The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Miguelez Garrido, Maria Henar mhmiguel@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

Open Access

Numerical Modelling of Femur Fracture and Experimental Validation Using Bone Simulant

  • Marco Esteban, Miguel
  • Giner, Eugenio
  • Larraínzar Garijo, Ricardo
  • Ramón Cariro, Jose
  • Miguelez Garrido, Maria Henar

ANNALS OF BIOMEDICAL ENGINEERING (p. 2395-2408) - 10/2017

https://doi.org/10.1007/s10439-017-1877-6 View at source

  • EISSN 1521-6047
  • ISSN 0090-6964

Effect of powder bed fusion laser melting process parameters, build orientation and strut thickness on porosity, accuracy and tensile properties of an auxetic structure in IN718 alloy

  • Delcuse, L.
  • Bahi, S.
  • Gunputh, U.
  • Rusinek, Alexis
  • Wood, P.
  • Miguelez Garrido, Maria Henar

Additive Manufacturing (p. 1-14) - 12/2020

https://doi.org/10.1016/j.addma.2020.101339 View at source

  • ISSN 2214-8604
Open Access

Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites

  • Diaz Alvarez, Antonio
  • Diaz Alvarez, Jose
  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 700-709) - 2/2019

https://doi.org/10.1016/j.compstruct.2018.11.018 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Modeling the delamination failure under compressive loads in CFRP laminates based on digital image correlation analysis

  • Calvo Orozco, Jose Vicente
  • Feito Sanchez, Norberto
  • Miguelez Garrido, Maria Henar
  • Giner, Eugenio

COMPOSITE STRUCTURES (p. 1-12) - 5/2022

https://doi.org/10.1016/j.compstruct.2022.115265 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Out-of-plane failure mechanisms in LFRP composite cutting

  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar
  • Soldani, Xavier

COMPOSITE STRUCTURES (p. 2706-2713) - 10/2011

https://doi.org/10.1016/j.compstruct.2011.05.034 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

The influence of anisotropy in numerical modeling of orthogonal cutting of cortical bone

  • Santiuste Romero, Carlos
  • Rodriguez Millan, Marcos
  • Giner, E.
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 423-431) - 10/2014

https://doi.org/10.1016/j.compstruct.2014.05.031 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs

  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 1147-1155) - 1/2018

https://doi.org/10.1016/j.compstruct.2017.10.061 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Machining FEM Model of Long Fiber Composites for Aeronautical Component

  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar
  • Soldani, Xavier

COMPOSITE STRUCTURES (p. 691-698) - 2/2010

https://doi.org/10.1016/j.compstruct.2009.09.021 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Numerical analysis of the influence of tool wear and special cutting geometry when drilling woven CFRPs

  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 285-294) - 3/2016

https://doi.org/10.1016/j.compstruct.2015.11.065 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Numerical prediction of delamination in CFRP drilling

  • Feito Sanchez, Norberto
  • Lopez Puente, Jorge
  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 677-683) - 2/2014

https://doi.org/10.1016/j.compstruct.2013.10.014 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Metodología de elaboración de Trabajos de Fin de Grado y Postgrado relacionados con líneas de investigación de interés para la Guardia Civil

  • Moure Colon, Fernando
  • Rodriguez Millan, Marcos
  • Miguelez Garrido, Maria Henar

2015

Editor: CENTRO UNIVERSITARIO DE LA GUARDIA CIVIL

  • ISBN 978-84-943219-1-7

Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites

  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

Fiber-Reinforced Composites (p. 497-526) - 10/2012

Editor: NOVA SCIENCE PUBLISHERS INC

  • ISBN 978-1-61470-433-1

Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics

  • Miguelez Garrido, Maria Henar
  • Feito Sanchez, Norberto
  • Santiuste Romero, Carlos
  • Diaz Alvarez, Jose
  • Rodriguez Millan, Marcos
  • Soldani, Xavier

Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015

Editor: DE GRUYTER

https://doi.org/10.1515/9783110292251-005 View at source

  • ISBN 9783110292251

Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites

  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Loya Lorenzo, Jose Antonio

Wiley Encyclopedia of Composites (p. 1-14) - 7/2012

Editor: WILEY

https://doi.org/10.1002/9781118097298.weoc200 View at source

  • ISBN 978-1-11-809729-8
Open Access

High speed machining of Nickel-based alloys (HRSA) with CBN tools

  • Criado Del Alamo, Victor
  • Muñoz Vazquez, Victorio
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

13th High Speed Machining Conference (HSM 2016). Progress in Productivity and Quality - 2016

Experimental and numerical analysis of hip fracture morphology

  • Marco Esteban, Miguel
  • Giner, E.
  • Larrainzar, R.
  • Caeiro, J.r.
  • Miguelez Garrido, Maria Henar

14th International Conference on Fracture (ICF 14) (p. 840-841) - 2017

Analysis of fretting fatigue behaviour of an aeroengine nickel-base alloy

  • Infante Garcia, Diego
  • Giner, E.
  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose

14th International Conference on Fracture (ICF 14) (p. 853-854) - 2017

Numerical modeling of composite cutting including thermal effects

  • Santiuste Romero, Carlos
  • Diaz Alvarez, Jose
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

17th International Conference on Composite Structures (ICCS17) - 2013

Numerical Modeling of Delamination during Machining of LFRP Composites

  • Soldani, Xavier
  • Santiuste Romero, Carlos
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

18th International Conference on Composite Materials (ICCM18) - 2011

Very localized temperature measurements and applications using optical fiber pyrometers

  • Vazquez Varela, Carmen
  • Nuñez, A.
  • Tapetado Moraleda, Alberto
  • Miguelez Garrido, Maria Henar

2019 21st International Conference on Transparent Optical Networks (ICTON) (p. 1-4) - 2019

Editor: IEEE.THE INSTITUTE OF ELECTRICAL AND ELECTRONICS ENGINEERS, INC

10.1109/icton.2019.8840361 View at source

  • ISBN 978-1-7281-2780-4

Countersink depth control in aeronautical structural components drilling processes by machining forces analysis

  • Guerra Sancho, Antonio
  • Fernandez Perez, Juan
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Diaz Alvarez, Jose

2022 8th International Engineering, Sciences and Technology Conference (IESTEC) (p. 715-722) - 2022

Editor: IEEE Press

10.1109/iestec54539.2022.00117 View at source

  • ISBN 978-1-6654-9843-2
Open Access

Statistical and numerical analysis of wear tool geometry in drilling CFRP

  • Feito Sanchez, Norberto
  • Muñoz Sanchez, Ana
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

20th International Conference on Composite Materials (ICCM20) (p. 1-10) - 2015

3D numerical modelling of machining

  • Diaz Alvarez, Jose
  • Cantero Guisandez, Jose Luis
  • Ahmed Ramadan, Mohamed
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

20th International Conference on Computer Methods in Mechanics - 2013

Open Access

Mechanical behaviour of specimens made via fused deposition modelling under three-point bending

  • Alvarez Blanco, Mario
  • Arias Blanco, Adrian
  • Marco Esteban, Miguel
  • Infante Garcia, Diego
  • Giner Maravilla, Eugenio
  • Miguelez Garrido, Maria Henar

23rd European Conference on Fracture (ECF23) (p. 312-312) - 2022

  • ISBN 9788831482189

This researcher has no working papers.

This researcher has no technical reports.

RTC-2015-3887-8 - Diseño avanzado y fabricación de protecciones personales integrales de uso militar y para Fuerzas y Cuerpos de Seguridad del Estado (PROTEC_DAF)

  • Miguelez Garrido, Maria Henar
  • Loya Lorenzo, Jose Antonio
  • Santiuste Romero, Carlos
  • Rodriguez Millan, Marcos

Period: 25-02-2015 - 31-03-2019

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

740560 - Enhanced Neutralisation of explosive Threats Reaching Across the Plot

  • Miguelez Garrido, Maria Henar
  • Carpintero Del Barrio, Guillermo
  • Loya Lorenzo, Jose Antonio
  • Armingol Moreno, Jose Maria
  • Vera Coello, Marcos
  • Garcia Fernandez, Fernando
  • Rodriguez Millan, Marcos
  • Aranda Ruiz, Josue
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Marco Esteban, Miguel
  • Infante Garcia, Diego
  • Miguelez Garrido, Beatriz
... View more Collapse

Period: 01-05-2017 - 31-10-2020

Type of funding: European

Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY

Drilling process improvement based on data analysis step 2 (Drilling Digitalization: Data analytics + AI for Drilling Process Improvement)

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Dominguez Monferrer, Carlos
  • Hernandez Del Valle, Alejandro
  • Ramajo Ballester, Alvaro
  • Guerra Sancho, Antonio
... View more Collapse

Period: 26-05-2022 - 23-12-2022

Type of funding: International

Funding entity: AIRBUS OPERATIONS, S.L.

ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV

  • Loya Lorenzo, Jose Antonio
  • Rodriguez Millan, Marcos
  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Puerta Hueso, Sergio
  • Pedroche Arias, David
  • Diaz Alvarez, Jose
  • Wang, Liujiao
  • Valverde Marcos, Borja
  • Arevalo Fernandez, Carlos Martin
... View more Collapse

Period: 16-06-2022 - 15-06-2023

Type of funding: Regional

Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.

CCG07-UC3M/DPI-3396 - Predicción de tensiones residuales y desgaste de herramienta en procesos de corte ortogonal, mediante simulación numérica

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Cantero Guisandez, Jose Luis
  • Muñoz Abella, Maria Belen
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
... View more Collapse

Period: 01-01-2008 - 31-12-2008

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

CS-GA-2013-632434 - CRASHING: Characterization of Structural Behaviour for High Frequency Phenomena

  • Claudio Lopes (Investigador principal (IP))
  • MOLINA ALDAREGUIA, Jon Mikel (Investigador/a)

Period: 01-04-2014 - 30-09-2016

Type of funding: European

Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY

Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)

  • Loya Lorenzo, Jose Antonio
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Isasi Sanchez, Luis
  • Santiuste Romero, Carlos
  • Puerta Hueso, Sergio
  • Pedroche Arias, David
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Marco Esteban, Miguel
  • Rubio Diaz, Ignacio
  • Infante Garcia, Diego
  • Miguelez Garrido, Beatriz
  • Mantecon Padin, Ramiro
  • Rufo Martin, Celia
  • Valverde Marcos, Borja
  • Alvarez Blanco, Mario
... View more Collapse

Period: 18-06-2020 - 17-06-2023

Type of funding: Regional

Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES

CCG08-UC3M/DPI-4494 - CP08: Taladro en seco de la aleación Ti6Al4V: Análisis del daño térmico y del desgaste de herramientas mediante técnicas experimentales y simulación numérica

  • Cantero Guisandez, Jose Luis
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Muñoz Abella, Maria Belen
  • Miguelez Garrido, Maria Henar
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
  • Soldani, Xavier
... View more Collapse

Period: 01-01-2009 - 31-12-2009

Funding entity: COMUNIDAD DE MADRID-UC3M

Drilling process improvement based on data analysis

  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar
  • Armingol Moreno, Jose Maria
  • Isasi Sanchez, Luis
  • Martin Gomez, David
  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Gomez Silva, Maria Jose
  • Fernandez Perez, Juan
  • Dominguez Monferrer, Carlos
  • Armingol Robles, Ignacio
  • Santos Garcia, Raul De
... View more Collapse

Period: 18-12-2019 - 31-12-2021

Type of funding: Regional

Funding entity: AIRBUS OPERATIONS, S.L.

Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Loya Lorenzo, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Cheriguene, Rachid
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose
  • Soldani, Xavier
... View more Collapse

Period: 05-03-2009 - 20-05-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

Análisis experimental y numérico del taladrado de<br/> materiales compuestos .

  • Diaz Alvarez, Antonio
  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos

Reading date: 24-11-2017

Modelización de la evolución del desgaste en herramientas de corte

  • Miguelez Garrido, Maria Henar
  • Ramirez Paredes, Fernando
  • Soldani, Xavier

Reading date: 08-10-2015

Reading institution: CAMPUS DE LEGANES

Análisis experimental y numérico de la fractura de<br/> fémur humano

  • Marco Esteban, Miguel
  • Miguelez Garrido, Maria Henar
  • Giner Maravilla, Eugenio

Reading date: 27-01-2017

Formulación de un algoritmo eficiente de integración de un modelo de daño isótropo y validación en condiciones dinámicas

  • Marino Romero, Javier
  • Miguelez Garrido, Maria Henar

Reading date: 04-02-2016

Drilling processes improvement for multi material CFRP-AL-TI stacks

  • Fernandez Perez, Juan
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Reading date: 18-12-2020

Analysis of relevant factors affecting fretting fatigue behaviour of aeronautical alloys

  • Infante Garcia, Diego
  • Miguelez Garrido, Maria Henar
  • Giner Maravilla, Eugenio

Reading date: 11-12-2020

Análisis Experimental y Numérico del Proceso de Taladrado de Materiales Compuestos de Fibra de Carbono

  • Feito Sanchez, Norberto
  • Miguelez Garrido, Maria Henar

Reading date: 11-07-2016

Reading institution: CAMPUS DE LEGANES

Análisis experimental y numérico de las tensiones residuales debidas a mecanizado en aceros inoxidables austeníticos

  • Canteli Fernandez, Jose Antonio
  • Muñoz Sanchez, Ana
  • Miguelez Garrido, Maria Henar

Reading date: 09-12-2008

Reading institution: CAMPUS DE LEGANES

Estudio Numérico de los Fenómenos de Contacto en el Mecanizado

  • Cheriguene, Rachid
  • Molinari, Alain Louis
  • Miguelez Garrido, Maria Henar

Reading date: 09-12-2009

Pirómetro de fibra óptica a dos colores

  • Vazquez Garcia, Maria Carmen
  • Tapetado Moraleda, Alberto
  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose

21/7/2017

Date filed: 22-04-2015

Date issued: 21-07-2017

Last data update: 4/8/24 9:02 PM