural Integrity (p. 395) - 2022
- ISBN 9788831482189
Influence of tool geometry in drilling of CFRP
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
ECCM16: 16th European Conference on Composite Materials (p. 1-8) - 2014
CFRP drilling process control based on spindle power consumption from real production data in the aircraft industry
- Dominguez Monferrer, Carlos
- Fernandez Perez, Juan
- Santos Garcia, Raul De
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
CMS 2022: 55th CIRP Conference on Manufacturing Systems (p. 1533-1538) - 2022
Editor: ELSEVIER
https://doi.org/10.1016/j.procir.2022.05.187 View at source
- ISBN 2212-8271
Experimental and numerical analysis of combat helmet ballistic performance
- Rodriguez Millan, Marcos
- Rubio Diaz, Ignacio
- Moure Cuadrado, Marta Maria
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
Auxdefense 2018: 1st World Conference on Advanced Materials for Defense - 2018
A phantom-node approach to model fracture propagation in cortical bone tissue considering its heterogeneous microstructure
- Marco Esteban, Miguel
- Belda, Ricardo
- Miguelez Garrido, Maria Henar
- Giner, Eugenio
8th World conference european society of biomechanics - 2018
Tool wear and induced damage in CFRP drilling with step and double point angle drill bits
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
8th Manufacturing Engineering Society International Conference, MESIC 2019 (p. 610-617) - 2019
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2019.09.049 View at source
- ISBN 2351-9789
Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 634-637) - 2018
Editor: ELSEVIER
https://doi.org/10.1016/j.procir.2018.08.189 View at source
- ISBN 2212-8271
Influence of the undeformed chip cross section in finishing turning of Inconel 718 with PCBN tools
- Infante Garcia, Diego
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Muñoz Sanchez, Ana
- Miguelez Garrido, Maria Henar
8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 122-125) - 2018
Editor: ELSEVIER
Composite fiber reinforced plastic one-shoot drilling: quality inspection assessment and tool wear evaluation
- Fernandez Perez, Jose Luis
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 139-145) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.021 View at source
- ISBN 2351-9789
This researcher has no working papers.
This researcher has no technical reports.
RTC-2015-3887-8 - Diseño avanzado y fabricación de protecciones personales integrales de uso militar y para Fuerzas y Cuerpos de Seguridad del Estado (PROTEC_DAF)
- Miguelez Garrido, Maria Henar
- Loya Lorenzo, Jose Antonio
- Santiuste Romero, Carlos
- Rodriguez Millan, Marcos
Period: 25-02-2015 - 31-03-2019
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
740560 - Enhanced Neutralisation of explosive Threats Reaching Across the Plot
- Miguelez Garrido, Maria Henar
- Carpintero Del Barrio, Guillermo
- Loya Lorenzo, Jose Antonio
- Armingol Moreno, Jose Maria
- Vera Coello, Marcos
- Garcia Fernandez, Fernando
- Rodriguez Millan, Marcos
- Aranda Ruiz, Josue
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
Period: 01-05-2017 - 31-10-2020
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Hernandez Del Valle, Alejandro
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 26-05-2022 - 23-12-2022
Type of funding: International
Funding entity: AIRBUS OPERATIONS, S.L.
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Period: 16-06-2022 - 15-06-2023
Type of funding: Regional
Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.
CCG07-UC3M/DPI-3396 - Predicción de tensiones residuales y desgaste de herramienta en procesos de corte ortogonal, mediante simulación numérica
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Gonzalez Farias, Isabel Marina
- Cantero Guisandez, Jose Luis
- Muñoz Abella, Maria Belen
- Rubio Ruiz De Aguirre, Maria Lourdes
- Cheriguene, Rachid
- Marin Calvo, Nacari Del Carmen
- Loaiza Santoya, Gustavo Adolfo
Period: 01-01-2008 - 31-12-2008
Type of funding: Regional
Funding entity: COMUNIDAD DE MADRID-UC3M
CS-GA-2013-632434 - CRASHING: Characterization of Structural Behaviour for High Frequency Phenomena
- Claudio Lopes (Investigador principal (IP))
- MOLINA ALDAREGUIA, Jon Mikel (Investigador/a)
Period: 01-04-2014 - 30-09-2016
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
- iMarina
- UC3M
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Period: 18-06-2020 - 17-06-2023
Type of funding: Regional
Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES
CCG08-UC3M/DPI-4494 - CP08: Taladro en seco de la aleación Ti6Al4V: Análisis del daño térmico y del desgaste de herramientas mediante técnicas experimentales y simulación numérica
- Cantero Guisandez, Jose Luis
- Muñoz Sanchez, Ana
- Gonzalez Farias, Isabel Marina
- Muñoz Abella, Maria Belen
- Miguelez Garrido, Maria Henar
- Cheriguene, Rachid
- Marin Calvo, Nacari Del Carmen
- Loaiza Santoya, Gustavo Adolfo
- Soldani, Xavier
Period: 01-01-2009 - 31-12-2009
Funding entity: COMUNIDAD DE MADRID-UC3M
Drilling process improvement based on data analysis
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Martin Gomez, David
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Gomez Silva, Maria Jose
- Fernandez Perez, Juan
- Dominguez Monferrer, Carlos
- Armingol Robles, Ignacio
- Santos Garcia, Raul De
Period: 18-12-2019 - 31-12-2021
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Loya Lorenzo, Jose Antonio
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
- Cheriguene, Rachid
- Puerta Hueso, Sergio
- Puerta Del Nuevo, Jose
- Soldani, Xavier
Period: 05-03-2009 - 20-05-2009
Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.
Análisis experimental y numérico del taladrado de<br/> materiales compuestos .
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
Reading date: 24-11-2017
Modelización de la evolución del desgaste en herramientas de corte
- Miguelez Garrido, Maria Henar
- Ramirez Paredes, Fernando
- Soldani, Xavier
Reading date: 08-10-2015
Reading institution: CAMPUS DE LEGANES
Análisis experimental y numérico de la fractura de<br/> fémur humano
- Marco Esteban, Miguel
- Miguelez Garrido, Maria Henar
- Giner Maravilla, Eugenio
Reading date: 27-01-2017
Formulación de un algoritmo eficiente de integración de un modelo de daño isótropo y validación en condiciones dinámicas
- Marino Romero, Javier
- Miguelez Garrido, Maria Henar
Reading date: 04-02-2016
Drilling processes improvement for multi material CFRP-AL-TI stacks
- Fernandez Perez, Juan
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Reading date: 18-12-2020
Analysis of relevant factors affecting fretting fatigue behaviour of aeronautical alloys
- Infante Garcia, Diego
- Miguelez Garrido, Maria Henar
- Giner Maravilla, Eugenio
Reading date: 11-12-2020
Análisis Experimental y Numérico del Proceso de Taladrado de Materiales Compuestos de Fibra de Carbono
- Feito Sanchez, Norberto
- Miguelez Garrido, Maria Henar
Reading date: 11-07-2016
Reading institution: CAMPUS DE LEGANES
Análisis experimental y numérico de las tensiones residuales debidas a mecanizado en aceros inoxidables austeníticos
- Canteli Fernandez, Jose Antonio
- Muñoz Sanchez, Ana
- Miguelez Garrido, Maria Henar
Reading date: 09-12-2008
Reading institution: CAMPUS DE LEGANES
Researcher profiles
-
ORCID
-
Scopus Author ID