The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Miguelez Garrido, Maria Henar mhmiguel@ing.uc3m.es

Ingeniería Mecánica / Universidad Carlos III de Madrid

Publications

Open Access

Effect of full helmet systems on human head responses under blast loading

  • Rodriguez Millan, Marcos
  • Tan, L.b.
  • Tse, K.m.
  • Lee, H.p.
  • Miguelez Garrido, Maria Henar

MATERIALS & DESIGN (p. 58-71) - 3/2017

https://doi.org/10.1016/j.matdes.2016.12.081 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275
Open Access

Fiber-Optic Pyrometer for Very Localized Temperature Measurements in a Turning Process

  • Tapetado Moraleda, Alberto
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar
  • Vazquez Garcia, Maria Carmen

IEEE JOURNAL OF SELECTED TOPICS IN QUANTUM ELECTRONICS (p. 5601306-1-5601306-6) - 3/2017

https://doi.org/10.1109/jstqe.2016.2627553 View at source

  • EISSN 1558-4542
  • ISSN 1077-260X
Open Access

Temperature Measurement and Numerical Prediction in Machining Inconel 718

  • Diaz Alvarez, Jose
  • Tapetado Moraleda, Alberto
  • Vazquez Garcia, Maria Carmen
  • Miguelez Garrido, Maria Henar

Sensors - 6/2017

https://doi.org/10.3390/s17071531 View at source

  • EISSN 1424-8220
  • ISSN 1424-3210
Open Access

Experimental and numerical analysis of step drill bit performance when drilling woven CFRPs

  • Feito Sanchez, Norberto
  • Diaz Alvarez, Jose
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 1147-1155) - 1/2018

https://doi.org/10.1016/j.compstruct.2017.10.061 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Relevant factors in the design of composite ballistic helmets

  • Palomar, Marta
  • Lozano, Estivaliz
  • Rodriguez Millan, Marcos
  • Miguelez Garrido, Maria Henar
  • Giner, Eugenio

COMPOSITE STRUCTURES (p. 49-61) - 10/2018

10.1016/j.compstruct.2018.05.076 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Finishing turning of Ni superalloy Haynes 282

  • Diaz Alvarez, Jose
  • Diaz Alvarez, Antonio
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Metals (p. 1-12) - 10/2018

https://doi.org/10.3390/met8100843 View at source

  • ISSN 2075-4701
Open Access

Experimental analysis of drilling induced damage in aramid composites

  • Diaz Alvarez, Antonio
  • Rodriguez Millan, Marcos
  • Diaz Alvarez, Jose
  • Miguelez Garrido, Maria Henar

COMPOSITE STRUCTURES (p. 1136-1144) - 10/2018

https://doi.org/10.1016/j.compstruct.2018.05.068 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Experimental analysis of drilling induced damage in biocomposites

  • Diaz Alvarez, Antonio
  • Rubio Lopez, Angel
  • Santiuste Romero, Carlos
  • Miguelez Garrido, Maria Henar

TEXTILE RESEARCH JOURNAL (p. 2544-2558) - 11/2018

10.1177/0040517517725118 View at source

  • ISSN 0040-5175
Open Access

Modelling of femur fracture using finite element procedures

  • Marco Esteban, Miguel
  • Giner, Eugenio
  • Larraínzar Garijo, Ricardo
  • Caeiro, Jose Ramon
  • Miguelez Garrido, Maria Henar

ENGINEERING FRACTURE MECHANICS - 6/2018

10.1016/j.engfracmech.2018.04.024 View at source

  • EISSN 1873-7315
  • ISSN 0013-7944
Open Access

A heterogeneous orientation criterion for crack modelling in cortical bone using a phantom-node approach

  • Marco Esteban, Miguel
  • Belda Gonzalez, Ricardo
  • Miguelez Garrido, Maria Henar
  • Giner, Eugenio

FINITE ELEMENTS IN ANALYSIS AND DESIGN (p. 107-117) - 7/2018

10.1016/j.finel.2018.04.009 View at source

  • EISSN 1872-6925
  • ISSN 0168-874X

Metodología de elaboración de Trabajos de Fin de Grado y Postgrado relacionados con líneas de investigación de interés para la Guardia Civil

  • Moure Colon, Fernando
  • Rodriguez Millan, Marcos
  • Miguelez Garrido, Maria Henar

2015

Editor: CENTRO UNIVERSITARIO DE LA GUARDIA CIVIL

  • ISBN 978-84-943219-1-7

Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites

  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Lopez Puente, Jorge
  • Miguelez Garrido, Maria Henar

Fiber-Reinforced Composites (p. 497-526) - 10/2012

Editor: NOVA SCIENCE PUBLISHERS INC

  • ISBN 978-1-61470-433-1

Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites

  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Loya Lorenzo, Jose Antonio

Wiley Encyclopedia of Composites (p. 1-14) - 7/2012

Editor: WILEY

https://doi.org/10.1002/9781118097298.weoc200 View at source

  • ISBN 978-1-11-809729-8

Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics

  • Miguelez Garrido, Maria Henar
  • Feito Sanchez, Norberto
  • Santiuste Romero, Carlos
  • Diaz Alvarez, Jose
  • Rodriguez Millan, Marcos
  • Soldani, Xavier

Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015

Editor: DE GRUYTER

https://doi.org/10.1515/9783110292251-005 View at source

  • ISBN 9783110292251

Numerical Prediction of Residual Stresses after Machining

  • Miguelez Garrido, Maria Henar
  • Zaera Polo, Ramon Eulalio
  • Muñoz Sanchez, Ana
  • Molinari, Alain Louis

Workshop \"Dynamic Fracture and Damage of Brittle and Ductile Materials and Its Industrial Applications\" - 2008

The Influence of Cutting Speed on the Residual Stresses after Machining

  • Miguelez Garrido, Maria Henar
  • Zaera Polo, Ramon Eulalio
  • Molinari, Alain Louis
  • Muñoz Sanchez, Ana

Workshop on Dynamic Fracture and Damage of Brittle and Ductile Materials and its Industrial Applications - 2008

ANN Approach for Modelling Orthogonal Cutting

  • Gonzalez Farias, Isabel Marina
  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana

36th Solid Mechanics Conference - 2008

Manufacturing Process Definition as a Basic Teaching Tool in the EHEA

  • Gonzalez Farias, Isabel Marina
  • Cantero Guisandez, Jose Luis
  • Canteli Fernandez, Jose Antonio
  • Miguelez Garrido, Maria Henar

XVI Congreso Universitario de innovación educativa de las enseñanzas técnicas (CUIEET2008) - 2008

Teaching Strategy in Numerical Modelling of Metal Forming Processes

  • Miguelez Garrido, Maria Henar
  • Marin Calvo, Nacari Del Carmen
  • Muñoz Sanchez, Ana
  • Cantero Guisandez, Jose Luis

XVI Congreso universitario de innovación educativa en las enseñanzas técnicas - 2008

Lagrangian and ALE approach for predicting residual stresses in orthogonal cutting

  • Marin Calvo, Nacari Del Carmen
  • Miguelez Garrido, Maria Henar
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis

36th Solid Mechanics Conference - 2008

Numerical Modeling of Post-Processing of Composite Materials

  • Soldani, Xavier
  • Santiuste Romero, Carlos
  • Loya Lorenzo, Jose Antonio
  • Miguelez Garrido, Maria Henar

2nd Special Symposium on New Frontiers in Materials Processing Training and Learning (p. 93-98) - 7/2011

https://doi.org/10.4028/www.scientific.net/msf.692.93 View at source

  • EISSN 1662-9752
  • ISBN 978-3-03785-206-4
  • ISSN 0255-5476

Three-dimensional modeling of machining processes

  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos
  • Diaz Garcia, Jose Alberto
  • Soldani, Xavier
  • Cantero Guisandez, Jose Luis

4th Manufacturing Engineering Society International Conference (MESIC 2011) = 4º Congreso Internacional de la Sociedad de Ingeniería de Fabricación (p. 255-260) - 2011

Editor: Trans Tech Publications Ltd.

https://doi.org/10.4028/www.scientific.net/amr.498.255 View at source

  • ISBN 1022-6680

FE Modeling of Orthogonal Cutting of LFRP Composites

  • Santiuste Romero, Carlos
  • Soldani, Xavier
  • Miguelez Garrido, Maria Henar

XI International Conference on Computational Plasticity (COMPLAS XI): Fundamentals and Applications - 2011

Numerical Modeling of Delamination during Machining of LFRP Composites

  • Soldani, Xavier
  • Santiuste Romero, Carlos
  • Cantero Guisandez, Jose Luis
  • Miguelez Garrido, Maria Henar

18th International Conference on Composite Materials (ICCM18) - 2011

This researcher has no working papers.

This researcher has no technical reports.

Proyecto de Sensorización del Simulador de Vuelo del Helicóptero SA-350-B2 de la DGT

  • Miguelez Garrido, Maria Henar
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Pulido Dominguez, Agustin
  • Serrano Dieguez, Fernando
  • Sanz Diaz, Raul
  • Peña Rodriguez, Jesus
... View more Collapse

Period: 27-02-2006 - 30-06-2006

Type of funding: Regional

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

UC3M-IME-05-025 - Modelización numérica de los procesos de mecanizado y validación experimental

  • Miguelez Garrido, Maria Henar
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
... View more Collapse

Period: 01-01-2006 - 31-12-2006

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

Evaluación de Proyectos I+D+i

  • Miguelez Garrido, Maria Henar

Period: 11-09-2006 - 11-09-2007

Funding entity: FUNDACION UNIVERSIDAD CARLOS III,

INNOVACIÓN EN COMPOSITES AVANZADOS Y REAR-END OPTIMIZADO (ICARO)

  • J.M. López
  • E. Barrera
  • M. Ruiz
  • G. de Arcas (Investigador principal (IP))
  • Barrera López de Turiso, Eduardo (Investigador/a)

Period: 01-01-2008 - 31-12-2011

Type of funding: Regional

Funding entity: AERNNOVA ENGINEERING SOLUTIONS S.A.

CCG07-UC3M/DPI-3396 - Predicción de tensiones residuales y desgaste de herramienta en procesos de corte ortogonal, mediante simulación numérica

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Cantero Guisandez, Jose Luis
  • Muñoz Abella, Maria Belen
  • Rubio Ruiz De Aguirre, Maria Lourdes
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
... View more Collapse

Period: 01-01-2008 - 31-12-2008

Type of funding: Regional

Funding entity: COMUNIDAD DE MADRID-UC3M

CCG08-UC3M/DPI-4494 - CP08: Taladro en seco de la aleación Ti6Al4V: Análisis del daño térmico y del desgaste de herramientas mediante técnicas experimentales y simulación numérica

  • Cantero Guisandez, Jose Luis
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Muñoz Abella, Maria Belen
  • Miguelez Garrido, Maria Henar
  • Cheriguene, Rachid
  • Marin Calvo, Nacari Del Carmen
  • Loaiza Santoya, Gustavo Adolfo
  • Soldani, Xavier
... View more Collapse

Period: 01-01-2009 - 31-12-2009

Funding entity: COMUNIDAD DE MADRID-UC3M

DPI2008-06746 - Modelización numérica e integridad superficial en el torneado en seco de Inconel 718

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Gonzalez Farias, Isabel Marina
  • Canteli Fernandez, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Soldani, Xavier

Period: 01-01-2009 - 31-03-2012

Type of funding: National

Funding entity: MINISTERIO DE CIENCIA E INNOVACION

Proyecto de diseño y construcción de los mecanismos de acoplamiento para el doble mando del simulador de vuelo del helicóptero AS-355-NP de la DGT.

  • Miguelez Garrido, Maria Henar
  • Muñoz Sanchez, Ana
  • Loya Lorenzo, Jose Antonio
  • Cantero Guisandez, Jose Luis
  • Santiuste Romero, Carlos
  • Cheriguene, Rachid
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose
  • Soldani, Xavier
... View more Collapse

Period: 05-03-2009 - 20-05-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

Fabricación de 2 embellecedores de chapa con cubre polvo para los mandos colectivo y suministros de 2 tiradores para piloto y copiloto

  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis
  • Puerta Hueso, Sergio
  • Puerta Del Nuevo, Jose

Period: 15-10-2009 - 16-11-2009

Funding entity: FCC INDUSTRIAL E INFRAESTRUCTURAS ENERGETICAS, S.A.U.

Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Torralba Castello, Jose Manuel
  • Rabanal Jimenez, Maria Eugenia
  • Campos Gomez, Monica
  • Ruiz Navas, Elisa Maria
  • Bolzoni, Leandro
  • Tsipas, Sophia Alexandra
  • Torres Miranda, Eloy Alexander
... View more Collapse

Period: 01-01-2012 - 31-12-2013

Type of funding: Regional

Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)

Análisis experimental y numérico del taladrado de<br/> materiales compuestos .

  • Diaz Alvarez, Antonio
  • Miguelez Garrido, Maria Henar
  • Santiuste Romero, Carlos

Reading date: 24-11-2017

Modelización de la evolución del desgaste en herramientas de corte

  • Miguelez Garrido, Maria Henar
  • Ramirez Paredes, Fernando
  • Soldani, Xavier

Reading date: 08-10-2015

Reading institution: CAMPUS DE LEGANES

Análisis experimental y numérico de la fractura de<br/> fémur humano

  • Marco Esteban, Miguel
  • Miguelez Garrido, Maria Henar
  • Giner Maravilla, Eugenio

Reading date: 27-01-2017

Formulación de un algoritmo eficiente de integración de un modelo de daño isótropo y validación en condiciones dinámicas

  • Marino Romero, Javier
  • Miguelez Garrido, Maria Henar

Reading date: 04-02-2016

Drilling processes improvement for multi material CFRP-AL-TI stacks

  • Fernandez Perez, Juan
  • Miguelez Garrido, Maria Henar
  • Cantero Guisandez, Jose Luis

Reading date: 18-12-2020

Analysis of relevant factors affecting fretting fatigue behaviour of aeronautical alloys

  • Infante Garcia, Diego
  • Miguelez Garrido, Maria Henar
  • Giner Maravilla, Eugenio

Reading date: 11-12-2020

Análisis Experimental y Numérico del Proceso de Taladrado de Materiales Compuestos de Fibra de Carbono

  • Feito Sanchez, Norberto
  • Miguelez Garrido, Maria Henar

Reading date: 11-07-2016

Reading institution: CAMPUS DE LEGANES

Análisis experimental y numérico de las tensiones residuales debidas a mecanizado en aceros inoxidables austeníticos

  • Canteli Fernandez, Jose Antonio
  • Muñoz Sanchez, Ana
  • Miguelez Garrido, Maria Henar

Reading date: 09-12-2008

Reading institution: CAMPUS DE LEGANES

Estudio Numérico de los Fenómenos de Contacto en el Mecanizado

  • Cheriguene, Rachid
  • Molinari, Alain Louis
  • Miguelez Garrido, Maria Henar

Reading date: 09-12-2009

Pirómetro de fibra óptica a dos colores

  • Vazquez Garcia, Maria Carmen
  • Tapetado Moraleda, Alberto
  • Miguelez Garrido, Maria Henar
  • Diaz Alvarez, Jose

21/7/2017

Date filed: 22-04-2015

Date issued: 21-07-2017

Last data update: 4/8/24 9:02 PM