Los datos mostrados de la Universidad Carlos III de Madrid son parciales, pues con ellos se pretende responder a 2 preguntas:
- ¿Quién investiga un tema concreto?
- ¿Qué investiga un/a investigador/a, grupo o departamento específico?
Por esta razón sólo recoge investigadores/as en activo.
Además, sólo se recogen los resultados de investigación siguiendo estos límites:
- Proyectos de investigación desde 2006.
- Publicaciones, Tesis doctorales, Patentes y Software desde 2008.
Santiuste Romero, Carlos csantius@ing.uc3m.es
Actividades
- Artículos 41
- Libros 1
- Capítulos de libro 4
- Congresos 39
- Documentos de trabajo 0
- Informes técnicos 0
- Proyectos de investigación 27
- Tesis dirigidas 4
- Patentes o licencias de software 0
Nonlinear static and dynamic responses of graphene platelets reinforced composite beam with dielectric permittivity
- Wang, Yu
- Feng, Chuang
- Wang, Xinwei
- Zao, Zhan
- Santiuste Romero, Carlos
- Dong, Youheng
- Yang, Jie
APPLIED MATHEMATICAL MODELLING (p. 298-315) - 7/2019
https://doi.org/10.1016/j.apm.2019.02.025 Ver en origen
- ISSN 0307-904X
Buckling and postbuckling of dielectric composite beam reinforced with Graphene Platelets (GPLs)
- Wang, Y.
- Feng, C.
- Santiuste Romero, Carlos
- Zhao, Z.
- Yang, J.
Aerospace Science and Technology (p. 208-218) - 8/2019
https://doi.org/10.1016/j.ast.2019.05.008 Ver en origen
- ISSN 1270-9638
Modelling impact behaviour of all-cellulose composite plates
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 139-143) - 4/2015
https://doi.org/10.1016/j.compstruct.2014.11.072 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Modelling of Composite Sandwich Structures with Honeycomb Core Subjected to High-Velocity Impact
- Buitrago Perez, Brenda
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
COMPOSITE STRUCTURES (p. 2090-2096) - 8/2010
https://doi.org/10.1016/j.compstruct.2009.10.013 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Manufacture of compression moulded PLA based biocomposites: A parametric study
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 995-1000) - 11/2015
https://doi.org/10.1016/j.compstruct.2015.06.066 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Residual Flexural Strength After Low-Velocity Impact in Glass/Polyester Composite Beams
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 25-30) - 1/2010
https://doi.org/10.1016/j.compstruct.2009.06.007 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Numerical modelling of foam-cored sandwich plates under high-velocity impact
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
COMPOSITE STRUCTURES (p. 2392-2399) - 8/2011
https://doi.org/10.1016/j.compstruct.2011.03.028 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 700-709) - 2/2019
https://doi.org/10.1016/j.compstruct.2018.11.018 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
FEM Analysis of Dynamic Flexural Behaviour of Composite Sandwich Beams with Foam Core
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
COMPOSITE STRUCTURES (p. 2285-2291) - 1/2010
https://doi.org/10.1016/j.compstruct.2009.07.018 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Machining FEM Model of Long Fiber Composites for Aeronautical Component
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
- Soldani, Xavier
COMPOSITE STRUCTURES (p. 691-698) - 2/2010
https://doi.org/10.1016/j.compstruct.2009.09.021 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures
- Garcia Castillo, Shirley Kalamis
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Navarro Ugena, Carlos
- Barbero Pozuelo, Enrique
Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013
Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH
- ISBN 978-94-007-5328-0
Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
Fiber-Reinforced Composites (p. 497-526) - 10/2012
Editor: NOVA SCIENCE PUBLISHERS INC
- ISBN 978-1-61470-433-1
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 Ver en origen
- ISBN 9783110292251
Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
Wiley Encyclopedia of Composites (p. 1-14) - 7/2012
Editor: WILEY
https://doi.org/10.1002/9781118097298.weoc200 Ver en origen
- ISBN 978-1-11-809729-8
On the Modeling of Ductile Composite under Low-Velocity Impact
- Moure Cuadrado, Marta Maria
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures - 2012
Impact and Compression after Impact (CAI) behavior of PLA/Flax biocomposites
- Rubio Lopez, Angel
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
2nd International Conference on Mechanics of Composites (MECHCOMP2 2016) (p. 111-111) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978-88-7488-963-1
Modeling of viscoelastoplastic behavior of Flax/PLA biodegradable composites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
2nd International Conference on Mechanics of Composites (MECHCOMP2 2016) (p. 111-111) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978-88-7488-963-1
Numerical Modeling of Post-Processing of Composite Materials
- Soldani, Xavier
- Santiuste Romero, Carlos
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
2nd Special Symposium on New Frontiers in Materials Processing Training and Learning (p. 93-98) - 7/2011
https://doi.org/10.4028/www.scientific.net/msf.692.93 Ver en origen
- EISSN 1662-9752
- ISBN 978-3-03785-206-4
- ISSN 0255-5476
Analysis of multilayered combinations of UHMWPE
- Peinado, Jairo
- Wang, Liujiao
- Olmedo, Alvaro
- Santiuste Romero, Carlos
2nd World Conference on Advanced Materials for Defense - 2020
Design of a learning method based on Flipped-Classroom methodologies using SPOCs in an engineering course
- Santiuste Romero, Carlos
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Varas Doval, David
- Ruiz Navas, Elisa Maria
- Segovia Vargas, Daniel
45th SEFI Annual Conference 2017: Education Excellence for Sustainable Development (p. 407-413) - 2017
Editor: SEFI
- ISBN 9789899887572
Three-dimensional modeling of machining processes
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Diaz Garcia, Jose Alberto
- Soldani, Xavier
- Cantero Guisandez, Jose Luis
4th Manufacturing Engineering Society International Conference (MESIC 2011) = 4º Congreso Internacional de la Sociedad de Ingeniería de Fabricación (p. 255-260) - 2011
Editor: Trans Tech Publications Ltd.
https://doi.org/10.4028/www.scientific.net/amr.498.255 Ver en origen
- ISBN 1022-6680
2D and 3D Approaches to Simulation of Metal and Composite Cutting
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
- Marin Calvo, Nacari Del Carmen
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
4th Manufacturing Engineering Society International Conference (MESIC 2011) (p. 651-659) - 2012
Editor: AMER INST PHYSICS
- ISBN 978-84-615-6973-1
Experimental and numerical ballistic behaviour of stainless-steel and fiber glass FML plates
- Loya Lorenzo, Jose Antonio
- Santiuste Romero, Carlos
- Valverde Marcos, Borja
- Rodriguez Millan, Marcos
- Drozdziel-jurkiewicz, Magda
- Podolak, Piotr
- Jakubczak, Patryk
AuxDefense 2022: 3rd World Conference on Advanced Materials for Defense (p. 181-182) - 2022
Editor: SCIENCENTRIS, UNIPESSOAL, LDA
- ISBN 978-989-54808-7-6
A study of induced damage during drilling on natural fibre based biocomposites
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
CACMS 2015: International Conference on Advances in Composite Materials and Structures - 2015
Este/a investigador/a no tiene documentos de trabajo.
Este/a investigador/a no tiene informes técnicos.
TRA2007-66555 - Aplicación de modelos de daño progresivo al análisis estructural de elementos fabricados con materiales compuestos de tipo laminado.
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Sanchez Merino, Angel Luis
- Buitrago Perez, Brenda
Ejecución: 01-10-2007 - 31-12-2010
Tipo: Nacional
Financiado por: MINISTERIO DE EDUCACION Y CIENCIA SEC. DE ESTADO DE UNIVERSIDADES E INVEST.
UC3M-IME-05-026 - CP05-AVANCE EN EL ESTUDIO DE CRITERIOS DE ROTURA EN CONDICIONES DINÁMICAS DE MATERIALES COMPUESTOS DE USO ESTRUCTURAL
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
Ejecución: 01-01-2006 - 31-01-2007
Financiado por: COMUNIDAD DE MADRID-UC3M
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Ejecución: 16-06-2022 - 15-06-2023
Tipo: Regional
Financiado por: COMERCIAL HERNANDO MORENO, COHEMO S.L.
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Ejecución: 18-06-2020 - 17-06-2023
Tipo: Regional
Financiado por: FABRICA ESPAÑOLA DE CONFECCIONES
DPI2010-15123 - ANALISIS DE COMPORTAMIENTOS LAMINADOS CARBONO/EPOXI SOMETIDOS A IMPACTOS DE FRAGMENTOS DE HIELO
- Lopez Puente, Jorge
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Ejecución: 01-01-2011 - 31-12-2013
Tipo: Nacional
Financiado por: MINISTERIO DE CIENCIA E INNOVACION
PEDIDO NÚM. A8221464G - Simulation capabilities for Impact predictive models and blade impact damage characterization.
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Ejecución: 07-07-2011 - 30-06-2012
Tipo: Regional
Financiado por: AIRBUS OPERATIONS, S.L.
DPI2013-43994-R - Análisis experimental y numérico del comportamiento mecánico en condiciones dinámicas de elementos estructurales fabricados con materiales compuestos biodegradables
- Santiuste Romero, Carlos
- Soldani, Xavier
Ejecución: 01-01-2014 - 31-12-2017
Tipo: Nacional
Financiado por: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
DPI2017-88166-R - Diseño avanzado de protecciones personales y su interacción con el cuerpo humano
- Rodriguez Millan, Marcos
- Loya Lorenzo, Jose Antonio
- Santiuste Romero, Carlos
- Aranda Ruiz, Josue
- Marco Esteban, Miguel
Ejecución: 01-01-2018 - 31-12-2020
Tipo: Nacional
Financiado por: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
JANO. Subproyecto: Probabilistic Desing
- Sanchez Sanchez, Angel
- Cuesta Ruiz, Jose Antonio
- Santiuste Romero, Carlos
Ejecución: 01-01-2020 - 01-03-2022
Tipo: Nacional
Financiado por: GAMESA INNOVATION AND TECHNOLOGY SLU
CCG06-UC3M/DPI-0771 - CP06: ANÁLISIS DEL PANDEO DE ELEMENTOS ESTRUCTURALES DAÑADOS POR IMPACTOS DE BAJA VELOCIDAD
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
Ejecución: 01-01-2007 - 29-02-2008
Financiado por: COMUNIDAD DE MADRID-UC3M
Análisis experimental y numérico del taladrado de<br/> materiales compuestos .
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
Fecha de defensa: 24-11-2017
Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.
- Barbero Pozuelo, Enrique
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
Fecha de defensa: 23-10-2015
Defensa realizada en: CAMPUS DE LEGANES
Manufacturing, Characterization and Modelling of Biodegradable Composite Materials
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
Fecha de defensa: 07-10-2016
Defensa realizada en: CAMPUS DE LEGANES
Este/a investigador/a no tiene patentes o licencias de software.
Grupos de investigación
Perfiles de investigador/a
-
ORCID
-
Scopus Author ID
-
Dialnet id