Los datos mostrados de la Universidad Carlos III de Madrid son parciales, pues con ellos se pretende responder a 2 preguntas:
- ¿Quién investiga un tema concreto?
- ¿Qué investiga un/a investigador/a, grupo o departamento específico?
Por esta razón sólo recoge investigadores/as en activo.
Además, sólo se recogen los resultados de investigación siguiendo estos límites:
- Proyectos de investigación desde 2006.
- Publicaciones, Tesis doctorales, Patentes y Software desde 2008.
Arias Hernandez, Angel aariash@ing.uc3m.es
Actividades
- Artículos 37
- Libros 0
- Capítulos de libro 3
- Congresos 26
- Documentos de trabajo 0
- Informes técnicos 0
- Proyectos de investigación 50
- Tesis dirigidas 4
- Patentes o licencias de software 0
Magneto-mechanical system to reproduce and quantify complex strain patterns in biological materials
- Moreno Mateos, Miguel Angel
- Gonzalez Rico, Jorge
- Nunez Sardinha, Emanuel
- Gomez Cruz, Clara
- Lopez Donaire, Maria Luisa
- Lucarini San José, Sergio
- Arias Hernandez, Angel
- Muñoz Barrutia, Maria Arrate
- Velasco Bayon, Diego
- Garcia Gonzalez, Daniel
Applied Materials Today (p. 1-15) - 6/2022
https://doi.org/10.1016/j.apmt.2022.101437 Ver en origen
- ISSN 2352-9407
Conductive 3D printed PLA composites: On the interplay of mechanical, electrical and thermal behaviours
- Tirado Garcia, Ignacio
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Rusinek, Alexis
- Robles Muñoz, Guillermo
- Martinez Tarifa, Juan Manuel
- Arias Hernandez, Angel
COMPOSITE STRUCTURES (p. 1-9) - 6/2021
https://doi.org/10.1016/j.compstruct.2021.113744 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Influence of elastomeric matrix and particle volume fraction on the mechanical response of magneto-active polymers
- Garcia Gonzalez, Daniel
- Moreno Pelayo, Miguel Angel
- Valencia Blanco, Leticia
- Arias Hernandez, Angel
- Velasco Bayon, Diego
COMPOSITES PART B-ENGINEERING (p. 1-11) - 6/2021
https://doi.org/10.1016/j.compositesb.2021.108796 Ver en origen
- EISSN 1879-1069
- ISSN 1359-8368
New experimental insights into magneto-mechanical rate dependences of magnetorheological elastomers
- Gonzalez-rico Iriarte, Jorge
- Lopez Donaire, Maria Luisa
- Garcia Gonzalez, Daniel
- Moreno Mateos, Miguel Angel
- Arias Hernandez, Angel
COMPOSITES PART B-ENGINEERING (p. 1-21) - 11/2021
https://doi.org/10.1016/j.compositesb.2021.109148 Ver en origen
- EISSN 1879-1069
- ISSN 1359-8368
Low temperature mechanical behaviour of PVDF: cryogenic pre-treatment, quasi-static, cyclic and dynamic experimental testing and modelling
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Rusinek, Alexis
- Bernier, Richard
- Arias Hernandez, Angel
MECHANICS OF MATERIALS (p. 1-13) - 8/2020
https://doi.org/10.1016/j.mechmat.2020.103436 Ver en origen
- EISSN 1872-7743
- ISSN 0167-6636
Design of FDM 3D printed polymers: An experimental-modelling methodology for the prediction of mechanical properties
- Garzon Hernandez, Sara
- Garcia Gonzalez, Daniel
- Jerusalem, A.
- Arias Hernandez, Angel
Materials and Design (p. 1-10) - 3/2020
A continuum constitutive model for FDM 3D printed thermoplastics
- Garzon Hernandez, Sara
- Arias Hernandez, Angel
- Garcia Gonzalez, Daniel
COMPOSITES PART B-ENGINEERING (p. 108373(1)-108373(13)) - 11/2020
https://doi.org/10.1016/j.compositesb.2020.108373 Ver en origen
- EISSN 1879-1069
- ISSN 1359-8368
Temperature and strain rate dependences on hardening and softening behaviours in semi-crystalline polymers: Application to PEEK
- Barba D
- Arias A
- Garcia-Gonzalez D
International Journal Of Solids And Structures (p. 205-217) - 1/1/2020
10.1016/j.ijsolstr.2019.08.021 Ver en origen
- EISSN 1879-2146
- ISSN 00207683
Innovative acrylic thermoplastic composites versus conventional composites: Improving the impact performances
- Kinvi Dossou, G.
- Matadi Boumbimba, R.
- Bonfoh, N.
- Garzon Hernandez, Sara
- Garcia Gonzalez, Daniel
- Gerard, P.
- Arias Hernandez, Angel
COMPOSITE STRUCTURES (p. 1-13) - 6/2019
https://doi.org/10.1016/j.compstruct.2019.02.090 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Strain rate effect on the mechanical behavior of polyamide composites under compression loading
- Massaq, Abdellah
- Rusinek, Alexis
- Klosak, Maciej
- Bahi, Slim
- Arias Hernandez, Angel
COMPOSITE STRUCTURES (p. 114-122) - 4/2019
https://doi.org/10.1016/j.compstruct.2019.01.101 Ver en origen
- EISSN 1879-1085
- ISSN 0263-8223
Este/a investigador/a no tiene libros.
Failure Behavior of Aluminum Alloys Under Different Stress States. In: Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures
- Rodriguez Millan, Marcos
- Garcia Gonzalez, Daniel
- Arias Hernandez, Angel
Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures (p. 1-25) - 12/2020
Editor: SPRINGER
https://doi.org/10.1007/978-1-4614-8968-9_68-1 Ver en origen
- ISBN 978-1-4614-8968-9
Thermo-mechanics of Polymers at Extreme and Failure Conditions: Influence of Strain Rate and Temperature. In: Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures
- Garcia Gonzalez, Daniel
- Garzon Hernandez, Sara
- Barba, Daniel
- Arias Hernandez, Angel
Handbook of Damage Mechanics: Nano to Macro Scale for Materials and Structures (p. 1-28) - 10/2020
Editor: SPRINGER
https://doi.org/10.1007/978-1-4614-8968-9_67-1 Ver en origen
- ISBN 978-1-4614-8968-9
Analysis of high-speed impact problems in the aircraft industry. In: Constitutive Relations under Impact Loadings: Experiments, Theoretical and Numerical Aspects
- Arias Hernandez, Angel
- Lopez Puente, Jorge
- Loya Lorenzo, Jose Antonio
- Varas Doval, David
- Zaera Polo, Ramon Eulalio
Constitutive Relations under Impact Loadings: Experiments, Theoretical and Numerical Aspects (p. 137-207) - 6/2014
Editor: SPRINGER
https://doi.org/10.1007/978-3-7091-1768-2 Ver en origen
- ISBN 978-3-7091-1767-5
Impact mechanical behaviour of graphite fiber reinforced peek
- Garcia Gonzalez, Daniel
- Rusinek, A.
- Jankowiak, T.
- Arias Hernandez, Angel
ICCS18: 18th International Conference on Composite Structures - 2015
Numerical and experimental behavior of PEEK composite materials under low impact energy
- Garcia Gonzalez, Daniel
- Rusinek, Alexis
- Jankowiak, T.
- Arias Hernandez, Angel
CACMS 2015: International Conference on Advances in Composite Materials and Structures - 2015
Experimental punching technique for ductile fracture testing on aluminium sheets
- Garcia Gonzalez, Daniel
- Funes Vecino, Iago
- Rodriguez Millan, Marcos
- Rusinek, Alexis
- Arias Hernandez, Angel
PETER 2015: Annual International Workshop on Dynamic Behaviour of Structures and Materials, Interaction and Friction Across the Strain Rates - 2015
High impact velocity on multi-layared composite of polyether ether ketone and aluminium
- Garcia Gonzalez, Daniel
- Rodriguez Millan, Marcos
- Vaz-romero Santero, Alvaro
- Arias Hernandez, Angel
ECCM16: 16th European Conference on Composite Materials (p. 705-715) - 10/2015
Editor: TAYLOR AND FRANCIS
https://doi.org/10.1080/09276440.2015.1051421 Ver en origen
- ISBN 1568-5543
- EISSN 1568-5543
- ISSN 0927-6440
Thermomechanical behaviour of composite sandwich panels of polymer/metal under low-velocity impact
- Garcia Gonzalez, Daniel
- Aynat Piquer, Ascension
- Vaz-romero Santero, Alvaro
- Rodriguez Millan, Marcos
- Arias Hernandez, Angel
ECCM16: 16th European Conference on Composite Materials (p. 1-5) - 2014
Numerical modeling of dynamic punch of hybrid metal composite for prosthetic intervertebral discs (IVD)
- Aynat Piquer, Ascension
- Garcia Gonzalez, Daniel
- Vaz-romero Santero, Alvaro
- Rodriguez, M.
- Arias Hernandez, Angel
ECCM16: 16th European Conference on Composite Materials - 2014
- ISBN 84-616-9798-7
Interplay between stress waves propagation and flow localization in the dynamic tensile test: application to steel sheets
- Vaz-romero Santero, Alvaro
- Rodriguez Martinez, Jose Antonio
- Arias Hernandez, Angel
SOLMECH 2014 (39th Solid Mechanics Conference) - 2014
Experimental investigation on the impact behaviour of monolithic and multi-layered composite plates of polycarbonate and aluminium
- Vaz-romero Santero, Alvaro
- Rodriguez Millan, Marcos
- Arias Hernandez, Angel
- Rusinek, Alexis
17th International Conference on Composite Structures (ICCS17) - 2013
Effect of projectile nose shape on the perforation behaviour of 5754-H111 and 6082-T6 aluminium plate
- Vaz-romero Santero, Alvaro
- Rodriguez Millan, Marcos
- Rusinek, Alexis
- Arias Hernandez, Angel
7th International Workshop 2013 on Dynamic Behaviour of Materials and its applications in Industrial Processes - 2013
Editor: COPY RED, S.A.
- ISBN 978-84-940615-5-4
Temperature Increase in ES Steel Sheets Subjected to Perforation by Hemispherical Projectiles
- Rusinek, Alexis
- Rodriguez Martinez, Jose Antonio
- Arias Hernandez, Angel
- Chevier, P.
- Bernier, R.
2011 LWAG Haifa Meeting: New Concepts in Armour Engineering - 2011
Este/a investigador/a no tiene documentos de trabajo.
Este/a investigador/a no tiene informes técnicos.
PID2021-123294OB-I00 - Metamateriales impresos para el aislamiento de banda ancha de vibraciones mecánicas
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
Ejecución: 01-09-2022 - 31-08-2025
Tipo: Nacional
Financiado por: AGENCIA ESTATAL DE INVESTIGACION (AEI)
TED2021-129709B-I00 - Comportamiento mecánico de polímeros termoplásticos reciclados en sucesivos procesos de impresión 3D
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Aranda Ruiz, Josue
- Garcia Gonzalez, Daniel
Ejecución: 01-12-2022 - 30-11-2024
Tipo: Nacional
Financiado por: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Comportamiento balístico de probetas de aluminio creadas por impresión 3D
- Loya Lorenzo, Jose Antonio
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Aranda Ruiz, Josue
Ejecución: 27-04-2022 - 27-05-2022
Tipo: Nacional
Financiado por: IDONIAL
Comportamiento balístico de probetas metálicas por impresión 3D
- Loya Lorenzo, Jose Antonio
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Aranda Ruiz, Josue
Ejecución: 01-12-2021 - 31-12-2021
Tipo: Nacional
Financiado por: IDONIAL
886519 - BEDYN: Development of a methodology (test, measurement, analysis) to characterize the BEhaviour of composite structures under DYNamic loading
- Artero Guerrero, Jose Alfonso
- Arias Hernandez, Angel
- Lopez Puente, Jorge
- Loya Lorenzo, Jose Antonio
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Vaz-romero Santero, Alvaro
- Montoya Sancha, Andres
- Del Cuvillo Mezquita, Ramon
- Rodriguez Sereno, Jose Manuel
- Martin Montal, Jordi
- Cimadevilla Diez, Adrian
Ejecución: 01-07-2020 - 30-06-2023
Tipo: Europeo
Financiado por: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
BIOMASKIN-CM-UM3M - Biocompatible Magneto-Active Structures to Simulate Skin Wound Healing: an Experimental-Computational Coupled Approach
- Velasco Bayon, Diego
- Garcia Gonzalez, Daniel
- Arias Hernandez, Angel
- Valencia Blanco, Leticia
- Muñoz Barrutia, Maria Arrate
- Garzon Hernandez, Sara
- Tirado Garcia, Ignacio
- Aranda Izuzquiza, Gonzalo De
Ejecución: 01-01-2020 - 31-03-2022
Tipo: Regional
Financiado por: CAM. CONSEJERÍA DE EDUCACIÓN E INVESTIGACION
881603 - GrapheneCore3: Graphene Flagship Core Project 3
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Vaz-romero Santero, Alvaro
- Montoya Sancha, Andres
- Del Cuvillo Mezquita, Ramon
Ejecución: 01-04-2020 - 30-09-2023
Tipo: Europeo
Financiado por: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
RTI2018-094318-B-I00 - EXPERIMENTACIÓN Y MODELIZACIÓN DEL COMPORTAMIENTO MECÁNICO Y ELÉCTRICO DE ESTRUCTURAS INTELIGENTES DE POLÍMEROS ELECTROACTIVOS
- Arias Hernandez, Angel
- Martinez Tarifa, Juan Manuel
- Navarro Ugena, Carlos
- Robles Muñoz, Guillermo
Ejecución: 01-01-2019 - 30-09-2022
Tipo: Nacional
Financiado por: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Respuesta estructural de panel aeronáutico de antena RX sometido a cargas de impacto. Pedido nº 4300178267/10
- Arias Hernandez, Angel
- Navarro Ugena, Carlos
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Garzon Hernandez, Sara
- Tirado Garcia, Ignacio
Ejecución: 01-01-2018 - 01-03-2018
Tipo: Regional
Financiado por: INDRA SISTEMAS, S.A.
GA- 785219 - GRAPHENE Core 2: Graphene-based revolutions in ICT and beyond
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Del Cuvillo Mezquita, Ramon
Ejecución: 01-04-2018 - 31-03-2020
Tipo: Europeo
Financiado por: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
Connecting 3D printing parameters and mechanical properties of FDM polymers: Experiments and modelling
- Arias Hernandez, Angel
- Garzon Hernandez, Sara
- Garcia Gonzalez, Daniel
Fecha de defensa: 08-11-2019
A continuum mechanics framework for hyperelastic materials: Connecting experiments and modelling
- Arias Hernandez, Angel
- Garcia Gonzalez, Daniel
Fecha de defensa: 30-11-2016
Defensa realizada en: CAMPUS DE LEGANES
Advanced constitutive relations for modeling thermo-viscoplastic behavior of metallic alloys subjected to impact loading
- Arias Hernandez, Angel
- Rodriguez Martinez, Jose Antonio
- Rusinek, Alexis
Fecha de defensa: 19-02-2010
Elastoplastic solids subjected to dynamic tension: New experimental and computational insights
- Rodriguez Martinez, Jose Antonio
- Vaz-romero Santero, Alvaro
- Arias Hernandez, Angel
Fecha de defensa: 05-10-2015
Defensa realizada en: CAMPUS DE LEGANES
Este/a investigador/a no tiene patentes o licencias de software.
Grupos de investigación
Perfiles de investigador/a
-
ORCID
-
Scopus Author ID
-
Dialnet id