The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Cantero Guisandez, Jose Luis jcantero@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

Open Access

Thermo-Viscoplastic Behavior of Ni-Based Superalloy Haynes 282 and Its Application to Machining Simulation

  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Bernier, Richard
  • Cantero Guisandez, Jose Luis
  • Rusinek, Alexis
  • Miguelez Garrido, Maria Henar

Metals - 12/2017

https://doi.org/10.3390/met7120561 View at source

  • ISSN 2075-4701

Theoretical Analysis of Air Beding Al High Temperature

  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

JOURNAL OF MATERIALS PROCESSING TECHNOLOGY (p. 1342-1350) - 2/2009

https://doi.org/10.1016/j.jmatprotec.2008.03.038 View at source

  • EISSN 1873-4774
  • ISSN 0924-0136
Open Access

Sustainable high-speed finishing turning of haynes 282 using carbide tools in dry conditions

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

Metals (p. 1-14) - 9/2019

https://doi.org/10.3390/met9090989 View at source

  • ISSN 2075-4701
Open Access

PCBN Performance in High Speed Finishing Turning of Inconel 718

  • Diaz Alvarez, Jose
  • Criado Del Alamo, Victor
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Metals - 7/2018

10.3390/met8080582 View at source

  • ISSN 2075-4701

Numerical analysis of thermomechanical phenomena influencing tool wear in finishing turning of Inconel 718

  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Soldani, Xavier

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (p. 161-169) - 5/2014

https://doi.org/10.1016/j.ijmecsci.2014.03.010 View at source

  • EISSN 1879-2162
  • ISSN 0020-7403

Numerical analysis of the tool wear effect in the machining induced residual stresses

  • Muñoz Sanchez, Ana
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

SIMULATION MODELLING PRACTICE AND THEORY (p. 872-886) - 2/2011

https://doi.org/10.1016/j.simpat.2010.11.011 View at source

  • EISSN 1878-1462
  • ISSN 1569-190X
Open Access

Machine learning approach in non-intrusive monitoring of tool wear evolution in massive CFRP automatic drilling processes in the aircraft industry

  • Dominguez Monferrer, Carlos
  • Fernandez Perez, Juan
  • Santos Garcia, Raul De
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

JOURNAL OF MANUFACTURING SYSTEMS (p. 622-639) - 10/2022

https://doi.org/10.1016/j.jmsy.2022.10.018 View at source

  • EISSN 1878-6642
  • ISSN 0278-6125

Influencia del nivel de lubricación en el taladrado de apilados híbridos fibra de carbono-titanio aplicando MQL (Mínima Cantidad de Lubricante):monitorización del proceso = Lubrication levels influence on carbon fiber-titanium hybrid stacks drilling applying MQL (Minimum Quantity Lubrication): process monitoring

  • Fernandez Perez, Juan
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

Dyna (p. 579-584) - 9/2019

10.6036/8992 View at source

  • EISSN 1989-1490
  • ISSN 0012-7361

Influence of machining parameters on fretting fatigue life of Inconel 718

  • Infante Garcia, Diego
  • Diaz Alvarez, Antonio
  • Belda Gonzalez, Ricardo
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Giner, E.
  • Miguelez Garrido, Maria Henar
... View more Collapse

International Journal of Fatigue (p. 1-12) - 9/2022

https://doi.org/10.1016/j.ijfatigue.2022.106963 View at source

  • EISSN 1879-3452
  • ISSN 0142-1123
Open Access

Influence of cutting parameters on tool wear and hole quality in composite aerospace components drilling

  • Fernandez Perez, Juan
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 157-161) - 10/2017

https://doi.org/10.1016/j.compstruct.2017.06.043 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

This researcher has no books.

This researcher has no book chapters.

Open Access

CFRP drilling process control based on spindle power consumption from real production data in the aircraft industry

  • Dominguez Monferrer, Carlos
  • Fernandez Perez, Juan
  • Santos Garcia, Raul De
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

CMS 2022: 55th CIRP Conference on Manufacturing Systems (p. 1533-1538) - 2022

Editor: ELSEVIER

https://doi.org/10.1016/j.procir.2022.05.187 View at source

  • ISBN 2212-8271

3D numerical modelling of machining

  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Ahmed Ramadan, Mohamed
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

20th International Conference on Computer Methods in Mechanics - 2013

2D and 3D Approaches to Simulation of Metal and Composite Cutting

  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Marin Calvo, Nacari Del Carmen
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

4th Manufacturing Engineering Society International Conference (MESIC 2011) (p. 651-659) - 2012

Editor: AMER INST PHYSICS

  • ISBN 978-84-615-6973-1

This researcher has no working papers.

This researcher has no technical reports.

Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Torralba Castello, Jose Manuel
  • Rabanal Jimenez, Maria Eugenia
  • Campos Gomez, Monica
  • Ruiz Navas, Elisa Maria
  • Bolzoni, Leandro
  • Tsipas, Sophia Alexandra
  • Torres Miranda, Eloy Alexander
... View more Collapse

Period: 01-01-2012 - 31-12-2013

Type of funding: Regional

Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)

DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas

  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis

Period: 01-01-2018 - 30-09-2021

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Loya Lorenzo, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Cheriguene, Rachid
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose
  • Soldani, Xavier
... View more Collapse

Period: 05-03-2009 - 20-05-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

Proyecto de Sensorización del Simulador de Vuelo del Helicóptero SA-350-B2 de la DGT

  • Miguelez Garrido, Maria Henar
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Pulido Dominguez, Agustin
  • Serrano Dieguez, Fernando
  • Sanz Diaz, Raul
  • Peña Rodriguez, Jesus
... View more Collapse

Period: 27-02-2006 - 30-06-2006

Type of funding: Regional

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

CCG07-UC3M/DPI-3396 - Predicción de tensiones residuales y desgaste de herramienta en procesos de corte ortogonal, mediante simulación numérica

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Cantero Guisandez, Jose Luis
  • Muñoz Abella, Maria Belen
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
... View more Collapse

Period: 01-01-2008 - 31-12-2008

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

DPI2008-06746 - Modelización numérica e integridad superficial en el torneado en seco de Inconel 718

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Soldani, Xavier

Period: 01-01-2009 - 31-03-2012

Type of funding: National

Funding entity: MINISTERIO DE CIENCIA E INNOVACION

UC3M-IME-05-025 - Modelización numérica de los procesos de mecanizado y validación experimental

  • Miguelez Garrido, Maria Henar
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
... View more Collapse

Period: 01-01-2006 - 31-12-2006

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

DPI2011-25999 - Modelización del proceso de taladrado de materiales compuestos de fibra de carbono

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • De La Cruz Hernandez, Jesus Alberto
  • Soldani, Xavier
  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
... View more Collapse

Period: 01-01-2012 - 31-12-2014

Type of funding: National

Funding entity: MINISTERIO DE CIENCIA E INNOVACION

Fabricación de 2 embellecedores de chapa con cubre polvo para los mandos colectivo y suministros de 2 tiradores para piloto y copiloto

  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose

Period: 15-10-2009 - 16-11-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Dominguez Monferrer, Carlos
  • Hernandez Del Valle, Alejandro
  • Ramajo Ballester, Alvaro
  • Guerra Sancho, Antonio
... View more Collapse

Period: 26-05-2022 - 23-12-2022

Type of funding: International

Funding entity: AIRBUS OPERATIONS, S.L.

Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte

  • Criado Del Alamo, Victor
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis

2020

Reading date: 17-12-2020

Reading institution: Universidad Carlos III de Madrid

Drilling processes improvement for multi material CFRP-AL-TI stacks

  • Fernandez Perez, Juan
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Reading date: 18-12-2020

Análisis termodinámico de la influencia del desgaste geométrico de las herramientas en procesos de corte ortogonal de aceros inoxidables austeniticos

  • Canteli Fernandez, Jose Antonio
  • Marin Calvo, Nacari Del Carmen
  • Cantero Guisandez, Jose Luis

Reading date: 14-12-2010

Análisis del daño térmico del material en el proceso de taladrado en seco de aleaciones de Titanio

  • Cantero Guisandez, Jose Luis
  • De La Cruz Hernandez, Jesus Alberto

Reading date: 17-09-2015

Reading institution: CAMPUS DE LEGANES

This researcher has no patents or software licenses.

Last data update: 4/8/24 9:02 PM