The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Cantero Guisandez, Jose Luis jcantero@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

Open Access

Analysis of tool wear patterns in finishing turning of Inconel 718

  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar
  • Marin Calvo, Nacari Del Carmen

WEAR (p. 885-894) - 1/2013

https://doi.org/10.1016/j.wear.2012.11.004 View at source

  • EISSN 1873-2577
  • ISSN 0043-1648

Numerical analysis of the tool wear effect in the machining induced residual stresses

  • Muñoz Sanchez, Ana
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

SIMULATION MODELLING PRACTICE AND THEORY (p. 872-886) - 2/2011

https://doi.org/10.1016/j.simpat.2010.11.011 View at source

  • EISSN 1878-1462
  • ISSN 1569-190X
Open Access

High-pressure cooling in finishing turning of haynes 282 using carbide tools: Haynes 282 and inconel 718 comparison

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

Metals (p. 1-20) - 11/2021

https://doi.org/10.3390/met11121916 View at source

  • ISSN 2075-4701
Open Access

Finishing turning of Ni superalloy Haynes 282

  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Metals (p. 1-12) - 10/2018

https://doi.org/10.3390/met8100843 View at source

  • ISSN 2075-4701
Open Access

High Speed Finish Turning of Inconel 718 Using PCBN Tools under Dry Conditions

  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Infante Garcia, Diego
  • Rodriguez Millan, Marcos
  • Criado Del Alamo, Victor

Metals - 3/2018

10.3390/met8030192 View at source

  • ISSN 2075-4701
Open Access

PCBN Performance in High Speed Finishing Turning of Inconel 718

  • Diaz Alvarez, Jose
  • Criado Del Alamo, Victor
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Metals - 7/2018

10.3390/met8080582 View at source

  • ISSN 2075-4701
Open Access

Sustainable high-speed finishing turning of haynes 282 using carbide tools in dry conditions

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

Metals (p. 1-14) - 9/2019

https://doi.org/10.3390/met9090989 View at source

  • ISSN 2075-4701
Open Access

Thermo-Viscoplastic Behavior of Ni-Based Superalloy Haynes 282 and Its Application to Machining Simulation

  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Bernier, Richard
  • Cantero Guisandez, Jose Luis
  • Rusinek, Alexis
  • Miguelez Garrido, Maria Henar

Metals - 12/2017

https://doi.org/10.3390/met7120561 View at source

  • ISSN 2075-4701
Open Access

A new cutting device design to study the orthogonal cutting of CFRP laminates at different cutting speeds

  • Criado Del Alamo, Victor
  • Feito Sanchez, Norberto
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose

Materials - MDPI (p. 1-13) - 12/2019

https://doi.org/10.3390/ma12244074 View at source

  • ISSN 1996-1944
Open Access

Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs

  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

Materials - MDPI (p. 4258-4271) - 5/2014

https://doi.org/10.3390/ma7064258 View at source

  • ISSN 1996-1944

This researcher has no books.

This researcher has no book chapters.

Open Access

CFRP drilling process control based on spindle power consumption from real production data in the aircraft industry

  • Dominguez Monferrer, Carlos
  • Fernandez Perez, Juan
  • Santos Garcia, Raul De
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

CMS 2022: 55th CIRP Conference on Manufacturing Systems (p. 1533-1538) - 2022

Editor: ELSEVIER

https://doi.org/10.1016/j.procir.2022.05.187 View at source

  • ISBN 2212-8271
Open Access

Tool wear and induced damage in CFRP drilling with step and double point angle drill bits

  • Fernandez Perez, Juan
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

8th Manufacturing Engineering Society International Conference, MESIC 2019 (p. 610-617) - 2019

Editor: ELSEVIER

https://doi.org/10.1016/j.promfg.2019.09.049 View at source

  • ISBN 2351-9789
Open Access

Influence of the undeformed chip cross section in finishing turning of Inconel 718 with PCBN tools

  • Infante Garcia, Diego
  • Diaz Alvarez, Antonio
  • Cantero Guisandez, Jose Luis
  • Muñoz Sanchez, Ana
  • Miguelez Garrido, Maria Henar

8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 122-125) - 2018

Editor: ELSEVIER

https://doi.org/10.1016/j.procir.2018.08.246 View at source

Open Access

Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures

  • Criado Del Alamo, Victor
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 634-637) - 2018

Editor: ELSEVIER

https://doi.org/10.1016/j.procir.2018.08.189 View at source

  • ISBN 2212-8271

Composite fiber reinforced plastic one-shoot drilling: quality inspection assessment and tool wear evaluation

  • Fernandez Perez, Jose Luis
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 139-145) - 2017

Editor: ELSEVIER

https://doi.org/10.1016/j.promfg.2017.09.021 View at source

  • ISBN 2351-9789

Surface integrity in finishing turning of Inconel 718

  • Diaz Alvarez, Jose
  • Soldani, Xavier
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

5th Manufacturing Engineering Society International Conference (MESIC 2013) - 2013

2D and 3D Approaches to Simulation of Metal and Composite Cutting

  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Marin Calvo, Nacari Del Carmen
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

4th Manufacturing Engineering Society International Conference (MESIC 2011) (p. 651-659) - 2012

Editor: AMER INST PHYSICS

  • ISBN 978-84-615-6973-1

Three-dimensional modeling of machining processes

  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Diaz Garcia, Jose Alberto
  • Soldani, Xavier
  • Cantero Guisandez, Jose Luis

4th Manufacturing Engineering Society International Conference (MESIC 2011) = 4º Congreso Internacional de la Sociedad de Ingeniería de Fabricación (p. 255-260) - 2011

Editor: Trans Tech Publications Ltd.

https://doi.org/10.4028/www.scientific.net/amr.498.255 View at source

  • ISBN 1022-6680

Lagrangian and ALE approach for predicting residual stresses in orthogonal cutting

  • Marin Calvo, Nacari Del Carmen
  • Miguelez Garrido, Maria Henar
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis

36th Solid Mechanics Conference - 2008

3D numerical modelling of machining

  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Ahmed Ramadan, Mohamed
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

20th International Conference on Computer Methods in Mechanics - 2013

This researcher has no working papers.

This researcher has no technical reports.

Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)

  • Loya Lorenzo, Jose Antonio
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Isasi Sanchez, Luis
  • Santiuste Romero, Carlos
  • Puerta Hueso, Sergio
  • Pedroche Arias, David
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Marco Esteban, Miguel
  • Rubio Diaz, Ignacio
  • Infante Garcia, Diego
  • Miguelez Garrido, Beatriz
  • Mantecon Padin, Ramiro
  • Rufo Martin, Celia
  • Valverde Marcos, Borja
  • Alvarez Blanco, Mario
... View more Collapse

Period: 18-06-2020 - 17-06-2023

Type of funding: Regional

Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES

DPI2017-89197-C2-1-R - Taladrado de componentes híbridos CFRPs/Ti y tolerancia al daño debido a mecanizado durante el comportamiento en servicio de uniones estructurales aeronáuticas

  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis

Period: 01-01-2018 - 30-09-2021

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Torralba Castello, Jose Manuel
  • Rabanal Jimenez, Maria Eugenia
  • Campos Gomez, Monica
  • Ruiz Navas, Elisa Maria
  • Bolzoni, Leandro
  • Tsipas, Sophia Alexandra
  • Torres Miranda, Eloy Alexander
... View more Collapse

Period: 01-01-2012 - 31-12-2013

Type of funding: Regional

Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)

UC3M-IME-05-025 - Modelización numérica de los procesos de mecanizado y validación experimental

  • Miguelez Garrido, Maria Henar
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
... View more Collapse

Period: 01-01-2006 - 31-12-2006

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

CCG10-UC3M/DPI-4585 - Desarrollo de un método no destructivo de detección e identificación de fisuras en ejes no rotatorios

  • Muñoz Abella, Maria Belen
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Cantero Guisandez, Jose Luis
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
  • Soldani, Xavier
  • Rubio Herrero, Patricia
... View more Collapse

Period: 01-01-2011 - 31-12-2011

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

Drilling process improvement based on data analysis

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Martin Gomez, David
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Gomez Silva, Maria Jose
  • Fernandez Perez, Juan
  • Dominguez Monferrer, Carlos
  • Armingol Robles, Ignacio
  • Santos Garcia, Raul De
... View more Collapse

Period: 18-12-2019 - 31-12-2021

Type of funding: Regional

Funding entity: AIRBUS OPERATIONS, S.L.

Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Dominguez Monferrer, Carlos
  • Hernandez Del Valle, Alejandro
  • Ramajo Ballester, Alvaro
  • Guerra Sancho, Antonio
... View more Collapse

Period: 26-05-2022 - 23-12-2022

Type of funding: International

Funding entity: AIRBUS OPERATIONS, S.L.

PDC2021-121368- C21 - DIGITDRILL - Digitalization of industrial drilling process

  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Antonio

Period: 01-12-2021 - 30-11-2023

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Loya Lorenzo, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Cheriguene, Rachid
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose
  • Soldani, Xavier
... View more Collapse

Period: 05-03-2009 - 20-05-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

PID2020-118480RB-C22 - Análisis de defectos en laminados reforzados con fibras debidos a procesos de fabricación y efecto en el comportamiento a fatiga

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Diaz Alvarez, Jose

Period: 01-09-2021 - 31-08-2024

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Drilling processes improvement for multi material CFRP-AL-TI stacks

  • Fernandez Perez, Juan
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Reading date: 18-12-2020

Análisis del daño térmico del material en el proceso de taladrado en seco de aleaciones de Titanio

  • Cantero Guisandez, Jose Luis
  • De La Cruz Hernandez, Jesus Alberto

Reading date: 17-09-2015

Reading institution: CAMPUS DE LEGANES

Análisis termodinámico de la influencia del desgaste geométrico de las herramientas en procesos de corte ortogonal de aceros inoxidables austeniticos

  • Canteli Fernandez, Jose Antonio
  • Marin Calvo, Nacari Del Carmen
  • Cantero Guisandez, Jose Luis

Reading date: 14-12-2010

Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte

  • Criado Del Alamo, Victor
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis

2020

Reading date: 17-12-2020

Reading institution: Universidad Carlos III de Madrid

This researcher has no patents or software licenses.

Last data update: 4/8/24 9:02 PM