The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Barbero Pozuelo, Enrique ebarbero@ing.uc3m.es

Mecánica de Medios Continuos y Teoría de Estructuras / Universidad Carlos III de Madrid

Publications

Open Access

The high-velocity impact behaviour of kevlar composite laminates filled with cork powder

  • Amaro, Ana Martins
  • Reis, Paulo
  • Ivañez Del Pozo, Ines
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique

Applied Sciences (p. 1-12) - 9/2020

https://doi.org/10.3390/app10176108 View at source

  • ISSN 2076-3417
Open Access

The effects of water absorption and salt fog exposure on agglomerated cork compressive response

  • Sergi, Claudia
  • Sarasini, Fabrizio
  • Fiori, Vincenzo
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Tirillo, Jacopo

European Journal of Wood and Wood Products (p. 101-114) - 2/2022

https://doi.org/10.1007/s00107-021-01754-7 View at source

  • EISSN 1436-736X
  • ISSN 0018-3768
Open Access

The Potential of Agglomerated Cork for Sandwich Structures: A Systematic Investigation of Physical, Thermal, and Mechanical Properties

  • Sergi, Claudia
  • Tirillò, Jacopo
  • Sarasini, Fabrizio
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Burgstaller, Christoph

Polymers (p. 2118) - 12/2019

https://doi.org/10.3390/polym11122118 View at source

  • ISSN 2073-4360
Open Access

Temperature, strain rate and anisotropy effects on compressive response of natural and syntheti cellular core materials

  • Sergi, Claudia
  • Sarasini, Fabrizio
  • Tirillo, Jacopo
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Sasso, Marco
  • Mancini, Edoardo
... View more Collapse

COMPOSITE STRUCTURES (p. 1-18) - 3/2021

https://doi.org/10.1016/j.compstruct.2020.113268 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Stiffness control in adaptive thin-walled laminate composite beams

  • Rivas Rodriguez, Elisa
  • Barbero Pozuelo, Enrique

COMPOSITES PART A-APPLIED SCIENCE AND MANUFACTURING (p. 118-126) - 1/2016

https://doi.org/10.1016/j.compositesa.2015.10.016 View at source

  • EISSN 1878-5840
  • ISSN 1359-835X

Residual Flexural Strength After Low-Velocity Impact in Glass/Polyester Composite Beams

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos

COMPOSITE STRUCTURES (p. 25-30) - 1/2010

https://doi.org/10.1016/j.compstruct.2009.06.007 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Polypropylene/Hemp Fabric Reinforced Composites: Manufacturing and Mechanical Behaviour

  • Schiavoni, E.
  • Scarponi, C.
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Sarasini, F.

Journal of Biobased Materials and Bioenergy (p. 361-369) - 8/2012

https://doi.org/10.1166/jbmb.2012.1245 View at source

  • EISSN 1556-6579
  • ISSN 1556-6560

Numerical modelling of foam-cored sandwich plates under high-velocity impact

  • Ivañez Del Pozo, Ines
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

COMPOSITE STRUCTURES (p. 2392-2399) - 8/2011

https://doi.org/10.1016/j.compstruct.2011.03.028 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Numerical analysis of interlaminar stresses in open-hole laminates under compressionNumerical analysis of interlaminar stresses in open-hole laminates under compression

  • Solis Fajardo, Alberto
  • Sanchez Saez, Sonia
  • Martinez, X
  • Barbero Pozuelo, Enrique

COMPOSITE STRUCTURES (p. 89-99) - 6/2019

10.1016/j.compstruct.2019.03.027 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Nondimensional analysis of ballistic impact on thin woven laminate plates

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

INTERNATIONAL JOURNAL OF IMPACT ENGINEERING (p. 8-15) - 1/2012

https://doi.org/10.1016/j.ijimpeng.2011.08.009 View at source

  • EISSN 1879-3509
  • ISSN 0734-743X

Vigas de tipo laminado sometidas a cargas impulsiva: una aproximación analítica, numérica y experimental

  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

2011

Editor: Editorial Académica Española

  • ISBN 978-3844340440

Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013

Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH

  • ISBN 978-94-007-5328-0

Analysis of Damage in Hybrid Composites Subjected to Ballistic Impacts: An Integrated Non-destructive Approach. In: Handbook of Composites from Renewable Materials. Vol.3: Physico-Chemical and Mechanical Characterization

  • Sfarra, S
  • López, F.
  • Sarasini, F.
  • Tirillò, J
  • Ferrante, L
  • Perilli, S
  • Ibarra-castanedo, C
  • Paoletti, D
  • Lampani, L
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Maldague, X
... View more Collapse

Handbook of Composites from Renewable Materials. Vol.3: Physico-Chemical and Mechanical Characterization (p. 175-210) - 7/2017

Editor: John Wiley & Sons, Inc, New York

https://doi.org/10.1002/9781119441632.ch47 View at source

  • ISBN 9781119223665
Open Access

Viabilidad del uso de corcho aglomerado como núcleo de estructuras sandwich sometidas a impacto = Feasibility of the use of agglomerated cork as the core of sandwich structures subject to impact

  • Sergi, Claudia
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Tirillo, J.
  • Sarasini, F.

MATCOMP'19: XIII Congreso Nacional de Materiales Compuestos (p. 186-186) - 2022

Editor: AICIA (ASOCIACION ESPAÑOLA DE MATERIALES COMPUESTOS AEMAC)

https://doi.org/10.23967/r.matcomp.2022.07.016 View at source

  • ISBN 2531-0739
Open Access

Tolerancia al daño de placas de laminados reparadas = Damage tolerance in repaired composite laminates

  • Ivañez Del Pozo, Ines
  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

MATCOMP19: XIII Congreso Nacional de Materiales Compuestos (p. 83-87) - 2019

Editor: AICIA (ASOCIACION ESPAÑOLA DE MATERIALES COMPUESTOS AEMAC)

  • ISBN 531-0739

Size effect on damage evolution in open-hole composite laminates

  • Moure Cuadrado, Marta Maria
  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Barbero, Ever Jose

ECCM16: 16th European Conference on Composite Materials - 2014

Perforation Modelling of Thin Laminated Plates

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

Workshop on Dynamic Failure of Composite and Sandwich Structures - 2011

On the prediction of bolted composite joints: analytical and numerical models

  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

MECHCOMP2014: 1st International Conference on Mechanics of Composites - 2014

On the Modeling of Ductile Composite under Low-Velocity Impact

  • Moure Cuadrado, Marta Maria
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures - 2012

Nuevo útil de compresión después de impacto para laminados delgados

  • Remacha, M.
  • Lopez-romano, B.
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

X Congreso Nacional de Materiales Compuestos. MATCOMP2013 - 2013

Modelo analítico para la predicción del fallo de uniones mecánicas de material compuesto

  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

X Congreso Nacional de Materiales Compuestos. MATCOMP2013 - 2013

Open Access

Mechanical behaviour of bonded repaired composite plates

  • Ivañez Del Pozo, Ines
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Moreno Fernandez-cañadas, Lorena Maria
  • Moure Cuadrado, Marta Maria
  • Barbero, Ever Jose
  • Barbero Pozuelo, Enrique
... View more Collapse

CNME2018 & TEMM2018: 11th National Congress oF Experimental Mechanics & 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials (p. 1073-1078) - 2018

Editor: UNIVERSIDADE DO PORTO

  • ISBN 9789892087719

Influencia del espesor en el rango de aplicación de un útil CAI desarrollado para laminados delgados

  • Remacha, M.
  • Lopez-romano, B.
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

MATCOMP15: XI Congreso Nacional de Materiales Compuestos (p. 1147-1152) - 2015

Editor: Universidad Rey Juan Carlos (URJC)

  • ISBN 978-84-697-0406-6

This researcher has no working papers.

This researcher has no technical reports.

PID2021-127174OB-I00 - Respuesta frente a cargas impulsivas de estructuras sandwich sostenibles en condiciones de baja temperatura

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

Period: 01-09-2022 - 31-08-2025

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Realización de ensayos de impacto según AITM 1.0010 sobre probetas de material compuesto

  • Garcia Castillo, Shirley Kalamis
  • Ivañez Del Pozo, Ines
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

Period: 31-03-2017 - 05-05-2017

Type of funding: National

Funding entity: UNIVERSIDAD POLITECNICA DE VALENCIA

Prestación de Servicios de Ingeniería en el Área de Ensayos Mecánicos Tracción-Control

  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis

Period: 20-02-2006 - 22-03-2006

Type of funding: Internal

Funding entity: AIRBUS OPERATIONS, S.L.

Impacto sobre placas de fibra de carbono/epoxi

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

Period: 16-07-2007 - 23-07-2007

Type of funding: National

Funding entity: UNIVERSIDAD DE ZARAGOZA

INNOVACIÓN EN COMPOSITES AVANZADOS Y REAR-END OPTIMIZADO (ICARO)

  • J.M. López
  • E. Barrera
  • M. Ruiz
  • G. de Arcas (Investigador principal (IP))
  • Barrera López de Turiso, Eduardo (Investigador/a)

Period: 01-01-2008 - 31-12-2011

Type of funding: Regional

Funding entity: AERNNOVA ENGINEERING SOLUTIONS S.A.

Estudio del comportamiento frente a impactos de baja velocidad de estructuras sándwich

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Puerta Hueso, Sergio
  • Ivañez Del Pozo, Ines
  • Pedroche Arias, David

Period: 25-05-2010 - 15-06-2010

Type of funding: National

Funding entity: INSTITUTO DE CIENCIAS DE MATERIALES DE ARAGON

DPI2017-86324-R - Estudio del comportamiento frente a impacto y post-impacto de palas de aerogenerador fabricadas de estructuras sándwich

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Ivañez Del Pozo, Ines

Period: 01-01-2018 - 30-09-2021

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Estudio del comportamiento frente a cargas axiales, de fatiga y fluencia de componentes mecánicos

  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Ivañez Del Pozo, Ines
  • Moure Cuadrado, Marta Maria
  • Moreno Fernandez-cañadas, Lorena Maria
  • Moya Sanz, Elena Maria
... View more Collapse

Period: 02-07-2015 - 01-09-2015

Type of funding: Regional

Funding entity: CAUCHOS BRUNETE

Ensayos de impacto según AITM 1.0010 sobre probetas de material compuesto

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Ivañez Del Pozo, Ines

Period: 19-09-2016 - 25-09-2016

Type of funding: National

Funding entity: UNIVERSIDAD POLITECNICA DE VALENCIA

Ensayos de compresión sobre componentes aeronáuticos

  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Puerta Hueso, Sergio
  • Ivañez Del Pozo, Ines
  • Pedroche Arias, David
  • Moure Cuadrado, Marta Maria
... View more Collapse

Period: 27-02-2012 - 26-04-2012

Type of funding: Regional

Funding entity: COMPAÑIA ESPAÑOLA DE SISTEMAS AERONAUTICOS S.A.

Experimental and Modeling Analysis of the Dynamic Response of Bio-Based Sandwich Structures

  • Sanchez Saez, Sonia
  • Sergi, Claudia
  • Barbero Pozuelo, Enrique

Reading date: 15-06-2021

Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.

  • Barbero Pozuelo, Enrique
  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos

Reading date: 23-10-2015

Reading institution: CAMPUS DE LEGANES

BEHAVIOUR OF CARBON/EPOXY COMPOSITE SANDWICH PANELS WITH SUSTAINABLE CORE MATERIALS SUBJECTED INTERMEDIATE VELOCITY IMPACTS

  • Barbero Pozuelo, Enrique
  • Gomez Meisel, Edgar Arturo
  • Sanchez Saez, Sonia

Reading date: 31-03-2022

Análisis y modelización de estructuras sandwich sometidas a cargas impulsivas

  • Barbero Pozuelo, Enrique
  • Buitrago Perez, Brenda

Reading date: 18-04-2012

Reading institution: ESCUELA POLITECNICA SUPERIOR

Análisis del comportamiento a compresión después de impacto (CAI) de laminados delgados.

  • Barbero Pozuelo, Enrique
  • Remacha Jimenez, Marina
  • Sanchez Saez, Sonia

Reading date: 09-03-2018

Análisis de la evolución del daño en laminados con agujero empleando la mecánica del daño discreto

  • Barbero Pozuelo, Enrique
  • Moure Cuadrado, Marta Maria
  • Garcia Castillo, Shirley Kalamis

Reading date: 22-04-2016

Análisis<br/> de los efectos de borde en laminados de material compuesto mediante modelos<br/> numéricos

  • Barbero Pozuelo, Enrique
  • Solis Fajardo, Alberto
  • Sanchez Saez, Sonia

Reading date: 06-07-2018

This researcher has no patents or software licenses.

Last data update: 4/8/24 3:56 PM