The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Diaz Alvarez, Jose jodiaz@ing.uc3m.es
Publications
- Articles 32
- Books 0
- Book chapters 1
- Conferences 27
- Working papers 0
- Technical reports 0
- Research projects 17
- Supervised theses 1
- Patent or software license 1
Analysis of tool wear patterns in finishing turning of Inconel 718
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
- Marin Calvo, Nacari Del Carmen
WEAR (p. 885-894) - 1/2013
https://doi.org/10.1016/j.wear.2012.11.004 View at source
- EISSN 1873-2577
- ISSN 0043-1648
Relevant factors affecting the direction of crack propagation in complete contact problems under fretting fatigue
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Diaz Alvarez, Jose
- Giner, Eugenio
Tribology International (p. 343-352) - 3/2019
10.1016/j.triboint.2018.10.048 View at source
- EISSN 1879-2464
- ISSN 0301-679X
Temperature Measurement and Numerical Prediction in Machining Inconel 718
- Diaz Alvarez, Jose
- Tapetado Moraleda, Alberto
- Vazquez Garcia, Maria Carmen
- Miguelez Garrido, Maria Henar
Sensors - 6/2017
https://doi.org/10.3390/s17071531 View at source
- EISSN 1424-8220
- ISSN 1424-3210
Drilling of biocomposite materials: Modelling and experimental validation
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
SIMULATION MODELLING PRACTICE AND THEORY (p. 1-15) - 1/2021
https://doi.org/10.1016/j.simpat.2020.102203 View at source
- EISSN 1878-1462
- ISSN 1569-190X
Experimental assessment of thermal gradients and layout effects on the mechanical performance of components manufactured by fused deposition modeling
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Castellanos Garcia De Blas, Rodrigo
- Diaz Alvarez, Jose
RAPID PROTOTYPING JOURNAL - 4/2022
10.1108/rpj-12-2021-0329 View at source
- ISSN 1355-2546
Additive Manufacturing and Mechanical Characterization of PLA-Based Skull Surrogates
- Mantecon Padin, Ramiro
- Marco Esteban, Miguel
- Muñoz Sanchez, Ana
- Youssef, George
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
Polymers - 12/2022
https://doi.org/10.3390/polym15010058 View at source
- ISSN 2073-4360
PCBN Performance in High Speed Finishing Turning of Inconel 718
- Diaz Alvarez, Jose
- Criado Del Alamo, Victor
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Metals - 7/2018
10.3390/met8080582 View at source
- ISSN 2075-4701
High Speed Finish Turning of Inconel 718 Using PCBN Tools under Dry Conditions
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Infante Garcia, Diego
- Rodriguez Millan, Marcos
- Criado Del Alamo, Victor
Metals - 3/2018
10.3390/met8030192 View at source
- ISSN 2075-4701
Finishing turning of Ni superalloy Haynes 282
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
Metals (p. 1-12) - 10/2018
https://doi.org/10.3390/met8100843 View at source
- ISSN 2075-4701
High-pressure cooling in finishing turning of haynes 282 using carbide tools: Haynes 282 and inconel 718 comparison
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
Metals (p. 1-20) - 11/2021
https://doi.org/10.3390/met11121916 View at source
- ISSN 2075-4701
This researcher has no books.
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Damage prediction in composite milling
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Feito Sanchez, Norberto
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
IV ECCOMAS Thematic Conference on the Mechanical Response of Composites (COMPOSITES2013) - 2013
Analysis of adiabatic shear banding in machining
- Soldani, Xavier
- Molinari, Alain Louis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
IUTAM Symposium on Materials and Interfaces Under High Strain Rate and Large Deformation<br/><br/> (p. 46) - 2013
Implementation of a numerical model to define a bending manufacturing process
- Feito Sanchez, Norberto
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Rodriguez Millan, Marcos
- Lopez Puente, Jorge
- Diaz Alvarez, Jose
Especial Symposium on New Frontiers in Materials Processing and Manufacturing Engineering Training and Learning at the 22ndCUIEEET, Almadén, Ciudad Real (Spain) (p. 36-41) - 2014
Editor: Trans Tech Publications
https://doi.org/10.4028/www.scientific.net/msf.853.36 View at source
Additive manufacturing of head surrogates for impact analysis
- Mantecon Padin, Ramiro
- Rubio Diaz, Ignacio
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
EUROPEAN CONFERENCE ON FRACTURE ECF23. Fracture Mechanics and Structural Integrity (p. 395) - 2022
- ISBN 9788831482189
Influence of tool geometry in drilling of CFRP
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Cantero Guisandez, Jose Luis
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
ECCM16: 16th European Conference on Composite Materials (p. 1-8) - 2014
Tool wear and induced damage in CFRP drilling with step and double point angle drill bits
- Fernandez Perez, Juan
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
8th Manufacturing Engineering Society International Conference, MESIC 2019 (p. 610-617) - 2019
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2019.09.049 View at source
- ISBN 2351-9789
Study of the performance of PCBN and carbide tools in finishing machining of Inconel 718 with cutting fluid at conventional pressures
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
8th CIRP Conference on High Performance Cutting (HPC 2018) (p. 634-637) - 2018
Editor: ELSEVIER
https://doi.org/10.1016/j.procir.2018.08.189 View at source
- ISBN 2212-8271
Additive manufacturing for a Moon village
- Labeaga Azcona, Jose Maria
- Sanjurjo Rivo, Manuel
- Diaz Alvarez, Jose
- Martinez-frias, J.
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 794-801) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.186 View at source
- ISBN 2351-9789
Composite fiber reinforced plastic one-shoot drilling: quality inspection assessment and tool wear evaluation
- Fernandez Perez, Jose Luis
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Jose
- Miguelez Garrido, Maria Henar
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 139-145) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.021 View at source
- ISBN 2351-9789
Numerical modeling of instabilities during machining of aeronautical alloy
- Soldani, Xavier
- Lopez-galvez Muñoz, Hector
- Diaz Alvarez, Jose
7th Manufacturing Engineering Society International Conference (MESIC2017) (p. 36-42) - 2017
Editor: ELSEVIER
https://doi.org/10.1016/j.promfg.2017.09.006 View at source
- ISBN 2351-9789
This researcher has no working papers.
This researcher has no technical reports.
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Period: 16-06-2022 - 15-06-2023
Type of funding: Regional
Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.
Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 01-01-2012 - 31-12-2013
Type of funding: Regional
Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)
PDC2021-121368- C21 - DIGITDRILL - Digitalization of industrial drilling process
- Miguelez Garrido, Maria Henar
- Diaz Alvarez, Jose
- Muñoz Sanchez, Ana
- Cantero Guisandez, Jose Luis
- Diaz Alvarez, Antonio
Period: 01-12-2021 - 30-11-2023
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Drilling Processes Improvement for Multi Material CFRP-AL-TI Stacks
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Serrano Dieguez, Fernando
- Feito Sanchez, Norberto
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Fernandez Perez, Juan
Period: 04-04-2016 - 30-06-2019
Type of funding: Regional
Funding entity: AIRBUS DEFENCE AND SPACE S.A.U.
740560 - Enhanced Neutralisation of explosive Threats Reaching Across the Plot
- Miguelez Garrido, Maria Henar
- Carpintero Del Barrio, Guillermo
- Loya Lorenzo, Jose Antonio
- Armingol Moreno, Jose Maria
- Vera Coello, Marcos
- Garcia Fernandez, Fernando
- Rodriguez Millan, Marcos
- Aranda Ruiz, Josue
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
Period: 01-05-2017 - 31-10-2020
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
DPI2011-25999 - Modelización del proceso de taladrado de materiales compuestos de fibra de carbono
- Miguelez Garrido, Maria Henar
- Muñoz Sanchez, Ana
- Gonzalez Farias, Isabel Marina
- Canteli Fernandez, Jose Antonio
- Cantero Guisandez, Jose Luis
- De La Cruz Hernandez, Jesus Alberto
- Soldani, Xavier
- Feito Sanchez, Norberto
- Diaz Alvarez, Jose
Period: 01-01-2012 - 31-12-2014
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
Gemelos digitales para el diseño biomecánico avanzado de protecciones de cabeza en deportes con riesgo de impacto
- Miguelez Garrido, Maria Henar
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Belda Gonzalez, Ricardo
Period: 24-03-2023 - 30-11-2023
Type of funding: National
Funding entity: CONSEJO SUPERIOR DE DEPORTES
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Period: 18-06-2020 - 17-06-2023
Type of funding: Regional
Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES
Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
- Armingol Moreno, Jose Maria
- Isasi Sanchez, Luis
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Dominguez Monferrer, Carlos
- Hernandez Del Valle, Alejandro
- Ramajo Ballester, Alvaro
- Guerra Sancho, Antonio
Period: 26-05-2022 - 23-12-2022
Type of funding: International
Funding entity: AIRBUS OPERATIONS, S.L.
ROTORNEA-CM-UC3M - ESTUDIO Y DISEÑO DE HERRAMIENTAS DE CORTE PARA TORNEADO OBTENIDAS POR IMPRESIÓN 3D CON REFRIGERACIÓN INTERNA (ROTORNEA-CM-UC3M)
- Diaz Alvarez, Antonio
- Fernandez Torrijos, Maria
- Muñoz Sanchez, Ana
- Rodriguez Rodriguez, Francisco Javier
- Ruiz-rivas Hernando, Ulpiano
- Sanchez Gonzalez, Alberto
- Diaz Alvarez, Jose
Period: 01-01-2022 - 31-12-2023
Type of funding: Regional
Funding entity: COMUNIDAD DE MADRID
Estudio experimental y numérico del torneado de inconel 718 con herramientas PCBN en condiciones de acabado a alta velocidad de corte
- Criado Del Alamo, Victor
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
2020
Reading date: 17-12-2020
Reading institution: Universidad Carlos III de Madrid
Researcher profiles
-
ORCID
-
Web of Science ResearcherID
-
Scopus Author ID