The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Diaz Alvarez, Antonio andiaza@ing.uc3m.es
Publications
- Articles 19
- Books 0
- Book chapters 0
- Conferences 15
- Working papers 0
- Technical reports 0
- Research projects 10
- Supervised theses 1
- Patent or software license 0
Sustainable high-speed finishing turning of haynes 282 using carbide tools in dry conditions
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-14) - 9/2019
https://doi.org/10.3390/met9090989 View at source
- ISSN 2075-4701
Postmortem analysis using different sensors and technologies on aramid composites samples after ballistic impact
- Rubio Diaz, Ignacio
- Diaz Alvarez, Antonio
- Bernier, Richard
- Rusinek, Alexis
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Rodriguez Millan, Marcos
Sensors (p. 1-16) - 5/2020
https://doi.org/10.3390/s20102853 View at source
- EISSN 1424-8220
- ISSN 1424-3210
Multi-objective optimization analysis of cutting parameters when drilling composite materials with special geometry drills
- Feito Sanchez, Norberto
- Muñoz Sanchez, Ana
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES - 10/2019
10.1016/j.compstruct.2019.111187 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Manufacture of compression moulded PLA based biocomposites: A parametric study
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 995-1000) - 11/2015
https://doi.org/10.1016/j.compstruct.2015.06.066 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Machinability of INCONEL718 Alloy with a Porous Microstructure Produced by Laser Melting Powder Bed Fusion at Higher Energy Densities
- Wood, Paul
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Rusinek, Alexis
- Gunputh, Urvashi F.
- Williams, Gavin
- Bahi, Slim
- Sienkiewicz, Judyta
- Platek, Pawel
Materials - MDPI - 12/2020
https://doi.org/10.3390/ma13245730 View at source
- ISSN 1996-1944
Influence of machining parameters on fretting fatigue life of Inconel 718
- Infante Garcia, Diego
- Diaz Alvarez, Antonio
- Belda Gonzalez, Ricardo
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Giner, E.
- Miguelez Garrido, Maria Henar
International Journal of Fatigue (p. 1-12) - 9/2022
https://doi.org/10.1016/j.ijfatigue.2022.106963 View at source
- EISSN 1879-3452
- ISSN 0142-1123
High-pressure cooling in finishing turning of haynes 282 using carbide tools: Haynes 282 and inconel 718 comparison
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-20) - 11/2021
https://doi.org/10.3390/met11121916 View at source
- ISSN 2075-4701
Finishing turning of Ni superalloy Haynes 282
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Metals (p. 1-12) - 10/2018
https://doi.org/10.3390/met8100843 View at source
- ISSN 2075-4701
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 700-709) - 2/2019
https://doi.org/10.1016/j.compstruct.2018.11.018 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental and Numerical Analysis of Conical Projectile Impact on Inconel 718 Plates
- Rodriguez Millan, Marcos
- Diaz Alvarez, Antonio
- Bernier, Richard
- Miguelez Garrido, Maria Henar
- Loya Lorenzo, Jose Antonio
Metals (p. 1-12) - 6/2019
https://doi.org/10.3390/met9060638 View at source
- ISSN 2075-4701
This researcher has no books.
This researcher has no book chapters.
Simulation of the impact behavior of PLA/Flax biocomposites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Diaz Alvarez, Antonio
- Escobar Ortiz-villajos, Eric
- Santiuste Romero, Carlos
19th International Conference on Composite Structures (ICCS19) (p. 172-173) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978887889778
Parametric study on the manufacturing of biocomposite materials
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
ICNF 2015: 2nd International Conference on Natural Fibers (p. 243-254) - 2016
Editor: SPRINGER SCIENCE BUSINESS MEDIA B.V.
https://doi.org/10.1007/978-94-017-7515-1_18 View at source
- ISBN 978-94-017-7513-7
Numerical study of the behaviour of natural fibres composites under low-velocity impact
- Rubio Lopez, Angel
- Diaz Alvarez, Antonio
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
ICCS18: 18th International Conference on Composite Structures - 2015
Numerical modelling of the thermal effects on material in drilling processes Ti6Al4V alloy
- Diaz Alvarez, Jose
- Cruz Hernandez, Jesus Alberto De La
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
Manufacturing Engineering Society International Conference (MESIC 2015) (p. 427-432) - 2015
Editor: ELSEVIER, LTD.
https://doi.org/10.1016/j.proeng.2015.12.515 View at source
- ISBN 1877-705
Modeling of viscoelastoplastic behavior of Flax/PLA biodegradable composites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
2nd International Conference on Mechanics of Composites (MECHCOMP2 2016) (p. 111-111) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978-88-7488-963-1
Influence of tool geometry in drilling of CFRP
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
ECCM16: 16th European Conference on Composite Materials (p. 1-8) - 2014
Influence of the undeformed chip cross section in finishing turning of Inconel 718 with PCBN tools
- Infante Garcia, Diego
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Muñoz Sanchez, Ana
- Miguelez Garrido, Maria Henar
8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 122-125) - 2018
Editor: ELSEVIER
Implementation of a numerical model to define a bending manufacturing process
- Feito Sanchez, Norberto
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Rodriguez Millan, Marcos
- Lopez Puente, Jorge
- Diaz Alvarez, Jose
Especial Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning at the 22ndCUIEEET, Almadén, Ciudad Real (Spain) (p. 36-41) - 2014
Editor: Trans Tech Publications
https://doi.org/10.4028/www.scientific.net/msf.853.36 View at source
Impact and Compression after Impact (CAI) behavior of PLA/Flax biocomposites
- Rubio Lopez, Angel
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
2nd International Conference on Mechanics of Composites (MECHCOMP2 2016) (p. 111-111) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978-88-7488-963-1
Estimation of thermal effects in dry drilling of Ti6Al4V
- Diaz Alvarez, Antonio
- Cruz Hernandez, Jesus Alberto De La
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
Manufacturing Engineering Society International Conference (MESIC 2015) (p. 433-439) - 2015
Editor: ELSEVIER, LTD.
https://doi.org/10.1016/j.proeng.2015.12.516 View at source
- ISBN 1877-705
This researcher has no working papers.
This researcher has no technical reports.
Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 01-01-2012 - 31-12-2013
Type of funding: Regional
Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)
740560 - Enhanced Neutralisation of explosive Threats Reaching Across the Plot
- Miguelez Garrido, Maria Henar
- Carpintero Del Barrio, Guillermo
- Loya Lorenzo, Jose Antonio
- Armingol Moreno, Jose Maria
- Vera Coello, Marcos
- Garcia Fernandez, Fernando
- Rodriguez Millan, Marcos
- Aranda Ruiz, Josue
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
Period: 01-05-2017 - 31-10-2020
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
ROTORNEA-CM-UC3M - ESTUDIO Y DISEÑO DE HERRAMIENTAS DE CORTE PARA TORNEADO OBTENIDAS POR IMPRESIÓN 3D CON REFRIGERACIÓN INTERNA (ROTORNEA-CM-UC3M)
- Diaz Alvarez, Antonio
- Fernandez Torrijos, Maria
- Muñoz Sanchez, Ana
- Rodriguez Rodriguez, Francisco Javier
- Ruiz-rivas Hernando, Ulpiano
- Sanchez Gonzalez, Alberto
- Diaz Alvarez, Jose
Period: 01-01-2022 - 31-12-2023
Type of funding: Regional
Funding entity: COMUNIDAD DE MADRID
Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Hernandez Del Valle, Alejandro
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 26-05-2022 - 23-12-2022
Type of funding: International
Funding entity: AIRBUS OPERATIONS, S.L.
Drilling process improvement based on data analysis
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Martin Gomez, David
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Gomez Silva, Maria Jose
- Fernandez Perez, Juan
- Dominguez Monferrer, Carlos
- Armingol Robles, Ignacio
- Santos Garcia, Raul De
Period: 18-12-2019 - 31-12-2021
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
Drilling Processes Improvement for Multi Material CFRP-AL-TI Stacks
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Serrano Dieguez, Fernando
- Feito Sanchez, Norberto
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Fernandez Perez, Juan
Period: 04-04-2016 - 30-06-2019
Type of funding: Regional
Funding entity: AIRBUS DEFENCE AND SPACE S.A.U.
Drilling Process Improvement based on Data Analytics-STEP 3: tool breakage detection and countersinking height monitoring
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 04-07-2023 - 08-01-2024
Type of funding: National
Funding entity: AIRBUS OPERATIONS, S.L.
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Period: 18-06-2020 - 17-06-2023
Type of funding: Regional
Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES
PID2020-112628RA-I00 - Diseño Integral y Fabricación Aditiva de Implantes Poliméricos Patient-Specific
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Diaz Alvarez, Jose
- Santos Cuadros, Silvia
Period: 01-09-2021 - 31-08-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
PDC2021-121368- C21 - DIGITDRILL - Digitalization of industrial drilling process
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Antonio
Period: 01-12-2021 - 30-11-2023
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
This researcher has no patents or software licenses.
Researcher profiles
-
ORCID
-
Scopus Author ID