Control del error de transmisión cuasi-estático mediante rebaje de punta en engranajes rectos de perfil de evolvente - JOSÉ I. PEDRERO; MIGUEL PLEGUEZUELOS; MIRYAM B. SÁNCHEZ (Revista iberoamericana de ingeniería mecánica, 2018)

Critical stress and load conditions for pitting calculations of involute spur and helical gear teeth - Pedrero, J.I.; Pleguezuelos, M.; Muñoz, M. (Mechanism and Machine Theory, 2011)

Contact stress calculation of undercut spur and helical gear teeth - Pedrero, J.I.; Pleguezuelos, M.; Munoz, M. (Mechanism and Machine Theory, 2011)

Simplified calculation method for the efficiency of involute spur gears - Pedrero, J.I.; Pleguezuelos, M.; Muñoz, M. (Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference 2009, DETC2009, 2010)

Control of transmission error of high contact ratio spur gears with symmetric profile modifications - Pleguezuelos, M.; Sánchez, M.B.; Pedrero, J.I. (Mechanism and Machine Theory, 2020)

Load sharing and quasi-static transmission error of non-standard tooth height spur gears - Pedrero, J.I.; Sánchez, M.B.; Pleguezuelos, M. (Mechanisms and Machine Science, 2020)

Analytical simulation of the tooth contact of spur gears - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanisms and Machine Science, 2020)

Load sharing model for high contact ratio spur gears with long profile modifications - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Forschung im Ingenieurwesen/Engineering Research, 2019)

Influence of profile modifications on meshing stiffness, load sharing, and trasnsmission error of involute spur gears - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Mechanism and Machine Theory, 2019)

Strength model for bending and pitting calculations of internal spur gears - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Mechanism and Machine Theory, 2019)

Load transfer among spur gear teeth with tip relief under non-nominal loading conditions - Pleguezuelos, M.; Sánchez, M.B.; Pedrero, J.I. (Mechanisms and Machine Science, 2019)

Approximate equations for the meshing stiffness and the load sharing ratio of spur gears including hertzian effects - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Mechanism and Machine Theory, 2017)

On the determination of the meshing stiffness and the load sharing of spur gears - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanisms and Machine Science, 2017)

Calculation of tooth bending strength and surface durability of internal spur gear drives - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Mechanism and Machine Theory, 2016)

Load sharing and contact stress calculation of high contact ratio internal spur gears - Pleguezuelos, M.; Pedrero, J.I.; Sánchez, M.B. (Mechanisms and Machine Science, 2015)

Tooth-root stress calculation of high transverse contact ratio spur and helical gears - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Meccanica, 2014)

Analytical expressions of the efficiency of standard and high contact ratio involute spur gears - Pleguezuelos, M.; Pedrero, J.I.; Sánchez, M.B. (Mathematical Problems in Engineering, 2013)

Load sharing model for non-standard involute spur gears - Pedrero, J.I.; Sánchez, M.B.; Pleguezuelos, M. (Mechanisms and Machine Science, 2013)

Enhanced model of load distribution along the line of contact for non-standard involute external gears - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Meccanica, 2013)

Contact stress calculation of high transverse contact ratio spur and helical gear teeth - Sánchez, M.B.; Pedrero, J.I.; Pleguezuelos, M. (Mechanism and Machine Theory, 2013)

Analitycal model of the efficiency of spur gears: Study of the influence of the design parameters - Pleguezuelos, M.; Pedrero, J.I.; Sánchez, M.B. (Proceedings of the ASME Design Engineering Technical Conference, 2011)

Load distribution model along the line of contact for involute external gears - Pedrero, J.I.; Pleguezuelos, M.; Artés, M.; Antona, J.A. (Mechanism and Machine Theory, 2010)

Load distribution model for involute internal gear sets - Pedrero, J.I.; Pleguezuelos, M.; Aguiriano, S. (2007 Proceedings of the ASME International Design Engineering Technical Conferences and Computers and Information in Engineering Conference, DETC2007, 2008)

Calculation of tooth bending strength and surface durability of high transverse contact ratio spur and helical gear drives - Pedrero, J.I.; Vallejo, I.I.; Pleguezuelos, M. (Journal of Mechanical Design, Transactions of the ASME, 2007)

Planetary gear sets power loss modeling: Application to wind turbines - Nutakor, C.; K?odowski, A.; Sopanen, J.; Mikkola, A.; Pedrero, J.I. (Tribology International, 2017)

Application of modified geometry of face gear drive - Zanzi, C.; Pedrero, J.I. (Computer Methods in Applied Mechanics and Engineering, 2005)

Determination of the effective path of contact of undercut involute gear teeth - Pedrero, J.I.; Artés, M.; García-Masiá, C. (Proceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science, 2004)

Approach for topological synthesis of hyperbolic gear drives - García-Masiá, C.; Pedrero, J.I. (Proceedings of the ASME Design Engineering Technical Conference, 2003)

Enhanced approach for application of longitudinal plunging in manufacturing of spur gear drives - Zanzi, C.; Pedrero, J.I. (Proceedings of the ASME Design Engineering Technical Conference, 2003)

New approach for the dimensional synthesis of gear basic surfaces - García-Masiá, C.; Pedrero, J.I. (Mechanism and Machine Theory, 2003)

Influence of undercut on the load capacity for involute teeth with small pressure angle - Pedrero, J.I.; Artés, M.; García-Masiá, C. (Proceedings of the ASME Design Engineering Technical Conference, 2003)

Approximate method for the determination of the bending strength geometry factor for external spur and helical gear teeth - Pedrero, J.I.; Fuentes, A.; Estrems, M. (Journal of Mechanical Design, Transactions of the ASME, 2000)

Determination of the ISO tooth form factor for involute spur and helical gears - Pedrero, J.I.; Rueda, A.; Fuentes, A. (Mechanism and Machine Theory, 1999)

Approximate equation for the addendum modification factors for tooth gears with balanced specific sliding - Pedrero, J.I.; Artés, M. (Mechanism and Machine Theory, 1996)

Determination of the addendum modification factors for gears with pre-established contact ratio - Pedrero, J.I.; Artés, M.; García-Prada, J.C. (Mechanism and Machine Theory, 1996)

Computerized graphic method for the analysis of gear design - Artes, M.; Pedrero, J.I. (Mechanism and Machine Theory, 1994)

Analytical model for meshing stiffness, load sharing, and transmission error for spur gears with profile modification under non-nominal load conditions - Pleguezuelos, M.; Sánchez, M.B.; Pedrero, J.I. (Applied Mathematical Modelling, 2021)

Minimum friction losses in wind turbine gearboxes - Pedrero, J.I.; Martínez-López, D.; Calvo-Irisarri, J.; Pleguezuelos, M.; Sánchez, M.B.; Fernández-Sisón, A. (Forschung im Ingenieurwesen/Engineering Research, 2022)

Influence of meshing stiffness on load distribution between planets of planetary gear drives - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanism and Machine Theory, 2022)

Influence of Wear on Load Sharing and Transmission Error of Spur Gears with Profile Modifications - Pleguezuelos, M.; Pedrero, J.I.; Sánchez, M.B.; Vicente, E. (Mechanisms and Machine Science, 2022)

Analytical Model for Spur Gears with Profile Modification: Simulation of the Meshing Stiffness, Load Sharing, and Transmission Error - Pedrero, J.I. (Mechanisms and Machine Science, 2022)

Diseño de una reductora para vehículo eléctrico con motor en rueda - Elena Vicente; Edgar Aneas; José Ignacio Pedrero (Revista DYNA, 2022)

Minimum Friction Losses in Planetary Stages of Wind Turbine Gearboxes - Pedrero, J.I.; Sanchez, M.B.; Guerra, D.; Calvo-Irisarri, J.; Pleguezuelos, M.; Fernandez-Sison, A. (Mathematical Problems in Engineering, 2022)

Critical stress and load conditions for bending calculations of involute spur and helical gears - Sánchez, M.B.; Pedrero, J.I.; Pleguezuelos, M. (International Journal of Fatigue, 2013)

Simplified calculation method for the efficiency of involute helical gears - Pleguezuelos, M.; Pedrero, J.I.; Sánchez, M. (Mechanisms and Machine Science, 2010)

Analytical model for meshing stiffness, load sharing, and transmission error for helical gears with profile modification - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanism and Machine Theory, 2023)

Simulación de la rigidez de engrane, error de transmisión y reparto de carga para engranajes helicoidales con dentadura rebajada - JOSÉ I. PEDRERO; MIGUEL PLEGUEZUELOS; MIRYAM B. SÁNCHEZ (Revista iberoamericana de ingeniería mecánica, 2022)

Modelo analítico de rendimiento de engranajes rectos convencionales - MIGUEL PLEGUEZUELOS; JOSÉ IGNACIO PEDRERO (Revista iberoamericana de ingeniería mecánica, 2009)

Analysis of the tip interference in low gear ratio internal spur gears with profile modification - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Forschung im Ingenieurwesen/Engineering Research, 2023)

A Distance Teaching Experience in Gear Design with Autodesk Inventor - Sánchez Sánchez, M.B.; Pleguezuelos González, M.; Pedrero Moya, J.I. (Mechanisms and Machine Science, 2023)

Influence of profile modification on the transmission error of spur gears under surface wear - Sánchez, M.B.; Pleguezuelos, M.; Pedrero, J.I. (Mechanism and Machine Theory, 2024)

Influencia de la profundidad de rebaje en la rigidez, reparto de carga y error de transmisión de engranajes rectos con desgaste - MIRYAM B. SÁNCHEZ; MIGUEL PLEGUEZUELOS; JOSÉ I. PEDRERO (Revista iberoamericana de ingeniería mecánica, 2023)

Theoretical analysis of transmission error in rack and pinion systems - Ulacia, Ibai; Sánchez, Miryam B.; Iñurritegui, Aurea; Arana, Aitor; Larrañaga, Jon; Pedrero, José I. (MATEC Web of Conferences, 2023)

Analysis of the Transmission Error and Mesh Stiffness of Load-Induced High Contact Ratio External Spur Gears - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanisms and Machine Science, 2024)

Analysis of the tooth-root stress of external spur gears with high effective contact ratio - Pedrero, J.I.; Sánchez, M.B.; Pleguezuelos, M.; Fuentes-Aznar, A. (Mechanism and Machine Theory, 2024)

Simulation and validation of the transmission error, meshing stiffness, and load sharing of planetary spur gear transmissions - Pedrero, J.I.; Sánchez-Espiga, J.; Sánchez, M.B.; Pleguezuelos, M.; Fernández-del-Rincón, A.; Viadero, F. (Mechanism and Machine Theory, 2024)

INFLUENCE OF TOOTH DEFLECTIONS AND LOCAL CONTACT DEFORMATIONS ON THE TOOTH-ROOT STRESS OF INTERNAL SPUR GEARS: DEFINITION OF A LOAD-SHARING COEFFICIENT FOR THE AGMA J-FACTOR - Pedrero, J.I.; Sánchez, M.B.; Fuentes-Aznar, A. (Proceedings of the ASME Design Engineering Technical Conference, 2024)

Efficiency of polymer gears - Nutakor, C.; Pedrero, J.I.; Sánchez, M.B. (Polymer Gears, 2024)

Influence of the Teeth Flexibility on the Load Sharing and Tooth Strength of Spur Gears - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanisms and Machine Science, 2025)

Analysis of the Teeth Constraints of Internal Spur Gears Considering Teeth Flexibility, Backlash Allowance, and Tip Relief - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (Mechanisms and Machine Science, 2025)

Analysis of the contact stress of beveloid gears with straight teeth and parallel axes - Sciarra,G.; Mottola,G.; Pleguezuelos,M.; Sánchez,M.B.; Carricato,M.; Pedrero,J.I. (Mechanism and Machine Theory, 2025)

Analysis of the tip interference in low gear ratio internal spur gears with profile modification - Pedrero, J.I.; Pleguezuelos, M.; Sánchez, M.B. (VDI Berichte, 2023)

Analytical model of meshing stiffness, load sharing, and transmission error for internal spur gears with profile modification - Pedrero, J.I.; Sánchez, M.B.; Pleguezuelos, M. (Mechanism and Machine Theory, 2024)

Influence of surface wear on the meshing stiffness and transmission error of internal spur gears with profile modification - Pedrero,J.I.; Pleguezuelos,M.; Sánchez,M.B. (Forschung im Ingenieurwesen/Engineering Research, 2025)

Influence of Planet Phasing on Quasi-Static Transmission Error in Planetary Spur Gears with Profile Modifications - Pedrero,J.I.; Pleguezuelos,M.; Hidalgo,A.F.; Sánchez,M.B. (Machines, 2026)