The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Belda Gonzalez, Ricardo rbelda@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

An experimental and numerical investigation to characterize an aerospace composite material with open-hole using non-destructive techniques

  • Feito Sanchez, Norberto
  • Calvo Orozco, Jose Vicente
  • Belda Gonzalez, Ricardo
  • Giner, Eugenio

Sensors (p. 1-18) - 7/2020

https://doi.org/10.3390/s20154148 View at source

  • EISSN 1424-8220
  • ISSN 1424-3210
Open Access

Some practical considerations for compression failure characterization of open-cell polyurethane foams using digital image correlation

  • Belda Gonzalez, Ricardo
  • Megías, Raquel
  • Feito Sanchez, Norberto
  • Vercher Martínez, Ana
  • Giner, Eugenio

Sensors (p. 1-21) - 8/2020

https://doi.org/10.3390/s20154141 View at source

  • EISSN 1424-8220
  • ISSN 1424-3210
Open Access

Open cell polyurethane foam compression failure characterization and its relationship to morphometry

  • Belda Gonzalez, Ricardo
  • Palomar, Marta
  • Marco Esteban, Miguel
  • Vercher Martínez, Ana
  • Giner, Eugenio

Materials Science & Engineering C-Materials for Biological Applications (p. 1-13) - 1/2021

https://doi.org/10.1016/j.msec.2020.111754 View at source

  • EISSN 1873-0191
  • ISSN 0928-4931

Effect of different helmet shell configurations on the protection against head trauma.

  • Palomar, Marta
  • Belda Gonzalez, Ricardo
  • Giner, Eugenio

JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (p. 408-415) - 3/2019

https://doi.org/10.1177/0309324719835706 View at source

  • EISSN 2041-3130
  • ISSN 0309-3247

Ultra-high-molecular-weight polyethylene sublaminar tape as semirigid fixation or pedicle screw augmentation to prevent failure in long-segment spine surgery: an ex vivo biomechanical study

  • Doodkorte, Remco J. P.
  • Belda Gonzalez, Ricardo
  • Roth, Alex K.
  • Van Rietbergen, Bert
  • Arts, Jacobus J.
  • Lataster, Arno
  • Van Rhijn, Lodewijk W.
  • Willems, Paul C.
... View more Collapse

JOURNAL OF NEUROSURGERY-SPINE (p. 236-244) - 2/2021

https://doi.org/10.3171/2020.6.spine20605 View at source

  • EISSN 1547-5646
  • ISSN 1547-5654

Influence of machining parameters on fretting fatigue life of Inconel 718

  • Infante Garcia, Diego
  • Diaz Alvarez, Antonio
  • Belda Gonzalez, Ricardo
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Giner, E.
  • Miguelez Garrido, Maria Henar
... View more Collapse

International Journal of Fatigue (p. 1-12) - 9/2022

https://doi.org/10.1016/j.ijfatigue.2022.106963 View at source

  • EISSN 1879-3452
  • ISSN 0142-1123

Compression failure characterization of cancellous bone combining experimental testing, digital image correlation and finite element modeling.

  • Belda Gonzalez, Ricardo
  • Palomar, Marta
  • Peris-serra, José Luis
  • Vercher Martínez, Ana
  • Giner, Eugenio

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES - 1/2020

https://doi.org/10.1016/j.ijmecsci.2019.105213 View at source

  • EISSN 1879-2162
  • ISSN 0020-7403
Open Access

A comparison between some fracture modelling approaches in 2D LEFM using finite elements

  • Marco Esteban, Miguel
  • Infante Garcia, Diego
  • Belda Gonzalez, Ricardo
  • Giner, Eugenio

INTERNATIONAL JOURNAL OF FRACTURE (p. 151-171) - 2/2020

https://doi.org/10.1007/s10704-020-00426-6 View at source

  • EISSN 1573-2673
  • ISSN 0376-9429
Open Access

A heterogeneous orientation criterion for crack modelling in cortical bone using a phantom-node approach

  • Marco Esteban, Miguel
  • Belda Gonzalez, Ricardo
  • Miguelez Garrido, Maria Henar
  • Giner, Eugenio

FINITE ELEMENTS IN ANALYSIS AND DESIGN (p. 107-117) - 7/2018

10.1016/j.finel.2018.04.009 View at source

  • EISSN 1872-6925
  • ISSN 0168-874X

Calculation of the critical energy release rate Gc of the cement line in cortical bone combining experimental test and finite element models.

  • Giner, Eugenio
  • Belda Gonzalez, Ricardo
  • Arango, Camila
  • Vercher Martínez, Ana
  • Tarancon, J. E.
  • Fuenmayor, Francisco Javier

ENGINEERING FRACTURE MECHANICS (p. 168-182) - 8/2017

https://doi.org/10.1016/j.engfracmech.2017.08.026 View at source

  • EISSN 1873-7315
  • ISSN 0013-7944

This researcher has no books.

This researcher has no book chapters.

Open Access

Análisis del comportamiento elástico y la fractura a compresión de una muestra bioinspirada de hueso trabecular fabricada en ácido poliláctico

  • Megías, Raquel
  • Belda Gonzalez, Ricardo
  • Vercher Martínez, Ana
  • Giner, Eugenio

XXXVII Congreso del Grupo Español de Fractura - 2021

Editor: Sociedad Española de Integridad Estructural

  • ISBN 2792-4246
Open Access

Modelling fracture propagation in cortical bone tissue at a microscopid scale using the phantom-nodes technique

  • Marco Esteban, Miguel
  • Belda, R.
  • Miguelez Garrido, Maria Henar
  • Giner, E.

XXXV Encuentro del grupo español de fractura (p. 244-250) - 2018

Editor: S.E.I.E. GRUPO ESPAÑOL DE FRACTURA

  • ISBN 0213-3725
Open Access

Semi-automated knee joint segmentation from magnetic resonance images based on a subchondral bone approach.

  • Belda Gonzalez, Ricardo
  • Infante Garcia, Diego
  • Alberich Gayarri, Angel
  • Sanz Requena, Roberto
  • Marti Bonmati, Luis
  • Giner, Eugenio

XXIV Brazilian Congress on Biomedical Engineering CBEB 2014 (p. 1526-1529) - 2014

Editor: Sociedade Brasileira de Engenharia Biomédica

  • ISBN 2359-3164
Open Access

Patient-specific mechanical simulation of the knee with integration of magnetic resonance T1-T2 values.

  • Infante Garcia, Diego
  • Belda Gonzalez, Ricardo
  • Alberich Bayarri, Angel
  • Sanz Requena, Roberto
  • Marti Bonmati, Luis
  • Giner, Eugenio

XXIV Brazilian Congress on Biomedical Engineering CBEB 2014 (p. 1530-1533) - 2014

Editor: Sociedade Brasileira de Engenharia Biomédica

  • ISBN 2359-3164
Open Access

Análisis experimental y correlación numérica de la respuesta a compresión de un simulante de hueso trabecular obtenido por fabricación aditiva.

  • Megias Diaz, Raquel
  • Belda Gonzalez, Ricardo
  • Vercher Martínez, Ana
  • Giner Maravilla, Eugenio

XXIII Congreso Nacional de Ingeniería Mecánica (CNIM 2020) (p. 72-72) - 2021

Editor: ASOCIACION ESPAÑOLA DE INGENIERIA MECANICA

  • ISBN 0212-5072
Open Access

Numerical modelling of fracture propagation in cortical bone considering its heterogeneous structure

  • Marco Esteban, Miguel
  • Belda Gonzalez, Ricardo
  • Miguelez Garrido, Maria Henar
  • Giner, Eugenio

XXII Congreso Nacional Ingeniería Mecánica - 2018

Editor: UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA (UNED)

  • ISBN 0212-5072
Open Access

Estimación numérica de las constantes elásticas de estructuras impresas en PLA y validación mediante ensayos experimentales.

  • Arias Blanco, Adrian
  • Marco Esteban, Miguel
  • Belda Gonzalez, Ricardo
  • Miguelez Garrido, Maria Henar

XV Congreso Iberoamericano de Ingeniería Mecánica - 2022

Editor: UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA (UNED)

https://doi.org/10.5944/bicim2022.034 View at source

Open Access

Caracterización geométrica y mecánica de estructuras impresas en PLA y validación mediante ensayos experimentales

  • Arias Blanco, Adrian
  • Marco Esteban, Miguel
  • Belda Gonzalez, Ricardo
  • Miguelez Garrido, Maria Henar

XI Reunión del Capítulo Español de la Sociedad Europea de Biomecánica - 2022

Open Access

Estimación de los límites resistentes del tejido lamelar en función de la porosidad y densidad mineral ósea.

  • Vercher Martínez, Ana
  • Perez, Francesc
  • Megias Diaz, Raquel
  • Belda Gonzalez, Ricardo
  • Giner Maravilla, Eugenio

XI Reunión del Capítulo Español de la Sociedad Europea de Biomecánica - 2022

Open Access

Estudio morfométrico de hueso trabecular sano, osteoporótico y artrósico de cabezas femorales humanas.

  • Megias Diaz, Raquel
  • Belda Gonzalez, Ricardo
  • Garrigos Simon, Jose Alejandro
  • Vercher Martínez, Ana
  • Giner Maravilla, Eugenio

XI Reunión del Capítulo Español de la Sociedad Europea de Biomecánica - 2022

This researcher has no working papers.

This researcher has no technical reports.

Gemelos digitales para el diseño biomecánico avanzado de protecciones de cabeza en deportes con riesgo de impacto

  • Miguelez Garrido, Maria Henar
  • Loya Lorenzo, Jose Antonio
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Marco Esteban, Miguel
  • Rubio Diaz, Ignacio
  • Belda Gonzalez, Ricardo
... View more Collapse

Period: 24-03-2023 - 30-11-2023

Type of funding: National

Funding entity: CONSEJO SUPERIOR DE DEPORTES

This researcher has no supervised thesis.

This researcher has no patents or software licenses.

Last data update: 8/11/23 7:44 PM