Influence of tool cooling on thrust forces in tapping operations of reinforced polyamide - Domingo, R.; Calvo, R.; Marín, M.M.; de Agustina, B. (Book Of Abstracts Manufacturing Engineering Society International Conference 2017 (Mesic2017) . Transforming Knowledge Towards Manufacturing 4.0 ares Gómez, J. Enrique / Salgueiro Gómez, Jorge / Fernández López, Fco. Javier / Pelaez Lourido, Gustavo, 2017)

Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part II-Experimental Implementation - Calvo, R.; D?Amato, R.; Gómez, E.; Domingo, R. (Sensors, 2016)

Integration of Error Compensation of Coordinate Measuring Machines into Feature Measurement: Part I-Model Development - Calvo, R.; D'Amato, R.; Gómez, E.; Domingo, R. (Sensors, 2016)

A comparative experimental study of an alternative CMM error model under least-squares and minimum zone fittings for industrial measuring - Calvo, R.; D'Amato, R.; Gómez, E.; Domingo, R. (Procedia Engineering, 2015)

Delamination analysis of polymeric materials during the drilling process - Domingo, R.; Marín, M.; De Agustina, B.; Calvo, R. (Procedia Engineering, 2015)

Vectorial method of minimum zone tolerance for flatness, straightness, and their uncertainty estimation - Calvo, R.; Gómez, E.; Domingo, R. (International Journal Of Precision Engineering And Manufacturing, 2014)

Circle fitting from the polarity transformation regression - Calvo, R.; Gómez, E.; Domingo, R. (Precision Engineering-Journal Of The International Societies For Precision Engineering And Nanotechnology, 2013)

Redesigning an assembly line through lean manufacturing tools - Álvarez, R.; Calvo, R.; Peña, M.M.; Domingo, R. (International Journal Of Advanced Manufacturing Technology, 2009)

Systemic criterion of sustainability in agile manufacturing - Calvo, R.; Domingo, R.; Sebastin, M.A. (International Journal Of Production Research, 2008)

Materials flow improvement in a lean assembly line: a case study - Domingo, R.; Alvarez, R.; Peña, M.M.; Calvo, R. (Assembly Automation, 2007)

Operational flexibility quantification in a make-to-order assembly system - Calvo, R.; Domingo, R.; Sebastián, M.A. (Int J Flex Manuf Sys, 2007)

Evaluation of Thrust Forces in Dry Drilling of UNS A97050 Alloy - Domingo, R.; Arenas, J.M.; Marcos, M.; Sebastián, M.A. (Advanced Materials Research, 2010)

Energetic analysis of the drawing process by upper-bound techniques - Rubio, E.M.; Domingo, R.; Arenas, J.M.; González, C. (Journal Of Materials Processing Technology, 2004)

Optimization of Cold Formed Steel Cross Section Profile for Timber Upgrading - González-Bravo, C.; Claver, J.; Alvarez, R.; Domingo, R. (Aip Conference Proceedings, 2012)

Improvement of the Mechanical Properties of Formed Steel Cross Section Profile for Timber Upgrading - González-Bravo, C.; Claver, J.; Alvarez, R.; Domingo, R. (Advanced Materials Research, 2012)

Complexity in manufacturing processes and systems - Domingo, R.; Blanco-Fernández, J.; Garciá-Alcaraz, J.L.; Rivera, L. (Complexity, 2018)

A global solution for plastic deformation process by means of a sustainable manufacturing system - Ramírez, J.; Packianather, M.S.; Domingo, R.; Sebastián, M.A. (2010 5th International Conference on System of Systems Engineering, SoSE 2010, 2010)

Deep drawing tool for e-learning: A didactic approach for manufacturing engineering education - Ramírez, F.J.; Domingo, R.; Sebastián, M.A. (2010 IEEE Education Engineering Conference, EDUCON 2010, 2010)

An optimization algorithm for improving combined multi-stage deep-drawing and ironing processes of axisymmetric components. Analysis and experimentation - Ramírez, F.J.; Domingo, R.; Sebastián, M.A. (Proceedings of the 36th International MATADOR Conference, 2010)

The development of competencies in manufacturing engineering by means of a deep-drawing tool - Ramírez, F.J.; Domingo, R.; Sebastián, M.A.; Packianather, M.S. (Journal of Intelligent Manufacturing, 2013)

Study of the roughness of carbon fiber-reinforced composite plates in peripheral cryogenic milling - Domingo, R.; Marin, M.M.; De Agustina, B. (AIP Conference Proceedings, 2019)

Development of Trajectories Through the Kalman Algorithm and Application to an Industrial Robot in the Automotive Industry - Garriz, C.; Domingo, R. (IEEE Access, 2019)

A multi-response optimization of thrust forces, torques, and the power of tapping operations by cooling air in reinforced and unreinforced polyamide PA66 - Domingo, R.; de Agustina, B.; Marín, M.M. (Sustainability (Switzerland), 2018)

CO2 emissions reduction and energy efficiency improvements in paper making drying process control by sensors - Calvo, L.M.; Domingo, R. (Sustainability (Switzerland), 2017)

Simulation, through discrete events, of industrial processes in productive environments - Gárriz, C.; Domingo, R. (Procedia Manufacturing, 2017)

An Approach to Integrating Tactical Decision-Making in Industrial Maintenance Balance Scorecards Using Principal Components Analysis and Machine Learning - Rodríguez-Padial, N.; Marín, M.; Domingo, R. (Complexity, 2017)

An approach to evaluate tactical decision-making in industrial maintenance - Rodríguez-Padial, N.; Marín, M.; Domingo, R. (Procedia Manufacturing, 2017)

Learning activities through academic papers focused on forming processes - Domingo, R.; Marín, M.M.; de Agustina, B. (Materials Science Forum, 2017)

Latest clean manufacturing trends applied to a world class manufacturing management for improving logistics and environmental performance - Alonso, L.; Rubio, E.M.; de Agustina, B.; Domingo, R. (Procedia Manufacturing, 2017)

Design and implementation of active learning activities focused on simulations of drilling in composites - Domingo, R. (Materials Science Forum, 2016)

Influence of process operating parameters on CO2 emissions in continuous industrial plants - Calvo, L.M.; Domingo, R. (Journal of Cleaner Production, 2015)

Overall environmental equipment effectiveness as a metric of a lean and green manufacturing system - Domingo, R.; Aguado, S. (Sustainability (Switzerland), 2015)

Strategic Framework to Maintenance Decision Support Systems - Rodríguez-Padial, N.; Marín, M.; Domingo, R. (Procedia Engineering, 2015)

Application of a Virtual and Ergonomic Framework for an Industrial Light Vehicle Concept Assembly Process: A Case Report - Sánchez, A.; Garcia, M.; Domingo, R.; Camacho, A.M.; Sebastián, M. (Procedia Engineering, 2015)

Using CO2 emissions as a maintenance ratio in manufacturing processes - Calvo, L.M.; Domingo, R. (Key Engineering Materials, 2014)

Analysis of energy consumption in the dry drilling of PEEK GF30 - Domingo, R.; García, M.; Gómez, M.R. (Materials Science Forum, 2014)

A cost-benefit ergonomics methodology applied to service industry with digital human modelling - García, M.; Sánchez, A.; Domingo, R.; Sebastián, M.A. (European Journal of Industrial Engineering, 2014)

A sustainable evaluation of drilling parameters for PEEK-GF30 - Domingo, R.; García, M.; Sánchez, A.; Gómez, R. (Materials, 2013)

Novel Ergonomic Postural Assessment Method (NERPA) Using Product-Process Computer Aided Engineering for Ergonomic Workplace Design - Sanchez-Lite, A.; Garcia, M.; Domingo, R.; Angel Sebastian, M. (PLoS ONE, 2013)

Assessing the acquisition of generic skills in open postgraduate studies in advanced manufacturing engineering - Domingo, R.; Claver, J.; Álvarez, R. (Materials Science Forum, 2013)

Online activities development to improve the understanding of the processes for sheet cold forming - Álvarez, R.; Claver, J.; Lobo, D.; Domingo, R. (Materials Science Forum, 2013)

Modular procedure to improve the application of the upper-bound theorem in forging - Martín, F.; Camacho, A.M.; Domingo, R.; Sevilla, L. (Materials and Manufacturing Processes, 2013)

A first approach to the use of CO2 emissions as a maintenance indicator in industrial plants - Calvo, L.M.; Domingo, R. (Procedia Engineering, 2013)

Determination of energy during the dry drilling of PEEK GF30 considering the effect of torque - Domingo, R.; García, M.; Gómez, M.R. (Procedia Engineering, 2013)

Model of efficient and sustainable improvements in a lean production system through processes of environmental innovation - Aguado, S.; Alvarez, R.; Domingo, R. (Journal of Cleaner Production, 2013)

Value chain based framework for assessing the Ferdows' strategic plant role: An empirical study - Mediavilla, M.; Errasti, A.; Domingo, R.; Martínez, S. (IFIP Advances in Information and Communication Technology, 2012)

The formation of saw toothed chip in a titanium alloy: Influence of constitutive models - Alvarez, R.; Domingo, R.; Sebastian, M.A. (Strojniski Vestnik/Journal of Mechanical Engineering, 2011)

A numerical approach and comparison of cutting forces and chip morphology in orthogonal cutting of light alloys - Álvarez, R.; Domingo, R.; Sebastián, M.A. (AIP Conference Proceedings, 2010)

Investigation of Ti6Al4V orthogonal cutting numerical simulations using different material models - Álvarez, R.; Domingo, R.; Sebastián, M.A. (AIP Conference Proceedings, 2010)

Application of an aided system to multi-step deep drawing process in the brass pieces manufacturing - Javier Ramírez, F.; Domingo, R. (AIP Conference Proceedings, 2009)

Analysis of plate drawing processes by the upper bound method using theoretical work-hardening materials - Rubio, E.M.; Marín, M.; Domingo, R.; Sebastián, M.A. (International Journal of Advanced Manufacturing Technology, 2009)

Mechanical solutions for hot forward extrusion under plane strain conditions by upper bound method - Domingo, R.; Camacho, A.M.; Rubio, E.M.; Sebastián, M.A. (Key Engineering Materials, 2008)

Analysis of the influence of back-pull in drawing process by the finite element method - Camacho, A.M.; Domingo, R.; Rubio, E.; González, C. (Journal of Materials Processing Technology, 2005)

Study of drilling process by cooling compressed air in reinforced polyether-ether-ketone - Domingo, R.; de Agustina, B.; Marín, M.M. (Materials, 2020)

Opportunities and barriers of hydrogen?electric hybrid powertrain vans: A systematic literature review - Castillo, O.; Álvarez, R.; Domingo, R. (Processes, 2020)

EMG characterization and processing in production engineering - del Olmo, M.; Domingo, R. (Materials, 2020)

Quantifying the impact of production globalization through application of the life cycle inventory methodology and its influence on decision making in industry - Prado-Galiñanes, H.J.; Domingo, R. (Processes, 2021)

Influence of maintenance actions in the drying stage of a paper mill on CO2 emissions - Calvo, L.M.; Domingo, R. (Processes, 2021)

Assisted-Driven Design of Customized Maintenance Plans for Industrial Plants - Rodríguez-Padial, N.; Marín, M.M.; Domingo, R. (Applied Sciences (Switzerland), 2022)

Trajectory Optimization in Terms of Energy and Performance of an Industrial Robot in the Manufacturing Industry - Garriz, C.; Domingo, R. (Sensors, 2022)

Study of Drilled Holes after a Cryogenic Machining in Glass Fiber-Reinforced Composites - Domingo, R.; de Agustina, B.; Ayllón, J. (Applied Sciences (Switzerland), 2022)

Towards a Digital Twin Warehouse through the Optimization of Internal Transport - Félix-Cigalat, J.S.; Domingo, R. (Applied Sciences (Switzerland), 2023)

Software Alternatives to Design Learning Activities for Lean Six Sigma in e-learning - Rodríguez-Martín, M.; Rodríguez-Gonzálvez, P.; del Rosario Domingo, M. (Lecture Notes in Educational Technology, 2023)

Prospective in additive manufacturing based on r-meta-analysis and bibliometric study - Rodríguez-Martin, M.; Domingo, R.; Ribeiro, J. (Advances in Science and Technology, 2023)

Improvement of Industrial Maintenance Plans through Assistance-Driven Reliability-Centered Maintenance and Case-Based Reasoning Design - Rodríguez-Padial, N.; Marín, M.M.; Domingo, R. (Electronics (Switzerland), 2024)

Mapping and prospective of additive manufacturing in the context of Industry 4.0 and 5.0 - Rodríguez-Martín, M.; Domingo, R.; Ribeiro, J. (Rapid Prototyping Journal, 2024)

An Analysis of the Circularity of the Holes in the Drilling of Basalt Fiber Reinforced Laminates - Ayllón, J.; Claver, J.; de Agustina, B.; Domingo, R. (Key Engineering Materials, 2023)

Preassembly Cryogenic Drilling in Carbon Fiber Sandwich Sheets with Inner Foam Core - Domingo, R.; Marín, M.M.; Rodríguez-Padial, N.; Álvarez-Fernández, R. (Applied Sciences (Switzerland), 2025)

A decision-making framework for selecting industry 4.0 technologies to build supply chain resilience - Vives-Martínez,J.M.; Marín,M.M.; Domingo,R. (International Journal of Advanced Manufacturing Technology, 2025)

Intermittent demand forecasting of aerospace rotable parts. A framework for unpredictable flight patterns - Olmo,M.D.; Domingo,R. (Computers and Industrial Engineering, 2026)

Analysis of the Quality of Holes Drilled at Low Temperatures in Carbon Fiber Plates with a Foamed Polyvinyl Chloride Core - Domingo,R.; Rodríguez-Padial,N.; García-Domínguez,A.; Marín,M.M. (Applied Sciences (Switzerland), 2026)