The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Belda Gonzalez, Ricardo rbelda@ing.uc3m.es
Publications
- Articles 14
- Books 0
- Book chapters 0
- Conferences 30
- Working papers 0
- Technical reports 0
- Research projects 1
- Supervised theses 0
- Patent or software license 0
A comparison between some fracture modelling approaches in 2D LEFM using finite elements
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Belda Gonzalez, Ricardo
- Giner, Eugenio
INTERNATIONAL JOURNAL OF FRACTURE (p. 151-171) - 2/2020
https://doi.org/10.1007/s10704-020-00426-6 View at source
- EISSN 1573-2673
- ISSN 0376-9429
A heterogeneous orientation criterion for crack modelling in cortical bone using a phantom-node approach
- Marco Esteban, Miguel
- Belda Gonzalez, Ricardo
- Miguelez Garrido, Maria Henar
- Giner, Eugenio
FINITE ELEMENTS IN ANALYSIS AND DESIGN (p. 107-117) - 7/2018
10.1016/j.finel.2018.04.009 View at source
- EISSN 1872-6925
- ISSN 0168-874X
An experimental and numerical investigation to characterize an aerospace composite material with open-hole using non-destructive techniques
- Feito Sanchez, Norberto
- Calvo Orozco, Jose Vicente
- Belda Gonzalez, Ricardo
- Giner, Eugenio
Sensors (p. 1-18) - 7/2020
https://doi.org/10.3390/s20154148 View at source
- EISSN 1424-8220
- ISSN 1424-3210
Calculation of the critical energy release rate Gc of the cement line in cortical bone combining experimental test and finite element models.
- Giner, Eugenio
- Belda Gonzalez, Ricardo
- Arango, Camila
- Vercher Martínez, Ana
- Tarancon, J. E.
- Fuenmayor, Francisco Javier
ENGINEERING FRACTURE MECHANICS (p. 168-182) - 8/2017
https://doi.org/10.1016/j.engfracmech.2017.08.026 View at source
- EISSN 1873-7315
- ISSN 0013-7944
Compression failure characterization of cancellous bone combining experimental testing, digital image correlation and finite element modeling.
- Belda Gonzalez, Ricardo
- Palomar, Marta
- Peris-serra, José Luis
- Vercher Martínez, Ana
- Giner, Eugenio
INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES - 1/2020
https://doi.org/10.1016/j.ijmecsci.2019.105213 View at source
- EISSN 1879-2162
- ISSN 0020-7403
Effect of different helmet shell configurations on the protection against head trauma.
- Palomar, Marta
- Belda Gonzalez, Ricardo
- Giner, Eugenio
JOURNAL OF STRAIN ANALYSIS FOR ENGINEERING DESIGN (p. 408-415) - 3/2019
https://doi.org/10.1177/0309324719835706 View at source
- EISSN 2041-3130
- ISSN 0309-3247
Explicit expressions for the estimation of the elastic constants of lamellar bone as function of the volumetric mineral content using a multi-scale approach.
- Vercher Martínez, Ana
- Giner, Eugenio
- Belda Gonzalez, Ricardo
- Aigoun, Abdelmalik
- Fuenmayor, Francisco Javier
BIOMECHANICS AND MODELING IN MECHANOBIOLOGY (p. 449-464) - 1/2018
https://doi.org/10.1007/s10237-017-0971-x View at source
- ISSN 1617-7940
Influence of machining parameters on fretting fatigue life of Inconel 718
- Infante Garcia, Diego
- Diaz Alvarez, Antonio
- Belda Gonzalez, Ricardo
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Giner, E.
- Miguelez Garrido, Maria Henar
International Journal of Fatigue (p. 1-12) - 9/2022
https://doi.org/10.1016/j.ijfatigue.2022.106963 View at source
- EISSN 1879-3452
- ISSN 0142-1123
Numerical analysis of mechanical behaviour of lattice and porous structures
- Marco Esteban, Miguel
- Belda Gonzalez, Ricardo
- Miguelez Garrido, Maria Henar
- Giner, Eugenio
COMPOSITE STRUCTURES (p. 113292-113307) - 10/2020
https://doi.org/10.1016/j.compstruct.2020.113292 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Numerical analysis of the influence of triply periodic minimal surface structures morphometry on the mechanical response.
- Belda Gonzalez, Ricardo
- Megías, Raquel
- Marco Esteban, Miguel
- Vercher Martínez, Ana
- Giner, Eugenio
Computer Methods and Programs in Biomedicine (p. 107342,1-107342, 17) - 1/2023
10.1016/j.cmpb.2023.107342 View at source
- ISSN 0169-2607
This researcher has no books.
This researcher has no book chapters.
Análisis del comportamiento elástico y la fractura a compresión de una muestra bioinspirada de hueso trabecular fabricada en ácido poliláctico
- Megías, Raquel
- Belda Gonzalez, Ricardo
- Vercher Martínez, Ana
- Giner, Eugenio
XXXVII Congreso del Grupo Español de Fractura - 2021
Editor: Sociedad Española de Integridad Estructural
- ISBN 2792-4246
Análisis experimental y correlación numérica de la respuesta a compresión de un simulante de hueso trabecular obtenido por fabricación aditiva.
- Megias Diaz, Raquel
- Belda Gonzalez, Ricardo
- Vercher Martínez, Ana
- Giner Maravilla, Eugenio
XXIII Congreso Nacional de Ingeniería Mecánica (CNIM 2020) (p. 72-72) - 2021
Editor: ASOCIACION ESPAÑOLA DE INGENIERIA MECANICA
- ISBN 0212-5072
Cancellous bone fracture modeled by finite elements at microscale.
- Belda Gonzalez, Ricardo
- Vercher Martínez, Ana
- Giner, Eugenio
23th Congress of the European Society of Biomechanics - 2017
Caracterización geométrica y mecánica de estructuras impresas en PLA y validación mediante ensayos experimentales
- Arias Blanco, Adrian
- Marco Esteban, Miguel
- Belda Gonzalez, Ricardo
- Miguelez Garrido, Maria Henar
XI Reunión del Capítulo Español de la Sociedad Europea de Biomecánica - 2022
Effect of the stack configuration of a combat helmet composite shell on head trauma.
- Palomar, Marta
- Belda Gonzalez, Ricardo
- Lozano Minguez, Estivaliz
- Giner, Eugenio
25th Congress of the European Society of Biomechanics (p. 331-331) - 2019
- ISBN 978-3-903024-96-0
Estimación de la tasa de liberación de energía crítica Gc de la línea cementante en microprobetas de hueso cortical sometidas a flexión en 3 puntos.
- Tudela, Juan José
- Belda Gonzalez, Ricardo
- Arango, Camila
- Giner, Eugenio
VI Reunión del Capítulo Nacional Español de la Sociedad Europea de Biomecánica (p. 54-55) - 2016
- ISBN 978-84-697-6124-3
Estimación de los límites resistentes del tejido lamelar en función de la porosidad y densidad mineral ósea.
- Vercher Martínez, Ana
- Perez, Francesc
- Megias Diaz, Raquel
- Belda Gonzalez, Ricardo
- Giner Maravilla, Eugenio
XI Reunión del Capítulo Español de la Sociedad Europea de Biomecánica - 2022
Estimación de propiedades elásticas y resistentes de la línea cementante en tejido óseo cortical a partir de ensayos experimentales y modelos de elementos finitos.
- Belda Gonzalez, Ricardo
- Arango, Camila
- Tudela, Carlos
- Giner, Eugenio
33 Encuentro del Grupo Español de Fractura (p. 229-234) - 2016
Editor: S.E.I.E. GRUPO ESPAÑOL DE FRACTURA
Estimación de propiedades homogéneas en un RVE de hueso trabecular a partir de un modelo paramétrico simplificado.
- Belda Gonzalez, Ricardo
- Tudela, Juan José
- Vercher Martínez, Ana
- Giner, Eugenio
VI Reunión del Capítulo Nacional Español de la Sociedad Europea de Biomecánica (p. 56-57) - 2016
- ISBN 978-84-697-6124-3
Estimación numérica de las constantes elásticas de estructuras impresas en PLA y validación mediante ensayos experimentales.
- Arias Blanco, Adrian
- Marco Esteban, Miguel
- Belda Gonzalez, Ricardo
- Miguelez Garrido, Maria Henar
XV Congreso Iberoamericano de Ingeniería Mecánica - 2022
Editor: UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA (UNED)
This researcher has no working papers.
This researcher has no technical reports.
Gemelos digitales para el diseño biomecánico avanzado de protecciones de cabeza en deportes con riesgo de impacto
- Miguelez Garrido, Maria Henar
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Belda Gonzalez, Ricardo
Period: 24-03-2023 - 30-11-2023
Type of funding: National
Funding entity: CONSEJO SUPERIOR DE DEPORTES
This researcher has no supervised thesis.
This researcher has no patents or software licenses.
Researcher profiles
-
ORCID
-
Scopus Author ID