Los datos mostrados de la Universidad Carlos III de Madrid son parciales, pues con ellos se pretende responder a 2 preguntas:

  • ¿Quién investiga un tema concreto?
  • ¿Qué investiga un/a investigador/a, grupo o departamento específico?

Por esta razón sólo recoge investigadores/as en activo.

Además, sólo se recogen los resultados de investigación siguiendo estos límites:

  • Proyectos de investigación desde 2006.
  • Publicaciones, Tesis doctorales, Patentes y Software desde 2008.

Santiuste Romero, Carlos csantius@ing.uc3m.es

Actividades

Dynamic Analysis of Bending-Torsion Coupled Composite Beams Using the Flexibility Influence Function Method

  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (p. 1611-1618) - 12/2008

https://doi.org/10.1016/j.ijmecsci.2008.10.005 Ver en origen

  • EISSN 1879-2162
  • ISSN 0020-7403

Residual Flexural Strength After Low-Velocity Impact in Glass/Polyester Composite Beams

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos

COMPOSITE STRUCTURES (p. 25-30) - 1/2010

https://doi.org/10.1016/j.compstruct.2009.06.007 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

FEM Analysis of Dynamic Flexural Behaviour of Composite Sandwich Beams with Foam Core

  • Ivañez Del Pozo, Ines
  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia

COMPOSITE STRUCTURES (p. 2285-2291) - 1/2010

https://doi.org/10.1016/j.compstruct.2009.07.018 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

Machining FEM Model of Long Fiber Composites for Aeronautical Component

  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar
  • Soldani, Xavier

COMPOSITE STRUCTURES (p. 691-698) - 2/2010

https://doi.org/10.1016/j.compstruct.2009.09.021 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

A Comparison of Progressive-Failure Criteria in the Prediction of the Dynamic Bending Failure of Composite Laminated Beams

  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

COMPOSITE STRUCTURES (p. 2406-2414) - 3/2010

https://doi.org/10.1016/j.compstruct.2010.03.004 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

Modelling of Composite Sandwich Structures with Honeycomb Core Subjected to High-Velocity Impact

  • Buitrago Perez, Brenda
  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Navarro Ugena, Carlos

COMPOSITE STRUCTURES (p. 2090-2096) - 8/2010

https://doi.org/10.1016/j.compstruct.2009.10.013 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

Computational analysis of temperature effect in composite bolted joints for aeronautical applications

  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique
  • Miguelez Garrido, Maria Henar

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (p. 3-11) - 1/2011

https://doi.org/10.1177/0731684410385034 Ver en origen

  • ISSN 0731-6844

Thermo-mechanical load interactions in foam cored axi-symmetric sandwich circular plates - High-order and FE models

  • Santiuste Romero, Carlos
  • Thomsen, T. Ole
  • Frostig, Yeoshua

COMPOSITE STRUCTURES (p. 369-376) - 1/2011

https://doi.org/10.1016/j.compstruct.2010.09.005 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

Out-of-plane failure mechanisms in LFRP composite cutting

  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar
  • Soldani, Xavier

COMPOSITE STRUCTURES (p. 2706-2713) - 10/2011

https://doi.org/10.1016/j.compstruct.2011.05.034 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

Numerical modelling of foam-cored sandwich plates under high-velocity impact

  • Ivañez Del Pozo, Ines
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

COMPOSITE STRUCTURES (p. 2392-2399) - 8/2011

https://doi.org/10.1016/j.compstruct.2011.03.028 Ver en origen

  • EISSN 1879-1085
  • ISSN 0263-8223

Vigas de tipo laminado sometidas a cargas impulsiva: una aproximación analítica, numérica y experimental

  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

2011

Editor: Editorial Académica Española

  • ISBN 978-3844340440

Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites

  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

Fiber-Reinforced Composites (p. 497-526) - 10/2012

Editor: NOVA SCIENCE PUBLISHERS INC

  • ISBN 978-1-61470-433-1

Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites

  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Loya Lorenzo, Jose Antonio

Wiley Encyclopedia of Composites (p. 1-14) - 7/2012

Editor: WILEY

https://doi.org/10.1002/9781118097298.weoc200 Ver en origen

  • ISBN 978-1-11-809729-8

Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013

Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH

  • ISBN 978-94-007-5328-0

Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics

  • Miguelez Garrido, Maria Henar
  • Feito Sanchez, Norberto
  • Santiuste Romero, Carlos
  • Diaz Alvarez, Jose
  • Rodriguez Millan, Marcos
  • Soldani, Xavier

Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015

Editor: DE GRUYTER

https://doi.org/10.1515/9783110292251-005 Ver en origen

  • ISBN 9783110292251

Numerical Modeling of Post-Processing of Composite Materials

  • Soldani, Xavier
  • Santiuste Romero, Carlos
  • Loya Lorenzo, Jose Antonio
  • Miguelez Garrido, Maria Henar

2nd Special Symposium on New Frontiers in Materials Processing Training and Learning (p. 93-98) - 7/2011

https://doi.org/10.4028/www.scientific.net/msf.692.93 Ver en origen

  • EISSN 1662-9752
  • ISBN 978-3-03785-206-4
  • ISSN 0255-5476

Perforation Modelling of Thin Laminated Plates

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

Workshop on Dynamic Failure of Composite and Sandwich Structures - 2011

Impact on Tubuluar Composite Structures

  • Garcia Castillo, Shirley Kalamis
  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

16th International Conference on Composite Structures (ICCS16) - 2011

Estudio de la absorción de energía en elementos tubulares sometidos a impacto de baja energía = Study of Eergy Absorption in Tubular Elements Subjected to Low Energy Impacts

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

IX Congreso Nacional de Materiales Compuestos (MATCOMP 2011) - 2011

Failure Prediction in Honeycomb Sandwich Beams Under Low-Velocity Impact

  • Ivañez Del Pozo, Ines
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

18th International Conference on Composite Materials (ICCM18) - 2011

Numerical Modelling of Low-velocity Impact on Honeycomb Cored Sandwich Beams with Composite Face-sheets

  • Ivañez Del Pozo, Ines
  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia

16th International Conference on Composite Structures (ICCS16) - 2011

Three-dimensional modeling of machining processes

  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Diaz Garcia, Jose Alberto
  • Soldani, Xavier
  • Cantero Guisandez, Jose Luis

4th Manufacturing Engineering Society International Conference (MESIC 2011) = 4º Congreso Internacional de la Sociedad de Ingeniería de Fabricación (p. 255-260) - 2011

Editor: Trans Tech Publications Ltd.

https://doi.org/10.4028/www.scientific.net/amr.498.255 Ver en origen

  • ISBN 1022-6680

FE Modeling of Orthogonal Cutting of LFRP Composites

  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

XI International Conference on Computational Plasticity (COMPLAS XI): Fundamentals and Applications - 2011

Numerical Modeling of Delamination during Machining of LFRP Composites

  • Soldani, Xavier
  • Santiuste Romero, Carlos
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

18th International Conference on Composite Materials (ICCM18) - 2011

Modelización numérica del impacto a baja velocidad sobre vigas sándwich con núcleo metálico de nido de abeja

  • Ivañez Del Pozo, Ines
  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia

IX Congreso Nacional de Materiales Compuestos (MATCOMP'11) - 2011

Este/a investigador/a no tiene documentos de trabajo.

Este/a investigador/a no tiene informes técnicos.

Prestación de Servicios de Ingeniería en el Área de Ensayos Mecánicos Tracción-Control

  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis

Ejecución: 20-02-2006 - 22-03-2006

Tipo: Interno

Financiado por: AIRBUS OPERATIONS, S.L.

UC3M-IME-05-026 - CP05-AVANCE EN EL ESTUDIO DE CRITERIOS DE ROTURA EN CONDICIONES DINÁMICAS DE MATERIALES COMPUESTOS DE USO ESTRUCTURAL

  • Barbero Pozuelo, Enrique
  • Navarro Ugena, Carlos
  • Lopez Puente, Jorge
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis

Ejecución: 01-01-2006 - 31-01-2007

Financiado por: COMUNIDAD DE MADRID-UC3M

CCG06-UC3M/DPI-0771  - CP06: ANÁLISIS DEL PANDEO DE ELEMENTOS ESTRUCTURALES DAÑADOS POR IMPACTOS DE BAJA VELOCIDAD

  • Barbero Pozuelo, Enrique
  • Navarro Ugena, Carlos
  • Lopez Puente, Jorge
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis
  • Buitrago Perez, Brenda
... Ver más Contraer

Ejecución: 01-01-2007 - 29-02-2008

Financiado por: COMUNIDAD DE MADRID-UC3M

TRA2007-66555 - Aplicación de modelos de daño progresivo al análisis estructural de elementos fabricados con materiales compuestos de tipo laminado.

  • Barbero Pozuelo, Enrique
  • Navarro Ugena, Carlos
  • Lopez Puente, Jorge
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis
  • Sanchez Merino, Angel Luis
  • Buitrago Perez, Brenda
... Ver más Contraer

Ejecución: 01-10-2007 - 31-12-2010

Tipo: Nacional

Financiado por: MINISTERIO DE EDUCACION Y CIENCIA SEC. DE ESTADO DE UNIVERSIDADES E INVEST.

INNOVACIÓN EN COMPOSITES AVANZADOS Y REAR-END OPTIMIZADO (ICARO)

  • J.M. López
  • E. Barrera
  • M. Ruiz
  • G. de Arcas (Investigador principal (IP))
  • Barrera López de Turiso, Eduardo (Investigador/a)

Ejecución: 01-01-2008 - 31-12-2011

Tipo: Regional

Financiado por: AERNNOVA ENGINEERING SOLUTIONS S.A.

CCG07-UC3M/DPI-3406 - CP07: ANÁLISIS DE ELEMENTOS ABSORBEDORES DE ENERGÍA FABRICADOS CON MATERIALES COMPUESTOS SOMETIDOS A IMPACTO.

  • Barbero Pozuelo, Enrique
  • Lopez Puente, Jorge
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis
  • Buitrago Perez, Brenda

Ejecución: 01-01-2008 - 28-02-2009

Financiado por: COMUNIDAD DE MADRID-UC3M

Ice debris impact analysis

  • Lopez Puente, Jorge
  • Arias Hernandez, Angel
  • Loya Lorenzo, Jose Antonio
  • Fernandez Saez, Jose
  • Zaera Polo, Ramon Eulalio
  • Varas Doval, David
  • Santiuste Romero, Carlos
  • Pedroche Arias, David
... Ver más Contraer

Ejecución: 19-02-2009 - 29-05-2009

Financiado por: AIRBUS OPERATIONS, S.L.

CCG08-UC3M/DPI-4348 - CP08: Estudio de estructuras sandwich de materiales compuestos como elementos de seguridad pasiva en automóviles

  • Sanchez Saez, Sonia
  • Lopez Puente, Jorge
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis
  • Buitrago Perez, Brenda
  • Ivañez Del Pozo, Ines
  • Pedroche Arias, David
... Ver más Contraer

Ejecución: 01-01-2009 - 28-02-2010

Financiado por: COMUNIDAD DE MADRID-UC3M

Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Loya Lorenzo, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Cheriguene, Rachid
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose
  • Soldani, Xavier
... Ver más Contraer

Ejecución: 05-03-2009 - 20-05-2009

Financiado por: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

Trabajos de investigación sobre impactos de hielo en materiales compuestos

  • Lopez Puente, Jorge
  • Sevilla Santiago, Alejandro
  • Arias Hernandez, Angel
  • Loya Lorenzo, Jose Antonio
  • Fernandez Saez, Jose
  • Zaera Polo, Ramon Eulalio
  • Varas Doval, David
  • Zahr Viñuela, Jorge Alonso
  • Puerta Hueso, Sergio
  • Pedroche Arias, David
  • Pernas Sanchez, Jesus
  • Artero Guerrero, Jose Alfonso
... Ver más Contraer

Ejecución: 08-04-2010 - 30-09-2011

Tipo: Regional

Financiado por: FUNDACION IMDEA MATERIALES

Análisis experimental y numérico del taladrado de<br/> materiales compuestos .

  • Diaz Alvarez, Antonio
  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos

Fecha de defensa: 24-11-2017

Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.

  • Barbero Pozuelo, Enrique
  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos

Fecha de defensa: 23-10-2015

Defensa realizada en: CAMPUS DE LEGANES

Manufacturing, Characterization and Modelling of Biodegradable Composite Materials

  • Rubio Lopez, Angel
  • Santiuste Romero, Carlos

Fecha de defensa: 07-10-2016

Defensa realizada en: CAMPUS DE LEGANES

Análisis del comportamiento frente a impacto de protecciones personales fabricadas con polietileno de alto peso molecular (UHMWPE)

  • Peinado Seligrat, Jairo
  • Santiuste Romero, Carlos

Fecha de defensa: 08-07-2022

Este/a investigador/a no tiene patentes o licencias de software.

Última actualización de los datos: 5/03/24 16:37