The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Barbero Pozuelo, Enrique ebarbero@ing.uc3m.es

Mecánica de Medios Continuos y Teoría de Estructuras / Universidad Carlos III de Madrid

Publications

Experimental Analysis of Perforation of Glass/Polyester Structures Subjected to High-Velocity Impact

  • Buitrago Perez, Brenda
  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique

MATERIALS LETTERS (p. 1052-1054) - 5/2010

https://doi.org/10.1016/j.matlet.2010.02.007 View at source

  • EISSN 1873-4979
  • ISSN 0167-577X
Open Access

Effect of temperature on the low-velocity impact response of environmentally friendly cork sandwich structures

  • Sergi, Claudia
  • Sarasini, Fabrizio
  • Russo, Pietro
  • Vitiello, Libera
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Tirillo, Jacopo
... View more Collapse

JOURNAL OF SANDWICH STRUCTURES & MATERIALS (p. 1099-1121) - 2/2022

https://doi.org/10.1177%2f10996362211035421 View at source

  • EISSN 1530-7972
  • ISSN 1099-6362
Open Access

Dynamic crushing behaviour of agglomerated cork

  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique
  • Cirne, J.

MATERIALS & DESIGN (p. 743-748) - 1/2015

https://doi.org/10.1016/j.matdes.2014.09.054 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275

Dynamic Analysis of Bending-Torsion Coupled Composite Beams Using the Flexibility Influence Function Method

  • Santiuste Romero, Carlos
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

INTERNATIONAL JOURNAL OF MECHANICAL SCIENCES (p. 1611-1618) - 12/2008

https://doi.org/10.1016/j.ijmecsci.2008.10.005 View at source

  • EISSN 1879-2162
  • ISSN 0020-7403
Open Access

Design tool to predict the open-hole failure strength of composite laminates subjected to in-plane loads

  • Moure Cuadrado, Marta Maria
  • Herrero Cuenca, J.
  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique

COMPOSITE STRUCTURES (p. 1-9) - 4/2020

https://doi.org/10.1016/j.compstruct.2020.111970 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Damage in preloaded glass/vinylester composite panels subjected to high-velocity impacts

  • Garcia Castillo, Shirley Kalamis
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

MECHANICS RESEARCH COMMUNICATIONS (p. 66-71) - 1/2014

10.1016/j.mechrescom.2013.10.019 View at source

  • EISSN 1873-3972
  • ISSN 0093-6413
Open Access

Damage evolution in open-hole laminated composite plates subjected to in-plane loads

  • Moure Cuadrado, Marta Maria
  • Otero, F.
  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Barbero, Ever Jose

COMPOSITE STRUCTURES (p. 1048-1057) - 12/2015

https://doi.org/10.1016/j.compstruct.2015.08.045 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223

Computational analysis of temperature effect in composite bolted joints for aeronautical applications

  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique
  • Miguelez Garrido, Maria Henar

JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (p. 3-11) - 1/2011

https://doi.org/10.1177/0731684410385034 View at source

  • ISSN 0731-6844

Compressive Residual Strength at Low Temperatures of Composite Laminates Subjected to Low-Velocity Impacts

  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Navarro, Carlos

COMPOSITE STRUCTURES (p. 226-232) - 10/2008

https://doi.org/10.1016/j.compstruct.2007.10.026 View at source

  • EISSN 1879-1085
  • ISSN 0263-8223
Open Access

Compression impact behaviour of agglomerated cork at intermediate strain rates

  • Gomez Meisel, Edgar Arturo
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

European Journal of Wood and Wood Products (p. 381-396) - 3/2021

https://doi.org/10.1007/s00107-020-01638-2 View at source

  • EISSN 1436-736X
  • ISSN 0018-3768

Vigas de tipo laminado sometidas a cargas impulsiva: una aproximación analítica, numérica y experimental

  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

2011

Editor: Editorial Académica Española

  • ISBN 978-3844340440

Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013

Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH

  • ISBN 978-94-007-5328-0

Analysis of Damage in Hybrid Composites Subjected to Ballistic Impacts: An Integrated Non-destructive Approach. In: Handbook of Composites from Renewable Materials. Vol.3: Physico-Chemical and Mechanical Characterization

  • Sfarra, S
  • López, F.
  • Sarasini, F.
  • Tirillò, J
  • Ferrante, L
  • Perilli, S
  • Ibarra-castanedo, C
  • Paoletti, D
  • Lampani, L
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Maldague, X
... View more Collapse

Handbook of Composites from Renewable Materials. Vol.3: Physico-Chemical and Mechanical Characterization (p. 175-210) - 7/2017

Editor: John Wiley & Sons, Inc, New York

https://doi.org/10.1002/9781119441632.ch47 View at source

  • ISBN 9781119223665
Open Access

Viabilidad del uso de corcho aglomerado como núcleo de estructuras sandwich sometidas a impacto = Feasibility of the use of agglomerated cork as the core of sandwich structures subject to impact

  • Sergi, Claudia
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Tirillo, J.
  • Sarasini, F.

MATCOMP'19: XIII Congreso Nacional de Materiales Compuestos (p. 186-186) - 2022

Editor: AICIA (ASOCIACION ESPAÑOLA DE MATERIALES COMPUESTOS AEMAC)

https://doi.org/10.23967/r.matcomp.2022.07.016 View at source

  • ISBN 2531-0739
Open Access

Tolerancia al daño de placas de laminados reparadas = Damage tolerance in repaired composite laminates

  • Ivañez Del Pozo, Ines
  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique

MATCOMP19: XIII Congreso Nacional de Materiales Compuestos (p. 83-87) - 2019

Editor: AICIA (ASOCIACION ESPAÑOLA DE MATERIALES COMPUESTOS AEMAC)

  • ISBN 531-0739

Size effect on damage evolution in open-hole composite laminates

  • Moure Cuadrado, Marta Maria
  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Barbero, Ever Jose

ECCM16: 16th European Conference on Composite Materials - 2014

Perforation Modelling of Thin Laminated Plates

  • Garcia Castillo, Shirley Kalamis
  • Sanchez Saez, Sonia
  • Santiuste Romero, Carlos
  • Navarro Ugena, Carlos
  • Barbero Pozuelo, Enrique

Workshop on Dynamic Failure of Composite and Sandwich Structures - 2011

On the prediction of bolted composite joints: analytical and numerical models

  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

MECHCOMP2014: 1st International Conference on Mechanics of Composites - 2014

On the Modeling of Ductile Composite under Low-Velocity Impact

  • Moure Cuadrado, Marta Maria
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

1st International Conference on Mechanics of Nano, Micro and Macro Composite Structures - 2012

Nuevo útil de compresión después de impacto para laminados delgados

  • Remacha, M.
  • Lopez-romano, B.
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

X Congreso Nacional de Materiales Compuestos. MATCOMP2013 - 2013

Modelo analítico para la predicción del fallo de uniones mecánicas de material compuesto

  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos
  • Barbero Pozuelo, Enrique

X Congreso Nacional de Materiales Compuestos. MATCOMP2013 - 2013

Open Access

Mechanical behaviour of bonded repaired composite plates

  • Ivañez Del Pozo, Ines
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Moreno Fernandez-cañadas, Lorena Maria
  • Moure Cuadrado, Marta Maria
  • Barbero, Ever Jose
  • Barbero Pozuelo, Enrique
... View more Collapse

CNME2018 & TEMM2018: 11th National Congress oF Experimental Mechanics & 1st Iberic Conference on Theoretical and Experimental Mechanics and Materials (p. 1073-1078) - 2018

Editor: UNIVERSIDADE DO PORTO

  • ISBN 9789892087719

Influencia del espesor en el rango de aplicación de un útil CAI desarrollado para laminados delgados

  • Remacha, M.
  • Lopez-romano, B.
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

MATCOMP15: XI Congreso Nacional de Materiales Compuestos (p. 1147-1152) - 2015

Editor: Universidad Rey Juan Carlos (URJC)

  • ISBN 978-84-697-0406-6

This researcher has no working papers.

This researcher has no technical reports.

PID2021-127174OB-I00 - Respuesta frente a cargas impulsivas de estructuras sandwich sostenibles en condiciones de baja temperatura

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

Period: 01-09-2022 - 31-08-2025

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Realización de ensayos de impacto según AITM 1.0010 sobre probetas de material compuesto

  • Garcia Castillo, Shirley Kalamis
  • Ivañez Del Pozo, Ines
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

Period: 31-03-2017 - 05-05-2017

Type of funding: National

Funding entity: UNIVERSIDAD POLITECNICA DE VALENCIA

Prestación de Servicios de Ingeniería en el Área de Ensayos Mecánicos Tracción-Control

  • Sanchez Saez, Sonia
  • Barbero Pozuelo, Enrique
  • Santiuste Romero, Carlos
  • Garcia Castillo, Shirley Kalamis

Period: 20-02-2006 - 22-03-2006

Type of funding: Internal

Funding entity: AIRBUS OPERATIONS, S.L.

Impacto sobre placas de fibra de carbono/epoxi

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia

Period: 16-07-2007 - 23-07-2007

Type of funding: National

Funding entity: UNIVERSIDAD DE ZARAGOZA

INNOVACIÓN EN COMPOSITES AVANZADOS Y REAR-END OPTIMIZADO (ICARO)

  • J.M. López
  • E. Barrera
  • M. Ruiz
  • G. de Arcas (Investigador principal (IP))
  • Barrera López de Turiso, Eduardo (Investigador/a)

Period: 01-01-2008 - 31-12-2011

Type of funding: Regional

Funding entity: AERNNOVA ENGINEERING SOLUTIONS S.A.

Estudio del comportamiento frente a impactos de baja velocidad de estructuras sándwich

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Puerta Hueso, Sergio
  • Ivañez Del Pozo, Ines
  • Pedroche Arias, David

Period: 25-05-2010 - 15-06-2010

Type of funding: National

Funding entity: INSTITUTO DE CIENCIAS DE MATERIALES DE ARAGON

DPI2017-86324-R - Estudio del comportamiento frente a impacto y post-impacto de palas de aerogenerador fabricadas de estructuras sándwich

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Ivañez Del Pozo, Ines

Period: 01-01-2018 - 30-09-2021

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Estudio del comportamiento frente a cargas axiales, de fatiga y fluencia de componentes mecánicos

  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Ivañez Del Pozo, Ines
  • Moure Cuadrado, Marta Maria
  • Moreno Fernandez-cañadas, Lorena Maria
  • Moya Sanz, Elena Maria
... View more Collapse

Period: 02-07-2015 - 01-09-2015

Type of funding: Regional

Funding entity: CAUCHOS BRUNETE

Ensayos de impacto según AITM 1.0010 sobre probetas de material compuesto

  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Garcia Castillo, Shirley Kalamis
  • Ivañez Del Pozo, Ines

Period: 19-09-2016 - 25-09-2016

Type of funding: National

Funding entity: UNIVERSIDAD POLITECNICA DE VALENCIA

Ensayos de compresión sobre componentes aeronáuticos

  • Garcia Castillo, Shirley Kalamis
  • Barbero Pozuelo, Enrique
  • Sanchez Saez, Sonia
  • Puerta Hueso, Sergio
  • Ivañez Del Pozo, Ines
  • Pedroche Arias, David
  • Moure Cuadrado, Marta Maria
... View more Collapse

Period: 27-02-2012 - 26-04-2012

Type of funding: Regional

Funding entity: COMPAÑIA ESPAÑOLA DE SISTEMAS AERONAUTICOS S.A.

Experimental and Modeling Analysis of the Dynamic Response of Bio-Based Sandwich Structures

  • Sanchez Saez, Sonia
  • Sergi, Claudia
  • Barbero Pozuelo, Enrique

Reading date: 15-06-2021

Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.

  • Barbero Pozuelo, Enrique
  • Olmedo Marcos, Alvaro
  • Santiuste Romero, Carlos

Reading date: 23-10-2015

Reading institution: CAMPUS DE LEGANES

BEHAVIOUR OF CARBON/EPOXY COMPOSITE SANDWICH PANELS WITH SUSTAINABLE CORE MATERIALS SUBJECTED INTERMEDIATE VELOCITY IMPACTS

  • Barbero Pozuelo, Enrique
  • Gomez Meisel, Edgar Arturo
  • Sanchez Saez, Sonia

Reading date: 31-03-2022

Análisis y modelización de estructuras sandwich sometidas a cargas impulsivas

  • Barbero Pozuelo, Enrique
  • Buitrago Perez, Brenda

Reading date: 18-04-2012

Reading institution: ESCUELA POLITECNICA SUPERIOR

Análisis del comportamiento a compresión después de impacto (CAI) de laminados delgados.

  • Barbero Pozuelo, Enrique
  • Remacha Jimenez, Marina
  • Sanchez Saez, Sonia

Reading date: 09-03-2018

Análisis de la evolución del daño en laminados con agujero empleando la mecánica del daño discreto

  • Barbero Pozuelo, Enrique
  • Moure Cuadrado, Marta Maria
  • Garcia Castillo, Shirley Kalamis

Reading date: 22-04-2016

Análisis<br/> de los efectos de borde en laminados de material compuesto mediante modelos<br/> numéricos

  • Barbero Pozuelo, Enrique
  • Solis Fajardo, Alberto
  • Sanchez Saez, Sonia

Reading date: 06-07-2018

This researcher has no patents or software licenses.

Last data update: 4/8/24 3:56 PM