The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Muñoz Sanchez, Ana amsanche@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

Open Access

Study of the Influence of Tool Wear of Two Drill Bits Manufactured with Different Coating Processes in Drilling Carbon/Glass Fiber Hybrid Composite Bounded with Epoxy Polymer.

  • Gutiérrez, Santiago Carlos
  • Meseguer, María Desamparados
  • Muñoz Sanchez, Ana
  • Feito Sanchez, Norberto

Coatings (p. 1-16) - 8/2023

https://doi.org/10.3390/coatings13081440 View at source

  • ISSN 2079-6412
Open Access

Modular 3-D-Printed Education Tool for Blind and Visually Impaired Students Oriented to Net Structures

  • Dominguez Reyes, Ricardo
  • Moreno Lopez, Lourdes
  • Muñoz Sanchez, Ana
  • Ruiz Mezcua, Maria Belen
  • Savoini Cardiel, Begoña

IEEE TRANSACTIONS ON EDUCATION (p. 55-61) - 2/2023

10.1109/te.2022.3183244 View at source

  • EISSN 1557-9638
  • ISSN 0018-9359

Additive Manufacturing and Mechanical Characterization of PLA-Based Skull Surrogates

  • Mantecon Padin, Ramiro
  • Marco Esteban, Miguel
  • Muñoz Sanchez, Ana
  • Youssef, George
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

Polymers - 12/2022

https://doi.org/10.3390/polym15010058 View at source

  • ISSN 2073-4360
Open Access

Analysis of the Machinability of Carbon Fiber Composite Materials in Function of Tool Wear and Cutting Parameters Using the Artificial Neural Network Approach

  • Feito Sanchez, Norberto
  • Muñoz Sanchez, Ana
  • Diaz Alvarez, Antonio
  • Loya Lorenzo, Jose Antonio

Materials - MDPI (p. 1-13) - 9/2019

https://doi.org/10.3390/ma12172747 View at source

  • ISSN 1996-1944
Open Access

Numerical modelling of ballistic impact response at low velocity in aramid fabrics

  • Feito Sanchez, Norberto
  • Loya Lorenzo, Jose Antonio
  • Muñoz Sanchez, Ana
  • Das, Raj

Materials - MDPI (p. 1-15) - 6/2019

https://doi.org/10.3390/ma12132087 View at source

  • ISSN 1996-1944
Open Access

Multi-objective optimization analysis of cutting parameters when drilling composite materials with special geometry drills

  • Feito Sanchez, Norberto
  • Muñoz Sanchez, Ana
  • Diaz Alvarez, Antonio
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES - 10/2019

10.1016/j.compstruct.2019.111187 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Drilling optimization of woven CFRP Laminates under different tool wear conditions: a multi-objective design of experiments approach

  • Feito Sanchez, Norberto
  • Milani, A.s.
  • Muñoz Sanchez, Ana

STRUCTURAL AND MULTIDISCIPLINARY OPTIMIZATION (p. 239-251) - 2/2016

https://doi.org/10.1007/s00158-015-1324-y View at source

  • EISSN 1615-1488
  • ISSN 1615-147X

Influence of tool geometry and numerical parameters when modeling orthogonal cutting of LFRP composites

  • Soldani, Xavier
  • Santiuste Romero, Carlos
  • Muñoz Sanchez, Ana
  • Miguelez Garrido, Maria Henar

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (p. 1205-1216) - 9/2011

https://doi.org/10.1016/j.compositesa.2011.04.023 View at source

  • EISSN 1878-5840
  • ISSN 1359-835X

Hybrid FE/ANN and LPR approach for the inverse identification of material parameters from cutting tests

  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

INTERNATIONAL JOURNAL OF ADVANCED MANUFACTURING TECHNOLOGY (p. 21-33) - 4/2011

https://doi.org/10.1007/s00170-010-2922-x View at source

  • EISSN 1433-3015
  • ISSN 0268-3768

Numerical analysis of the tool wear effect in the machining induced residual stresses

  • Muñoz Sanchez, Ana
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

SIMULATION MODELLING PRACTICE AND THEORY (p. 872-886) - 2/2011

https://doi.org/10.1016/j.simpat.2010.11.011 View at source

  • EISSN 1878-1462
  • ISSN 1569-190X

This researcher has no books.

This researcher has no book chapters.

Material characterization of basalt and carbon laminates with and without open-hole under static and fatigue loads

  • Quiñonero, Antonio Ramon
  • Muñoz Sanchez, Ana
  • Diaz Alvarez, Antonio
  • Navarro, Maria Dolores
  • Feito Sanchez, Norberto

8th International Conference on Mechanics of Composites - 2023

Study of the influence of tool wear in drilling carbon-glass fiber hybrid composite

  • Gutierrez Rubert, Santiago Carlos
  • Meseguer Calas, Maria Desamparados
  • Muñoz Sanchez, Ana
  • Feito Sanchez, Norberto

10th Manufacturing Engineering Society International Conference, Sevilla, Spain - 2023

Open Access

Experiencia de la adaptación de la asignatura Expresión Gráfica en la Ingeniería a la docencia online en tiempos de confinamiento

  • Alvarez Caldas, Carolina
  • Calvo Ramos, Jose Antonio
  • Santos Cuadros, Silvia
  • Muñoz Sanchez, Ana
  • Meneses Alonso, Jesus
  • Barba Nieto, Alvaro
  • Gomez Amador, Ana Maria
  • Infante Garcia, Diego
  • Jimenez Salas, Manuel
  • De Opazo Olano, Victoria
  • De La Prida Caballero, Ruben
  • Ramirez Berasategui, Maria Beatriz
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Sanchez De Rojas Fernandez, Noelia
  • Viadero Monasterio, Fernando
  • Zhu, Taomei
... View more Collapse

XXIII Congreso Nacional de Ingeniería Mecánica (p. 124) - 2022

  • ISBN ISSN: 0212-5072
Open Access

Educational Resources for Self-learning of Descriptive Geometry

  • Alvarez Caldas, Carolina
  • Garcia Prada, Juan Carlos
  • Meneses Alonso, Jesus
  • Santos Cuadros, Silvia
  • Gomez Amador, Ana Maria
  • Diaz Alvarez, Antonio
  • Calvo Ramos, Jose Antonio
  • Muñoz Sanchez, Ana
... View more Collapse

2nd International Symposium on the Education and Mechanism and Machine Science (ISEMMS 2017) (p. 186-194) - 9/2019

Editor: SPRINGER

https://doi.org/10.1007/978-3-030-00108-7_21 View at source

  • ISBN 978-3-030-00107-0
Open Access

Influence of the undeformed chip cross section in finishing turning of Inconel 718 with PCBN tools

  • Infante Garcia, Diego
  • Diaz Alvarez, Antonio
  • Cantero Guisandez, Jose Luis
  • Muñoz Sanchez, Ana
  • Miguelez Garrido, Maria Henar

8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 122-125) - 2018

Editor: ELSEVIER

https://doi.org/10.1016/j.procir.2018.08.246 View at source

Open Access

Statistical and numerical analysis of wear tool geometry in drilling CFRP

  • Feito Sanchez, Norberto
  • Muñoz Sanchez, Ana
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

20th International Conference on Composite Materials (ICCM20) (p. 1-10) - 2015

Numerical Prediction of Residual Stresses after Machining

  • Miguelez Garrido, Maria Henar
  • Zaera Polo, Ramon Eulalio
  • Muñoz Sanchez, Ana
  • Molinari, Alain Louis

Workshop \"Dynamic Fracture and Damage of Brittle and Ductile Materials and Its Industrial Applications\" - 2008

The Influence of Cutting Speed on the Residual Stresses after Machining

  • Miguelez Garrido, Maria Henar
  • Zaera Polo, Ramon Eulalio
  • Molinari, Alain Louis
  • Muñoz Sanchez, Ana

Workshop on Dynamic Fracture and Damage of Brittle and Ductile Materials and its Industrial Applications - 2008

Detección e identificación de fisuras en elementos mecánicos sencillos

  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Muñoz Abella, Maria Belen
  • Muñoz Sanchez, Ana
  • Loaiza Santoya, Gustavo Adolfo

XVII Congreso Nacional de Ingeniería Mecánica - 2008

Editor: ASOCIACION ESPAÑOLA DE INGENIERIA MECANICA

  • ISBN 0212-5072

ANN Approach for Modelling Orthogonal Cutting

  • Gonzalez Farias, Isabel Marina
  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana

36th Solid Mechanics Conference - 2008

This researcher has no working papers.

This researcher has no technical reports.

ROTORNEA-CM-UC3M - ESTUDIO Y DISEÑO DE HERRAMIENTAS DE CORTE PARA TORNEADO OBTENIDAS POR IMPRESIÓN 3D CON REFRIGERACIÓN INTERNA (ROTORNEA-CM-UC3M)

  • Diaz Alvarez, Antonio
  • Fernandez Torrijos, Maria
  • Muñoz Sanchez, Ana
  • Rodriguez Rodriguez, Francisco Javier
  • Ruiz-rivas Hernando, Ulpiano
  • Sanchez Gonzalez, Alberto
  • Diaz Alvarez, Jose
  • Gomez Garcia, David
  • Arevalo Fernandez, Carlos Martin
  • Calvo Lorente, Illan
... View more Collapse

Period: 01-01-2022 - 31-12-2023

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID

PID2020-118480RB-C22 - Análisis de defectos en laminados reforzados con fibras debidos a procesos de fabricación y efecto en el comportamiento a fatiga

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Diaz Alvarez, Jose

Period: 01-09-2021 - 31-08-2024

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

PDC2021-121368- C21 - DIGITDRILL - Digitalization of industrial drilling process

  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Antonio

Period: 01-12-2021 - 30-11-2023

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas

  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis

Period: 01-01-2018 - 30-09-2021

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Torralba Castello, Jose Manuel
  • Rabanal Jimenez, Maria Eugenia
  • Campos Gomez, Monica
  • Ruiz Navas, Elisa Maria
  • Bolzoni, Leandro
  • Tsipas, Sophia Alexandra
  • Torres Miranda, Eloy Alexander
... View more Collapse

Period: 01-01-2012 - 31-12-2013

Type of funding: Regional

Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)

DPI2011-25999 - Modelización del proceso de taladrado de materiales compuestos de fibra de carbono

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • De La Cruz Hernandez, Jesus Alberto
  • Soldani, Xavier
  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
... View more Collapse

Period: 01-01-2012 - 31-12-2014

Type of funding: National

Funding entity: MINISTERIO DE CIENCIA E INNOVACION

CCG10-UC3M/DPI-4585 - Desarrollo de un método no destructivo de detección e identificación de fisuras en ejes no rotatorios

  • Muñoz Abella, Maria Belen
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Cantero Guisandez, Jose Luis
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
  • Soldani, Xavier
  • Rubio Herrero, Patricia
... View more Collapse

Period: 01-01-2011 - 31-12-2011

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Loya Lorenzo, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Cheriguene, Rachid
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose
  • Soldani, Xavier
... View more Collapse

Period: 05-03-2009 - 20-05-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

CCG08-UC3M/DPI-4494 - CP08: Taladro en seco de la aleación Ti6Al4V: Análisis del daño térmico y del desgaste de herramientas mediante técnicas experimentales y simulación numérica

  • Cantero Guisandez, Jose Luis
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Muñoz Abella, Maria Belen
  • Miguelez Garrido, Maria Henar
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
  • Soldani, Xavier
... View more Collapse

Period: 01-01-2009 - 31-12-2009

Funding entity: COMUNIDAD DE MADRID-UC3M

DPI2008-06746 - Modelización numérica e integridad superficial en el torneado en seco de Inconel 718

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Soldani, Xavier

Period: 01-01-2009 - 31-03-2012

Type of funding: National

Funding entity: MINISTERIO DE CIENCIA E INNOVACION

Análisis experimental y numérico de las tensiones residuales debidas a mecanizado en aceros inoxidables austeníticos

  • Canteli Fernandez, Jose Antonio
  • Muñoz Sanchez, Ana
  • Miguelez Garrido, Maria Henar

Reading date: 09-12-2008

Reading institution: CAMPUS DE LEGANES

This researcher has no patents or software licenses.

Last data update: 11/27/24 2:10 AM