Studies of a self-cooled lead lithium blanket for HiPER reactor - Juárez, R.; Sanz, J.; Sánchez, C.; Zanzi, C.; Hernández, J.; Perlado, J.M. (Epj Web Of Conferences, 2013)

A simplified model of fires in road tunnels. Comparison with three-dimensional models and full-scale measurements - Migoya, E.; Crespo, A.; García, J.; Hernández, J. (Tunnelling And Underground Space Technology, 2009)

Anisotropy of turbulence in wind turbine wakes - Gómez-Elvira, R.; Crespo, A.; Migoya, E.; Manuel, F.; Hernández, J. (Journal Of Wind Engineering And Industrial Aerodynamics, 2005)

A one-dimensional model of a turbulent jet diffusion flame in an ambient atmospheric flow, derived from a three-dimensional model - Servert, J.; Crespo, A.; Hernandez, J. (Combustion Science And Technology, 1997)

Thermo-fluid dynamics and corrosion analysis of a self cooled lead lithium blanket for the HiPER reactor - Juárez, R.; Zanzi, C.; Hernández, J.; Sanz, J. (Nuclear Fusion, 2015)

VOFTools 5: An extension to non-convex geometries of calculation tools for volume of fluid methods - López, J.; Hernández, J.; Gómez, P.; Zanzi, C.; Zamora, R. (Computer Physics Communications, 2020)

VOFTools 3.2: Added VOF functionality to initialize the liquid volume fraction in general convex cells - López, J.; Hernández, J.; Gómez, P.; Zanzi, C.; Zamora, R. (Computer Physics Communications, 2019)

Non-convex analytical and geometrical tools for volume truncation, initialization and conservation enforcement in VOF methods - López, J.; Hernández, J.; Gómez, P.; Faura, F. (Journal of Computational Physics, 2019)

Analysis of heat and smoke propagation and oscillatory flow through ceiling vents in a large-scale compartment fire - Zanzi, C.; Gómez, P.; López, J.; Hernández, J. (Applied Sciences (Switzerland), 2019)

Simulation of high density ratio interfacial flows on cell vertex/edge-based staggered octree grids with second-order discretization at irregular nodes - Gómez, P.; Zanzi, C.; López, J.; Hernández, J. (Journal of Computational Physics, 2019)

VOFTools? A software package of calculation tools for volume of fluid methods using general convex grids - López, J.; Hernández, J.; Gómez, P.; Faura, F. (Computer Physics Communications, 2018)

A new volume conservation enforcement method for PLIC reconstruction in general convex grids - López, J.; Hernández, J.; Gómez, P.; Faura, F. (Journal of Computational Physics, 2016)

Application of non-convex analytic and geometric tools to a PLIC-VOF method - López, J.; Gómez, P.; Zanzi, C.; Faura, F.; Hernández, J. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2016)

Development of a Facility for Molten Metal Micro-droplets Generation. Application to Microfabrication by Deposition - Zamora, R.; Ortega, J.J.H.; López, J.; Faura, F.; Hernández, J. (Procedia Engineering, 2015)

A two-grid adaptive volume of fluid approach for dendritic solidification - López, J.; Gómez, P.; Hernández, J.; Faura, F. (Computers and Fluids, 2013)

An adaptive-grid projection method for high density ratio interfacial flows - Gómez, P.; Zanzi, C.; Palacios, J.; Hernández, J.; López, J. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2013)

Smoke and heat propagation modeling in transportation interchange stations using LES and RANS methods - Zanzi, C.; Mozas, A.; Her?andez, J.; Gar?ia-Hortelano, A.; Aldecoa, J. (ASME International Mechanical Engineering Congress and Exposition, Proceedings (IMECE), 2013)

Experimental study of splashing patterns and the splashing/deposition threshold in drop impacts onto dry smooth solid surfaces - Palacios, J.; Hernández, J.; Gómez, P.; Zanzi, C.; López, J. (Experimental Thermal and Fluid Science, 2013)

On the impact of viscous drops onto dry smooth surfaces - Palacios, J.; Hernández, J.; Gómez, P.; Zanzi, C.; López, J. (Experiments in Fluids, 2012)

On reducing interface curvature computation errors in the height function technique - López, J.; Hernández, J. (Journal of Computational Physics, 2010)

A volume of fluid approach for crystal growth simulation - López, J.; Gómez, P.; Hernández, J. (Journal of Computational Physics, 2010)

Simulation of dendritic growth using a VOF method - López, J.; Hernández, J.; Zanzi, C.; Faura, F.; Gómez, P. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009, 2009)

Direct numerical simulation of the first stages of a plunging breaker using a level set method - Gómez, P.; Zanzi, C.; Palacios, J.; López, J.; Hernández, J. (Proceedings of the ASME Fluids Engineering Division Summer Conference 2009, FEDSM2009, 2009)

An improved height function technique for computing interface curvature from volume fractions - López, J.; Zanzi, C.; Gómez, P.; Zamora, R.; Faura, F.; Hernández, J. (Computer Methods in Applied Mechanics and Engineering, 2009)

A new volume of fluid method in three dimensions - Part II: Piecewise-planar interface reconstruction with cubic-Bézier fit - López, J.; Zanzi, C.; Gómez, P.; Faura, F.; Hernández, J. (International Journal for Numerical Methods in Fluids, 2008)

A new volume of fluid method in three dimensions - Part I: Multidimensional advection method with face-matched flux polyhedra - Hernández, J.; López, J.; Gómez, P.; Zanzi, C.; Faura, F. (International Journal for Numerical Methods in Fluids, 2008)

Experimental investigation of porosity formation during the slow injection phase in high-pressure die-casting processes - Zamora, R.; Hernandez-Ortega, J.J.; Faura, F.; Lopez, J.; Hernandez, J. (Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2008)

Analytical and geometrical tools for 3D volume of fluid methods in general grids - López, J.; Hernández, J. (Journal of Computational Physics, 2008)

Experimental verification of numerical predictions for the optimum plunger speed in the slow phase of a high-pressure die casting machine - Zamora, R.; Faura, F.; López, J.; Hernández, J. (International Journal of Advanced Manufacturing Technology, 2007)

Influence of wave shape on the impact of shallow-water waves on vertical walls - Zanzi, C.; Gómez, P.; Palacios, J.; López, J.; Hernández, J. (2006 ASME Joint U.S.-European Fluids Engineering Summer Meeting, FEDSM 2006, 2006)

An improved PLIC-VOF method for tracking thin fluid structures in incompressible two-phase flows - López, J.; Hernández, J.; Gómez, P.; Faura, F. (Journal of Computational Physics, 2005)

On the reinitialization procedure in a narrow-band locally refined level set method for interfacial flows - Gómez, P.; Hernández, J.; López, J. (International Journal for Numerical Methods in Engineering, 2005)

Effects of variable properties and non-uniform heating on natural convection flows in vertical channels - Hernández, J.; Zamora, B. (International Journal of Heat and Mass Transfer, 2005)

A volume of fluid method based on multidimensional advection and spline interface reconstruction - López, J.; Hernández, J.; Gómez, P.; Faura, F. (Journal of Computational Physics, 2004)

On the critical plunger speed and three-dimensional effects in high-pressure die casting injection chambers - López, J.; Faura, F.; Hernández, J.; Gómez, P. (Journal of Manufacturing Science and Engineering, Transactions of the ASME, 2003)

Analysis of the flow in a high-pressure die casting injection chamber - Hernández, J.; López, J.; Faura, F.; Gómez, P. (Journal of Fluids Engineering, Transactions of the ASME, 2003)

Numerical simulation of breaking waves using a level set method - Gómez, P.; Hernández, J.; López, J.; Faura, F. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FED, 2002)

Influence of upstream conduction on the thermally optimum spacing of isothermal, natural convection-cooled vertical plate arrays - Zamora, B.; Hernández, J. (International Communications in Heat and Mass Transfer, 2001)

Influence of unsteady effects on air venting in pressure die casting - Hernández, J.; López, J.; Faura, F. (Journal of Fluids Engineering, Transactions of the ASME, 2001)

On the optimum plunger acceleration law in the slow shot phase of pressure die casting machines - Faura, F.; López, J.; Hernández, J. (International Journal of Machine Tools and Manufacture, 2001)

Shot sleeve wave dynamics in the slow phase of die casting injection - Lòpez, J.; Hernàndez, J.; Faura, F.; Trapaga, G. (Journal of Fluids Engineering, Transactions of the ASME, 2000)

Influence of variable property effects on natural convection flows in asymmetrically-heated vertical channels - Zamora, B.; Hernández, J. (International Communications in Heat and Mass Transfer, 1997)

Turbulence characteristics in wind-turbine wakes - Crespo, A.; Hernández, J. (Journal of Wind Engineering and Industrial Aerodynamics, 1996)

Numerical modeling of turbulent jet diffusion flames in the atmospheric surface layer - Hernández, J.; Crespo, A.; Duijm, N.J. (Combustion and Flame, 1995)

An analytical model for the microjet at the tip of a collapsing cavity - Crespo, A.; Manuel, F.; Hernandez, J. (Houille Blanche, 1992)

Dynamics of an elongated bubble during collapse - Crespo, A.; Castro, F.; Manuel, F.; Hernández, J. (Journal of Fluids Engineering, Transactions of the ASME, 1990)

Experimental validation of the UPM computer code to calculate wind turbine wakes and comparison with other models - Crespo, A.; Hernandez, J.; Fraga, E.; Andreu, C. (Journal of Wind Engineering and Industrial Aerodynamics, 1988)

On the boundary condition for the level set function in the numerical simulation of moving contact lines - Gómez, P.; Esteban, A.; Zanzi, C.; López, J.; Hernández, J. (American Society of Mechanical Engineers, Fluids Engineering Division (Publication) FEDSM, 2020)

Electromagnetic transient performance of optimally designed high surge impedance loading lines - Hernandez, J.; Segundo, J.; Gomez, P.; Borghei, M.; Ghassemi, M. (IEEE Power and Energy Society General Meeting, 2020)

A new isosurface extraction method on arbitrary grids - López, J.; Esteban, A.; Hernández, J.; Gómez, P.; Zamora, R.; Zanzi, C.; Faura, F. (Journal of Computational Physics, 2021)

The importance of small airway dysfunction in asthma: The gema-forum iii task force - Plaza, V.; Trigueros, J.A.; Cisneros, C.; Domínguez-Ortega, J.; Cimbollek, S.; Fernández, S.; Hernández, J.; López, J.D.; Ojanguren, I.; Padilla, A.; Pallarés, A.; Sánchez-Toril, F.J.; et al. (Journal of Investigational Allergology and Clinical Immunology, 2021)

gVOF: An open-source package for unsplit geometric volume of fluid methods on arbitrary grids - López, J.; Hernández, J. (Computer Physics Communications, 2022)

Volume-conservative modeling of structures manufactured by molten drop-on-drop deposition - Zamora, R.; Faura, F.; Hernández, J.; López, J. (Materials and Design, 2022)

A comparative study of two open-source state-of-the-art geometric VOF methods - Esteban, A.; López, J.; Gómez, P.; Zanzi, C.; Roenby, J.; Hernández, J. (Computers and Fluids, 2023)

A volume-preserving model for predicting the geometry of traces produced by drop-on-demand 3D printing - Zamora, R.; Faura, F.; López, J.; Hernández, J. (Materials & Design, 2025)

A contact line force model for the simulation of drop impacts on solid surfaces using volume of fluid methods - Esteban, A.; Gómez, P.; Zanzi, C.; López, J.; Bussmann, M.; Hernández, J. (Computers and Fluids, 2023)

Evaluation of Audiovisual Guides for Laboratory Classes in Hydraulic Machinery Courses of Distance Learning Engineering Programs - Zanzi, C.; Gómez, P.; Berlanga, F.; Hernández, J. (Mechanisms and Machine Science, 2023)

On polytope intersection by half-spaces and hyperplanes for unsplit geometric volume of fluid methods on arbitrary grids - López, J.; Hernández, J. (Computer Physics Communications, 2024)

A numerical model for the simulation of complex planar Newtonian interfaces - Esteban, A.; Hernández, J.; Tajuelo, J.; Rubio, M.Á. (Applied Mathematical Modelling, 2025)

iRheoFoam: A package for simulating complex planar interfaces - Esteban, A.; Hernández, J.; Tajuelo, J.; Rubio, M.Á. (SoftwareX, 2025)