The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Diaz Alvarez, Jose jodiaz@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

Open Access

A new cutting device design to study the orthogonal cutting of CFRP laminates at different cutting speeds

  • Criado Del Alamo, Victor
  • Feito Sanchez, Norberto
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose

Materials - MDPI (p. 1-13) - 12/2019

https://doi.org/10.3390/ma12244074 View at source

  • ISSN 1996-1944

Additive Manufacturing and Mechanical Characterization of PLA-Based Skull Surrogates

  • Mantecon Padin, Ramiro
  • Marco Esteban, Miguel
  • Muñoz Sanchez, Ana
  • Youssef, George
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

Polymers - 12/2022

https://doi.org/10.3390/polym15010058 View at source

  • ISSN 2073-4360
Open Access

Analysis of orthogonal cutting of biocomposites

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos

COMPOSITE STRUCTURES (p. 1-14) - 2/2020

https://doi.org/10.1016/j.compstruct.2019.111734 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Analysis of tool wear patterns in finishing turning of Inconel 718

  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar
  • Marin Calvo, Nacari Del Carmen

WEAR (p. 885-894) - 1/2013

https://doi.org/10.1016/j.wear.2012.11.004 View at source

  • EISSN 1873-2577
  • ISSN 0043-1648
Open Access

Combined analysis of wear mechanisms and delamination in CFRP drilling

  • Fernandez Perez, Juan
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

COMPOSITE STRUCTURES (p. 1-10) - 1/2021

https://doi.org/10.1016/j.compstruct.2020.112774 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Drilling of biocomposite materials: Modelling and experimental validation

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Feito Sanchez, Norberto
  • Santiuste Romero, Carlos

SIMULATION MODELLING PRACTICE AND THEORY (p. 1-15) - 1/2021

https://doi.org/10.1016/j.simpat.2020.102203 View at source

  • EISSN 1878-1462
  • ISSN 1569-190X
Open Access

Experimental analysis for stabbing resistance of different aramid composite architectures

  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Antonio
  • Aranda Ruiz, Josue
  • Diaz Alvarez, Jose
  • Loya Lorenzo, Jose Antonio

COMPOSITE STRUCTURES (p. 525-534) - 1/2019

https://doi.org/10.1016/j.compstruct.2018.10.042 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Experimental analysis of drilling induced damage in aramid composites

  • Diaz Alvarez, Antonio
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 1136-1144) - 10/2018

https://doi.org/10.1016/j.compstruct.2018.05.068 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Experimental analysis of the influence of drill point angle and wear on the drilling of woven CFRPs

  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

Materials - MDPI (p. 4258-4271) - 5/2014

https://doi.org/10.3390/ma7064258 View at source

  • ISSN 1996-1944
Open Access

Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs

  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 1147-1155) - 1/2018

https://doi.org/10.1016/j.compstruct.2017.10.061 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

This researcher has no books.

Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics

  • Miguelez Garrido, Maria Henar
  • Feito Sanchez, Norberto
  • Santiuste Romero, Carlos
  • Diaz Alvarez, Jose
  • Rodriguez Millan, Marcos
  • Soldani, Xavier

Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015

Editor: DE GRUYTER

https://doi.org/10.1515/9783110292251-005 View at source

  • ISBN 9783110292251

3D numerical modelling of machining

  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Ahmed Ramadan, Mohamed
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

20th International Conference on Computer Methods in Mechanics - 2013

Open Access

ANÁLISIS DEL COMPORTAMIENTO MECÁNICO DEL MATERIAL PLA IMPRESO CON TÉCNICAS FDM

  • Mantecon Padin, Ramiro
  • Rufo Martin, Celia
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

37 Congreso del Grupo Español de Fractura GEF2021 (p. 193-198) - 2021

  • ISBN 2792-4246

Additive manufacturing for a Moon village

  • Labeaga Azcona, Jose Maria
  • Sanjurjo Rivo, Manuel
  • Diaz Alvarez, Jose
  • Martinez-frias, J.

7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 794-801) - 2017

Editor: ELSEVIER

https://doi.org/10.1016/j.promfg.2017.09.186 View at source

  • ISBN 2351-9789
Open Access

Additive manufacturing of head surrogates for impact analysis

  • Mantecon Padin, Ramiro
  • Rubio Diaz, Ignacio
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

EUROPEAN CONFERENCE ON FRACTURE ECF23. Fracture Mechanics and Structural Integrity (p. 395) - 2022

  • ISBN 9788831482189

Analysis of adiabatic shear banding in machining

  • Soldani, Xavier
  • Molinari, Alain Louis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

IUTAM Symposium on Materials and Interfaces Under High Strain Rate and Large Deformation<br/><br/> (p. 46) - 2013

Analysis of fretting fatigue behaviour of an aeroengine nickel-base alloy

  • Infante Garcia, Diego
  • Giner, E.
  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose

14th International Conference on Fracture (ICF 14) (p. 853-854) - 2017

Open Access

Analysis of machining performance of Inconel 718 printed by PBF-LM (powder bed fusion laser melting).

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Wood, Paul
  • Fowdar Gunputh, Urvashi
  • Bahi, Slim
  • Rusinek, Alexis
  • Miguelez Garrido, Maria Henar
... View more Collapse

XXIII Congreso Nacional Ingeniería Mecánica (CNIM 2020) - 2021

https://hdl.handle.net/10545/625323 View at source

Open Access

Calidad e integridad del componente en procesos de escariado de apilados híbridos

  • Fernandez Perez, Juan
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

XXII Congreso Nacional de Ingeniería Mecánica (CNIM) (p. 482) - 2018

Editor: UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA (UNED)

  • ISBN 0212-5072

Composite fiber reinforced plastic one-shoot drilling: quality inspection assessment and tool wear evaluation

  • Fernandez Perez, Jose Luis
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 139-145) - 2017

Editor: ELSEVIER

https://doi.org/10.1016/j.promfg.2017.09.021 View at source

  • ISBN 2351-9789

Countersink depth control in aeronautical structural components drilling processes by machining forces analysis

  • Guerra Sancho, Antonio
  • Fernandez Perez, Juan
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose

2022 8th International Engineering, Sciences and Technology Conference (IESTEC) (p. 715-722) - 2022

Editor: IEEE Press

10.1109/iestec54539.2022.00117 View at source

  • ISBN 978-1-6654-9843-2

This researcher has no working papers.

This researcher has no technical reports.

ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV

  • Loya Lorenzo, Jose Antonio
  • Rodriguez Millan, Marcos
  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Puerta Hueso, Sergio
  • Pedroche Arias, David
  • Diaz Alvarez, Jose
  • Wang, Liujiao
  • Valverde Marcos, Borja
  • Arevalo Fernandez, Carlos Martin
... View more Collapse

Period: 16-06-2022 - 15-06-2023

Type of funding: Regional

Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.

PID2020-118480RB-C22 - Análisis de defectos en laminados reforzados con fibras debidos a procesos de fabricación y efecto en el comportamiento a fatiga

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Diaz Alvarez, Jose

Period: 01-09-2021 - 31-08-2024

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

PDC2021-121368- C21 - DIGITDRILL - Digitalization of industrial drilling process

  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Antonio

Period: 01-12-2021 - 30-11-2023

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

PID2020-112628RA-I00 - Diseño Integral y Fabricación Aditiva de Implantes Poliméricos Patient-Specific

  • Diaz Alvarez, Antonio
  • Marco Esteban, Miguel
  • Diaz Alvarez, Jose
  • Santos Cuadros, Silvia

Period: 01-09-2021 - 31-08-2024

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)

  • Loya Lorenzo, Jose Antonio
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Isasi Sanchez, Luis
  • Santiuste Romero, Carlos
  • Puerta Hueso, Sergio
  • Pedroche Arias, David
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Marco Esteban, Miguel
  • Rubio Diaz, Ignacio
  • Infante Garcia, Diego
  • Miguelez Garrido, Beatriz
  • Mantecon Padin, Ramiro
  • Rufo Martin, Celia
  • Valverde Marcos, Borja
  • Alvarez Blanco, Mario
... View more Collapse

Period: 18-06-2020 - 17-06-2023

Type of funding: Regional

Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES

Drilling Process Improvement based on Data Analytics-STEP 3: tool breakage detection and countersinking height monitoring

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Dominguez Monferrer, Carlos
  • Ramajo Ballester, Alvaro
  • Guerra Sancho, Antonio
... View more Collapse

Period: 04-07-2023 - 08-01-2024

Type of funding: National

Funding entity: AIRBUS OPERATIONS, S.L.

Drilling Processes Improvement for Multi Material CFRP-AL-TI Stacks

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Serrano Dieguez, Fernando
  • Feito Sanchez, Norberto
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Marco Esteban, Miguel
  • Fernandez Perez, Juan
... View more Collapse

Period: 04-04-2016 - 30-06-2019

Type of funding: Regional

Funding entity: AIRBUS DEFENCE AND SPACE S.A.U.

Drilling process improvement based on data analysis

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Martin Gomez, David
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Gomez Silva, Maria Jose
  • Fernandez Perez, Juan
  • Dominguez Monferrer, Carlos
  • Armingol Robles, Ignacio
  • Santos Garcia, Raul De
... View more Collapse

Period: 18-12-2019 - 31-12-2021

Type of funding: Regional

Funding entity: AIRBUS OPERATIONS, S.L.

Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Dominguez Monferrer, Carlos
  • Hernandez Del Valle, Alejandro
  • Ramajo Ballester, Alvaro
  • Guerra Sancho, Antonio
... View more Collapse

Period: 26-05-2022 - 23-12-2022

Type of funding: International

Funding entity: AIRBUS OPERATIONS, S.L.

ROTORNEA-CM-UC3M - ESTUDIO Y DISEÑO DE HERRAMIENTAS DE CORTE PARA TORNEADO OBTENIDAS POR IMPRESIÓN 3D CON REFRIGERACIÓN INTERNA (ROTORNEA-CM-UC3M)

  • Diaz Alvarez, Antonio
  • Fernandez Torrijos, Maria
  • Muñoz Sanchez, Ana
  • Rodriguez Rodriguez, Francisco Javier
  • Ruiz-rivas Hernando, Ulpiano
  • Sanchez Gonzalez, Alberto
  • Diaz Alvarez, Jose
... View more Collapse

Period: 01-01-2022 - 31-12-2023

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID

Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte

  • Criado Del Alamo, Victor
  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis

2020

Reading date: 17-12-2020

Reading institution: Universidad Carlos III de Madrid

Pirómetro de fibra óptica a dos colores

  • Vazquez Garcia, Maria Carmen
  • Tapetado Moraleda, Alberto
  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose

21/7/2017

Date filed: 22-04-2015

Date issued: 21-07-2017

Last data update: 4/8/24 9:02 PM