The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Santiuste Romero, Carlos csantius@ing.uc3m.es
Publications
- Articles 41
- Books 1
- Book chapters 4
- Conferences 39
- Working papers 0
- Technical reports 0
- Research projects 27
- Supervised theses 4
- Patent or software license 0
Nonlinear static and dynamic responses of graphene platelets reinforced composite beam with dielectric permittivity
- Wang, Yu
- Feng, Chuang
- Wang, Xinwei
- Zao, Zhan
- Santiuste Romero, Carlos
- Dong, Youheng
- Yang, Jie
APPLIED MATHEMATICAL MODELLING (p. 298-315) - 7/2019
https://doi.org/10.1016/j.apm.2019.02.025 View at source
- ISSN 0307-904X
Buckling and postbuckling of dielectric composite beam reinforced with Graphene Platelets (GPLs)
- Wang, Y.
- Feng, C.
- Santiuste Romero, Carlos
- Zhao, Z.
- Yang, J.
Aerospace Science and Technology (p. 208-218) - 8/2019
https://doi.org/10.1016/j.ast.2019.05.008 View at source
- ISSN 1270-9638
Modelling impact behaviour of all-cellulose composite plates
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 139-143) - 4/2015
https://doi.org/10.1016/j.compstruct.2014.11.072 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Modelling of Composite Sandwich Structures with Honeycomb Core Subjected to High-Velocity Impact
- Buitrago Perez, Brenda
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
COMPOSITE STRUCTURES (p. 2090-2096) - 8/2010
https://doi.org/10.1016/j.compstruct.2009.10.013 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Manufacture of compression moulded PLA based biocomposites: A parametric study
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 995-1000) - 11/2015
https://doi.org/10.1016/j.compstruct.2015.06.066 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Residual Flexural Strength After Low-Velocity Impact in Glass/Polyester Composite Beams
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 25-30) - 1/2010
https://doi.org/10.1016/j.compstruct.2009.06.007 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Numerical modelling of foam-cored sandwich plates under high-velocity impact
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
COMPOSITE STRUCTURES (p. 2392-2399) - 8/2011
https://doi.org/10.1016/j.compstruct.2011.03.028 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 700-709) - 2/2019
https://doi.org/10.1016/j.compstruct.2018.11.018 View at source
- EISSN 1879-1085
- ISSN 0263-8223
FEM Analysis of Dynamic Flexural Behaviour of Composite Sandwich Beams with Foam Core
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
COMPOSITE STRUCTURES (p. 2285-2291) - 1/2010
https://doi.org/10.1016/j.compstruct.2009.07.018 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Machining FEM Model of Long Fiber Composites for Aeronautical Component
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
- Soldani, Xavier
COMPOSITE STRUCTURES (p. 691-698) - 2/2010
https://doi.org/10.1016/j.compstruct.2009.09.021 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures
- Garcia Castillo, Shirley Kalamis
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Navarro Ugena, Carlos
- Barbero Pozuelo, Enrique
Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013
Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH
- ISBN 978-94-007-5328-0
Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
Fiber-Reinforced Composites (p. 497-526) - 10/2012
Editor: NOVA SCIENCE PUBLISHERS INC
- ISBN 978-1-61470-433-1
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
Wiley Encyclopedia of Composites (p. 1-14) - 7/2012
Editor: WILEY
https://doi.org/10.1002/9781118097298.weoc200 View at source
- ISBN 978-1-11-809729-8
Modelización numérica del impacto a baja velocidad sobre vigas sándwich con núcleo metálico de nido de abeja
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
IX Congreso Nacional de Materiales Compuestos (MATCOMP'11) - 2011
Numerical analysis of UHMWPE's multi-layered combinations
- Peinado Seligrat, Jairo
- Wang, Liujiao
- Loya Lorenzo, Jose Antonio
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
LWAG 2019: Light Weight Armour for Defense & Security - 2019
Editor: ENSAIT
On the prediction of bolted composite joints: analytical and numerical models
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
MECHCOMP2014: 1st International Conference on Mechanics of Composites - 2014
FE model<br/>to analyse impact on biodegradable composites including viscoplastic behavior
- Hoang Hoang, Viet Toan
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
MECHCOMP3: 3rd International Conference on Mechanics of Composites - 2017
Editor: Societá Editrice Esculapio
- ISBN 9788893850292
On the application of e-learning in engineering education
- Santiuste Romero, Carlos
- Ruiz Navas, Elisa Maria
- Segovia Vargas, Daniel
SEFI 2015: 43rd Annual Conference of the European Society for Engineering Education - 2015
Editor: European Society for Engineering Education
Perforation Modelling of Thin Laminated Plates
- Garcia Castillo, Shirley Kalamis
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Navarro Ugena, Carlos
- Barbero Pozuelo, Enrique
Workshop on Dynamic Failure of Composite and Sandwich Structures - 2011
Modelo analítico para la predicción del fallo de uniones mecánicas de material compuesto
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
X Congreso Nacional de Materiales Compuestos. MATCOMP2013 - 2013
FE Modeling of Orthogonal Cutting of LFRP Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
XI International Conference on Computational Plasticity (COMPLAS XI): Fundamentals and Applications - 2011
Análisis del taladrado de material compuesto 100% biodegradable
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
XXII Congreso Nacional Ingeniería Mecánica (CNIM 2018) (p. 390-398) - 2018
Editor: UNIVERSIDAD NACIONAL DE EDUCACION A DISTANCIA (UNED)
- ISBN 0212-5072
This researcher has no working papers.
This researcher has no technical reports.
TRA2007-66555 - Aplicación de modelos de daño progresivo al análisis estructural de elementos fabricados con materiales compuestos de tipo laminado.
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Sanchez Merino, Angel Luis
- Buitrago Perez, Brenda
Period: 01-10-2007 - 31-12-2010
Type of funding: National
Funding entity: MINISTERIO DE EDUCACION Y CIENCIA SEC. DE ESTADO DE UNIVERSIDADES E INVEST.
UC3M-IME-05-026 - CP05-AVANCE EN EL ESTUDIO DE CRITERIOS DE ROTURA EN CONDICIONES DINÁMICAS DE MATERIALES COMPUESTOS DE USO ESTRUCTURAL
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
Period: 01-01-2006 - 31-01-2007
Funding entity: COMUNIDAD DE MADRID-UC3M
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Period: 16-06-2022 - 15-06-2023
Type of funding: Regional
Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.
Diseño y fabricación de protecciones avanzadas de cabeza y torso teniendo en cuenta efectos biomecánicos y perspectiva de género (PROTEC BIO GEN)
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
- Cantero Guisandez, Jose Luis
- Isasi Sanchez, Luis
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Rodriguez Millan, Marcos
- Diaz Alvarez, Jose
- Diaz Alvarez, Antonio
- Marco Esteban, Miguel
- Rubio Diaz, Ignacio
- Infante Garcia, Diego
- Miguelez Garrido, Beatriz
- Mantecon Padin, Ramiro
- Rufo Martin, Celia
- Valverde Marcos, Borja
- Alvarez Blanco, Mario
Period: 18-06-2020 - 17-06-2023
Type of funding: Regional
Funding entity: FABRICA ESPAÑOLA DE CONFECCIONES
DPI2010-15123 - ANALISIS DE COMPORTAMIENTOS LAMINADOS CARBONO/EPOXI SOMETIDOS A IMPACTOS DE FRAGMENTOS DE HIELO
- Lopez Puente, Jorge
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Period: 01-01-2011 - 31-12-2013
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
PEDIDO NÚM. A8221464G - Simulation capabilities for Impact predictive models and blade impact damage characterization.
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Period: 07-07-2011 - 30-06-2012
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
DPI2013-43994-R - Análisis experimental y numérico del comportamiento mecánico en condiciones dinámicas de elementos estructurales fabricados con materiales compuestos biodegradables
- Santiuste Romero, Carlos
- Soldani, Xavier
Period: 01-01-2014 - 31-12-2017
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
DPI2017-88166-R - Diseño avanzado de protecciones personales y su interacción con el cuerpo humano
- Rodriguez Millan, Marcos
- Loya Lorenzo, Jose Antonio
- Santiuste Romero, Carlos
- Aranda Ruiz, Josue
- Marco Esteban, Miguel
Period: 01-01-2018 - 31-12-2020
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
JANO. Subproyecto: Probabilistic Desing
- Sanchez Sanchez, Angel
- Cuesta Ruiz, Jose Antonio
- Santiuste Romero, Carlos
Period: 01-01-2020 - 01-03-2022
Type of funding: National
Funding entity: GAMESA INNOVATION AND TECHNOLOGY SLU
CCG06-UC3M/DPI-0771 - CP06: ANÁLISIS DEL PANDEO DE ELEMENTOS ESTRUCTURALES DAÑADOS POR IMPACTOS DE BAJA VELOCIDAD
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
Period: 01-01-2007 - 29-02-2008
Funding entity: COMUNIDAD DE MADRID-UC3M
Análisis experimental y numérico del taladrado de<br/> materiales compuestos .
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
Reading date: 24-11-2017
Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.
- Barbero Pozuelo, Enrique
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
Reading date: 23-10-2015
Reading institution: CAMPUS DE LEGANES
Manufacturing, Characterization and Modelling of Biodegradable Composite Materials
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
Reading date: 07-10-2016
Reading institution: CAMPUS DE LEGANES
This researcher has no patents or software licenses.
Research groups
Researcher profiles
-
ORCID
-
Scopus Author ID
-
Dialnet id