The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Santiuste Romero, Carlos csantius@ing.uc3m.es
Publications
- Articles 41
- Books 1
- Book chapters 4
- Conferences 39
- Working papers 0
- Technical reports 0
- Research projects 27
- Supervised theses 4
- Patent or software license 0
Experimental analysis of drilling induced damage in biocomposites
- Diaz Alvarez, Antonio
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
TEXTILE RESEARCH JOURNAL (p. 2544-2558) - 11/2018
10.1177/0040517517725118 View at source
- ISSN 0040-5175
Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures
- Garcia Castillo, Shirley Kalamis
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Navarro Ugena, Carlos
- Barbero Pozuelo, Enrique
Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013
Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH
- ISBN 978-94-007-5328-0
Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
Fiber-Reinforced Composites (p. 497-526) - 10/2012
Editor: NOVA SCIENCE PUBLISHERS INC
- ISBN 978-1-61470-433-1
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
Wiley Encyclopedia of Composites (p. 1-14) - 7/2012
Editor: WILEY
https://doi.org/10.1002/9781118097298.weoc200 View at source
- ISBN 978-1-11-809729-8
Influence of Out-of-Plane Stresses on Failure Prediction of Composite Bolted Joints
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
15 th European Conference on Composite Materials (ECCM15) - 2012
Impact on Tubuluar Composite Structures
- Garcia Castillo, Shirley Kalamis
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
16th International Conference on Composite Structures (ICCS16) - 2011
Numerical Modelling of Low-velocity Impact on Honeycomb Cored Sandwich Beams with Composite Face-sheets
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
16th International Conference on Composite Structures (ICCS16) - 2011
Analytical model to predict the secondary bending of composite bolted joints
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical study of the critical energy absorbed by thermoplastic beams with mid-span transverse blind holes
- Neves, C.
- Santiuste Romero, Carlos
- Ferreira, A.j.m.
- Fernandes, A.a
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical modeling of composite cutting including thermal effects
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
17th International Conference on Composite Structures (ICCS17) - 2013
Experimental study of the impact behaviour of thermoplastic beams with mid-span transverse blind holes
- Neves, Paulo C.
- Santiuste Romero, Carlos
- Ferreira, Antonio J. M.
- Fernandes, Antonio A.
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical Modeling of Delamination during Machining of LFRP Composites
- Soldani, Xavier
- Santiuste Romero, Carlos
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
18th International Conference on Composite Materials (ICCM18) - 2011
Failure Prediction in Honeycomb Sandwich Beams Under Low-Velocity Impact
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
18th International Conference on Composite Materials (ICCM18) - 2011
Simulation of the impact behavior of PLA/Flax biocomposites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Diaz Alvarez, Antonio
- Escobar Ortiz-villajos, Eric
- Santiuste Romero, Carlos
19th International Conference on Composite Structures (ICCS19) (p. 172-173) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978887889778
This researcher has no working papers.
This researcher has no technical reports.
TRA2007-66555 - Aplicación de modelos de daño progresivo al análisis estructural de elementos fabricados con materiales compuestos de tipo laminado.
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Sanchez Merino, Angel Luis
- Buitrago Perez, Brenda
Period: 01-10-2007 - 31-12-2010
Type of funding: National
Funding entity: MINISTERIO DE EDUCACION Y CIENCIA SEC. DE ESTADO DE UNIVERSIDADES E INVEST.
UC3M-IME-05-026 - CP05-AVANCE EN EL ESTUDIO DE CRITERIOS DE ROTURA EN CONDICIONES DINÁMICAS DE MATERIALES COMPUESTOS DE USO ESTRUCTURAL
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
Period: 01-01-2006 - 31-01-2007
Funding entity: COMUNIDAD DE MADRID-UC3M
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Period: 16-06-2022 - 15-06-2023
Type of funding: Regional
Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Period: 18-06-2020 - 17-06-2023
Type of funding: Regional
Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES
DPI2010-15123 - ANALISIS DE COMPORTAMIENTOS LAMINADOS CARBONO/EPOXI SOMETIDOS A IMPACTOS DE FRAGMENTOS DE HIELO
- Lopez Puente, Jorge
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Period: 01-01-2011 - 31-12-2013
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
PEDIDO NÚM. A8221464G - Simulation capabilities for Impact predictive models and blade impact damage characterization.
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Period: 07-07-2011 - 30-06-2012
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
DPI2013-43994-R - Análisis experimental y numérico del comportamiento mecánico en condiciones dinámicas de elementos estructurales fabricados con materiales compuestos biodegradables
- Santiuste Romero, Carlos
- Soldani, Xavier
Period: 01-01-2014 - 31-12-2017
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
DPI2017-88166-R - Diseño avanzado de protecciones personales y su interacción con el cuerpo humano
- Rodriguez Millan, Marcos
- Loya Lorenzo, Jose Antonio
- Santiuste Romero, Carlos
- Aranda Ruiz, Josue
- Marco Esteban, Miguel
Period: 01-01-2018 - 31-12-2020
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
JANO. Subproyecto: Probabilistic Desing
- Sanchez Sanchez, Angel
- Cuesta Ruiz, Jose Antonio
- Santiuste Romero, Carlos
Period: 01-01-2020 - 01-03-2022
Type of funding: National
Funding entity: GAMESA INNOVATION AND TECHNOLOGY SLU
CCG06-UC3M/DPI-0771 - CP06: ANÁLISIS DEL PANDEO DE ELEMENTOS ESTRUCTURALES DAÑADOS POR IMPACTOS DE BAJA VELOCIDAD
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
Period: 01-01-2007 - 29-02-2008
Funding entity: COMUNIDAD DE MADRID-UC3M
Análisis experimental y numérico del taladrado de<br/> materiales compuestos .
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
Reading date: 24-11-2017
Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.
- Barbero Pozuelo, Enrique
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
Reading date: 23-10-2015
Reading institution: CAMPUS DE LEGANES
Manufacturing, Characterization and Modelling of Biodegradable Composite Materials
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
Reading date: 07-10-2016
Reading institution: CAMPUS DE LEGANES
This researcher has no patents or software licenses.
Research groups
Researcher profiles
-
ORCID
-
Scopus Author ID
-
Dialnet id