The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Alvaredo Olmos, Paula palvared@ing.uc3m.es

Ciencia e Ingeniería de Materiales e Ingeniería Química / Universidad Carlos III de Madrid

Publications

Open Access

The role of aging in the microstructure and mechanical properties of two multi-principal element alloys

  • Carbajales Hernandez, Rita
  • Sobrino Fernandez, Celia
  • Monclus Palazon, Miguel Alberto
  • Alvaredo Olmos, Paula

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (p. 148080-1-148080-14) - 4/2025

https://doi.org/10.1016/j.msea.2025.148080 View at source

  • EISSN 1873-4936
  • ISSN 0921-5093

Impact of C, Cr, and Si in Mn-Based Master Alloys on Microstructure and Mechanical Properties of Low-Alloyed Sintered Steels

  • Fernandez Perucho, Iu Aran
  • Córdova González, Laura
  • Jabbari Taleghani, Mohammad Ali
  • Alvaredo Olmos, Paula
  • Calero, Jose Antonio
  • Campos Gomez, Monica
  • Torralba Castello, Jose Manuel
... View more Collapse

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy (p. S1389-S1393) - 3/2025

https://doi.org/10.2497/jjspm.16f-t12-14 View at source

  • EISSN 1880-9014
  • ISSN 0532-8799

Improvement of Mechanical Properties of CoCrMo Alloys through Microstructure Engineering using Powder Metallurgy

  • Garcia De La Cruz, Lucia
  • Alvaredo Olmos, Paula
  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica

Funtai Oyobi Fummatsu Yakin/Journal of the Japan Society of Powder and Powder Metallurgy (p. S1221-S1225) - 3/2025

https://doi.org/10.2497/jjspm.16c-t11-07 View at source

  • EISSN 1880-9014
  • ISSN 0532-8799
Open Access

Material extrusion: A promising tool for processing CoCrMo alloy with excellent wear resistance for biomedical applications

  • Garcia De La Cruz, Lucia
  • Alvaredo Olmos, Paula
  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica

MATERIALS & DESIGN (p. 113089-1-113089-13) - 8/2024

https://doi.org/10.1016/j.matdes.2024.113089 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275
Open Access

Multi-principal element alloys for concentrating solar power based on molten salt

  • Carbajales Hernandez, Rita
  • Sobrino Fernandez, Celia
  • Alvaredo Olmos, Paula

SOLAR ENERGY MATERIALS AND SOLAR CELLS (p. 112861-1-112861-17) - 7/2024

https://doi.org/10.1016/j.solmat.2024.112861 View at source

  • EISSN 1879-3398
  • ISSN 0927-0248

Development of powders of Ti-Fe-Sn ultrafine eutectics for laser additive manufacturing

  • Pandey, Akshya K.
  • Alvaredo Olmos, Paula
  • Milenkovic, Srdjan
  • Sket, Federico

POWDER TECHNOLOGY (p. 1-12) - 5/2022

10.1016/j.powtec.2022.117416 View at source

  • EISSN 1873-328X
  • ISSN 0032-5910
Open Access

Novel high entropy alloys as binder in cermets: From design to sintering

  • Prieto Muñoz, Estela Maria
  • Vaz-romero Santero, Alvaro
  • Gonzalez Julian, J.
  • Alvaredo Olmos, Paula
  • Guo, S.

INTERNATIONAL JOURNAL OF REFRACTORY METALS & HARD MATERIALS (p. 1-10) - 9/2021

https://doi.org/10.1016/j.ijrmhm.2021.105592 View at source

  • EISSN 2213-3917
  • ISSN 0263-4368
Open Access

Design and production of a new feconicralcu high-entropy alloy: Influence of powder production method on sintering

  • Reverte Palomino, Eduardo
  • Calvo Dahlborg, Monique
  • Dahlborg, Ulf
  • Campos Gomez, Monica
  • Alvaredo Olmos, Paula
  • Martin Rodriguez, Pablo
  • Gordo Oderiz, Elena
  • Cornide Arce, Juan
... View more Collapse

Materials - MDPI (p. 4342-4359) - 8/2021

10.3390/ma14154342 View at source

  • ISSN 1996-1944
Open Access

Understanding the links between the composition-processing-properties in new formulations of heas sintered by sps

  • Alvaredo Olmos, Paula
  • Molina Aldareguia, Jon
  • Vaz-romero Santero, Alvaro
  • Prieto, Estela
  • Gonzalez Julian, Jesus
  • Monclus Palazon, Miguel Alberto

Metals (p. 1-15) - 1/6/2021

https://doi.org/10.3390/met11060888 View at source

  • ISSN 2075-4701
Open Access

Microstructure evolution in a fast and ultrafast sintered non-equiatomic Al/Cu HEA

  • Reverte Palomino, Eduardo
  • Cornide Arce, Juan
  • Lagos, Miguel A.
  • Campos Gomez, Monica
  • Alvaredo Olmos, Paula

Metals (p. 1-16) - 5/2021

10.3390/met11060848 View at source

  • ISSN 2075-4701

This researcher has no books.

Sintering of high entropy alloys: processing and properties. In: Encyclopedia of materials: metals and alloys

  • Alvaredo Olmos, Paula
  • Torralba Castello, Jose Manuel
  • Garcia Junceda Ameigenda, Andrea

Encyclopedia of materials: metals and alloys (p. 362-371) - 1/2022

Editor: ELSEVIER INC.

https://doi.org/10.1016/b978-0-12-819726-4.00106-x View at source

  • ISBN 978-0-12-819733-2

Processing of CoCrMo alloy samples with bimodal grain size distribution by Composite Extrusion Modelling

  • Garcia De La Cruz, Lucia
  • Alvaredo Olmos, Paula
  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica

GDR ALMA - 2023

Electrical resistance sintering: a promising tool to process CoCrMo alloy samples with exceptional mechanical properties

  • Garcia De La Cruz, Lucia
  • Lagos, Miguel A.
  • Alvaredo Olmos, Paula
  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica

EUROPM 2023. Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 - 2023

https://doi.org/10.59499/ep235764663 View at source

Composite Extrusion Modeling, a promising tool to manufacture a FeCrAlMoTiNi High Entropy Alloy

  • Garcia De La Cruz, Lucia
  • Jimeno Escobar, Patricia
  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica
  • Alvaredo Olmos, Paula

Alloys for Additive Manufacturing Symposium (AAMS 2023) (p. 131-132) - 2023

Open Access

Influence of the fabrication process on the corrosion behavior of two high entropy alloys in molten solar salt

  • Carbajales Hernandez, Rita
  • Lagos, Miguel A.
  • Sobrino Fernandez, Celia
  • Alvaredo Olmos, Paula

Euro Powder Metallurgy 2023 Congress and Exhibition, PM 2023 - 2023

Editor: EUROPEAN POWDER METALLURGY ASSOCIATION (EPMA)

https://doi.org/10.59499/ep235764980 View at source

Open Access

Design of alternative binders for hard materials

  • Nicolas Morillas, Maria De
  • Besharatloo, H.
  • Alvaredo Olmos, Paula
  • Roa, J.j.
  • Llanes, L.
  • Gordo Oderiz, Elena

11th International Conference on the Science of Hard Materials (ICSHM11) (p. 1-13) - 2020

Editor: ELSEVIER

https://doi.org/10.1016/j.ijrmhm.2019.105089 View at source

  • ISBN 0263-4368
Open Access

Influence of the processing route on the properties of Ti(C,N)-Fe15Ni cermets

  • Nicolas Morillas, Maria De
  • Besharatloo, H.
  • Roa, J.j.
  • Wheeler, J.
  • De Dios, M.
  • Alvaredo Olmos, Paula
  • Ferrari, B
  • Llanes, L.
  • Gordo Oderiz, Elena
... View more Collapse

11th International Conference on the Science of Hard Materials (ICSHM11) (p. 1-9) - 2/2019

https://doi.org/10.1016/j.ijrmhm.2019.105046 View at source

  • EISSN 2213-3917
  • ISSN 0263-4368
Open Access

Influence of the colloidal processing route on the mechanical properties of Ti(C,N)-based cermets

  • Dios Perez, Miguel De
  • Gonzalez, Zoilo
  • Ferrari Fernandez, Begoña
  • Kraleva, Irina
  • Raul, Bermejo
  • Alvaredo Olmos, Paula
  • Gordo Oderiz, Elena
... View more Collapse

19th Plansee Seminar 2017: International Conference on Refractory Metals and Hard Materials (p. 1-12) - 2017

Open Access

Aleaciones de alta entropía como matriz metálica alternativa en cermets

  • Prieto Muñoz, Estela Maria
  • Guo, S.
  • Gordo Oderiz, Elena
  • Alvaredo Olmos, Paula

XIV Congreso Nacional de Materiales - 2016

Open Access

Potencial de las técnicas coloidales para el procesamiento de polvos metálicos finos. Casos de estudio Fe-Si

  • Gordo Oderiz, Elena
  • Garcia Das Neves, Roberto
  • Escribano, J.
  • Alvaredo Olmos, Paula
  • Dios Perez, Miguel De
  • Sánchez-herencia, A.j.
  • Ferrari, Begoña
... View more Collapse

V Congreso Nacional de Pulvimetalurgia - 2015

Open Access

Interface study for the design of alternative matrixes in cermets

  • Alvaredo Olmos, Paula
  • Dios Perez, Miguel De
  • Ferrari Fernandez, Begoña
  • Gordo Oderiz, Elena

European Congress and Exhibition on Powder Metallurgy (Euro PM2015 Congress & Exhibition) - 2015

Editor: EUROPEAN POWDER METALLURGY ASSOCIATION (EPMA)

  • ISBN 978-1-899072-47-7

This researcher has no working papers.

This researcher has no technical reports.

PLEC2023-010190 - IRIDISCENTE - Inteligencia artificial para el diseño sostenible de aleaciones y procesos eficientes

  • Campos Gomez, Monica
  • Alvaredo Olmos, Paula
  • Garcia De La Cruz, Lucia

Period: 01-01-2024 - 31-12-2027

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Servicios de compactación de probetas de tracción y mezcla de polvos en Túrbula

  • Alvaredo Olmos, Paula

Period: 05-02-2024 - 05-03-2024

Type of funding: National

Funding entity: PMG POWERTRAIN R&D CENTER S.L.U.

PID2022-138332NB-C42 - Desarrollo de un acero sostenible resistente a alta temperatura mediante Composite Extrusion Modelling (CEM). - DESIREDCEM

  • Torralba Castello, Jose Manuel
  • Alvaredo Olmos, Paula
  • Campos Gomez, Monica

Period: 01-09-2023 - 31-08-2026

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

CPP2021-008682 - DAMAS - Diseño de Aleaciones Maestras para Aceros Sinterizados

  • Campos Gomez, Monica
  • Torralba Castello, Jose Manuel
  • Alvaredo Olmos, Paula

Period: 01-09-2022 - 31-08-2025

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

101072537 - TOPCSP - Towards Competitive, Reliable, Safe and Sustainable Concentrated Solar Power (CSP) Plants

  • Sobrino Fernandez, Celia
  • Acosta Iborra, Antonio
  • Santana Santana, Domingo Jose
  • Marugan Cruz, Carolina
  • Alvaredo Olmos, Paula
  • Sanchez Gonzalez, Alberto
  • Fernandez Torrijos, Maria
  • Vadillo Rubio, Andrea
  • Batuecas Fernandez, Esperanza
  • Carbajales Hernandez, Rita
  • Safari, Vahid
  • Palmero Gonzalez, Maria Asuncion
... View more Collapse

Period: 01-10-2022 - 30-09-2026

Type of funding: European

Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY

HEATEXTREME-CM-UC3M - Aleaciones de alta entropía para aplicaciones de alta temperatura y condiciones extremas

  • Sobrino Fernandez, Celia
  • Alvaredo Olmos, Paula
  • Jimenez Morales, Antonia
  • Santana Santana, Domingo Jose
  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica
  • Gonzalez Gomez, Pedro Angel
  • Carbajales Hernandez, Rita
... View more Collapse

Period: 01-01-2022 - 31-12-2023

Type of funding: Regional

Funding entity: CAM. CONSEJERÍA DE EDUCACIÓN E INVESTIGACION

TED2021-130255B-C31 - Diseño de aleaciones y producción de polvos

  • Torralba Castello, Jose Manuel
  • Alvaredo Olmos, Paula
  • Campos Gomez, Monica

Period: 01-12-2022 - 30-11-2024

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Pedido nº 4500100546 - Ensayos de caracterización de polvo metálico (análisis de tamaño de partícula y análisis de área superficial)

  • Alvaredo Olmos, Paula

Period: 01-11-2020 - 30-11-2020

Type of funding: National

Funding entity: PMG POLMETASA S.A.U.

Caracterización polvos metálicos

  • Alvaredo Olmos, Paula

Period: 04-11-2019 - 03-02-2020

Type of funding: Regional

Funding entity: PMG FÜSSEN GMBH

S2018/NMT-4411 - ADITIMAT-CM. Additive Manufacturing: from material to apllication.

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Rabanal Jimenez, Maria Eugenia
  • Tsipas, Sophia Alexandra
  • Alvaredo Olmos, Paula
  • Prieto Muñoz, Estela Maria
  • Nicolas Morillas, Maria De
  • Cifuentes Cuellar, Sandra Carolina
  • Alcantara Garcia, Andrea
  • Chirico Rodriguez, Caterina Del Carmen
  • Rodriguez Gonzalez, Paula
  • Toirac Chavez, Beatriz Dunia
  • Tabares Lorenzo, Eduardo
  • Reverte Palomino, Eduardo
  • Ferreiro Fernandez, Adalyz
  • Romero Villarreal, Carlos
... View more Collapse

Period: 01-01-2019 - 30-04-2023

Type of funding: Regional

Funding entity: CAM. CONSEJERÍA DE EDUCACIÓN E INVESTIGACION

Nuevos Materiales Tipo Cermet de Matriz Fe: Estudio de Composición, Microestructura y Propiedades

  • Alvaredo Olmos, Paula
  • Gordo Oderiz, Elena

Reading date: 29-11-2012

Development of New Cr-based Hardmetals by Liquid Phase Sintering and Spark Plasma Sintering

  • Alvaredo Olmos, Paula
  • Deng, Xiangxing
  • Garcia Junceda Ameigenda, Andrea

Reading date: 25-03-2019

Nuevas composiciones de aleaciones de alta entropía: diseño, fabricación y caracterización.

  • Alvaredo Olmos, Paula
  • Prieto Muñoz, Estela Maria

Reading date: 18-11-2021

This researcher has no patents or software licenses.

Last data update: 9/26/25 6:45 AM