The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Santiuste Romero, Carlos csantius@ing.uc3m.es
Publications
- Articles 41
- Books 1
- Book chapters 4
- Conferences 39
- Working papers 0
- Technical reports 0
- Research projects 27
- Supervised theses 4
- Patent or software license 0
Nonlinear static and dynamic responses of graphene platelets reinforced composite beam with dielectric permittivity
- Wang, Yu
- Feng, Chuang
- Wang, Xinwei
- Zao, Zhan
- Santiuste Romero, Carlos
- Dong, Youheng
- Yang, Jie
APPLIED MATHEMATICAL MODELLING (p. 298-315) - 7/2019
https://doi.org/10.1016/j.apm.2019.02.025 View at source
- ISSN 0307-904X
Buckling and postbuckling of dielectric composite beam reinforced with Graphene Platelets (GPLs)
- Wang, Y.
- Feng, C.
- Santiuste Romero, Carlos
- Zhao, Z.
- Yang, J.
Aerospace Science and Technology (p. 208-218) - 8/2019
https://doi.org/10.1016/j.ast.2019.05.008 View at source
- ISSN 1270-9638
Modelling impact behaviour of all-cellulose composite plates
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 139-143) - 4/2015
https://doi.org/10.1016/j.compstruct.2014.11.072 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Modelling of Composite Sandwich Structures with Honeycomb Core Subjected to High-Velocity Impact
- Buitrago Perez, Brenda
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
COMPOSITE STRUCTURES (p. 2090-2096) - 8/2010
https://doi.org/10.1016/j.compstruct.2009.10.013 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Manufacture of compression moulded PLA based biocomposites: A parametric study
- Rubio Lopez, Angel
- Olmedo Marcos, Alvaro
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 995-1000) - 11/2015
https://doi.org/10.1016/j.compstruct.2015.06.066 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Residual Flexural Strength After Low-Velocity Impact in Glass/Polyester Composite Beams
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 25-30) - 1/2010
https://doi.org/10.1016/j.compstruct.2009.06.007 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Numerical modelling of foam-cored sandwich plates under high-velocity impact
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
COMPOSITE STRUCTURES (p. 2392-2399) - 8/2011
https://doi.org/10.1016/j.compstruct.2011.03.028 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Experimental and numerical analysis of the influence of drill point angle when drilling biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
COMPOSITE STRUCTURES (p. 700-709) - 2/2019
https://doi.org/10.1016/j.compstruct.2018.11.018 View at source
- EISSN 1879-1085
- ISSN 0263-8223
FEM Analysis of Dynamic Flexural Behaviour of Composite Sandwich Beams with Foam Core
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
COMPOSITE STRUCTURES (p. 2285-2291) - 1/2010
https://doi.org/10.1016/j.compstruct.2009.07.018 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Machining FEM Model of Long Fiber Composites for Aeronautical Component
- Santiuste Romero, Carlos
- Miguelez Garrido, Maria Henar
- Soldani, Xavier
COMPOSITE STRUCTURES (p. 691-698) - 2/2010
https://doi.org/10.1016/j.compstruct.2009.09.021 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures
- Garcia Castillo, Shirley Kalamis
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Navarro Ugena, Carlos
- Barbero Pozuelo, Enrique
Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013
Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH
- ISBN 978-94-007-5328-0
Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
Fiber-Reinforced Composites (p. 497-526) - 10/2012
Editor: NOVA SCIENCE PUBLISHERS INC
- ISBN 978-1-61470-433-1
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
Wiley Encyclopedia of Composites (p. 1-14) - 7/2012
Editor: WILEY
https://doi.org/10.1002/9781118097298.weoc200 View at source
- ISBN 978-1-11-809729-8
Influence of Out-of-Plane Stresses on Failure Prediction of Composite Bolted Joints
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
15 th European Conference on Composite Materials (ECCM15) - 2012
Impact on Tubuluar Composite Structures
- Garcia Castillo, Shirley Kalamis
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
16th International Conference on Composite Structures (ICCS16) - 2011
Numerical Modelling of Low-velocity Impact on Honeycomb Cored Sandwich Beams with Composite Face-sheets
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
16th International Conference on Composite Structures (ICCS16) - 2011
Analytical model to predict the secondary bending of composite bolted joints
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical study of the critical energy absorbed by thermoplastic beams with mid-span transverse blind holes
- Neves, C.
- Santiuste Romero, Carlos
- Ferreira, A.j.m.
- Fernandes, A.a
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical modeling of composite cutting including thermal effects
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
17th International Conference on Composite Structures (ICCS17) - 2013
Experimental study of the impact behaviour of thermoplastic beams with mid-span transverse blind holes
- Neves, Paulo C.
- Santiuste Romero, Carlos
- Ferreira, Antonio J. M.
- Fernandes, Antonio A.
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical Modeling of Delamination during Machining of LFRP Composites
- Soldani, Xavier
- Santiuste Romero, Carlos
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
18th International Conference on Composite Materials (ICCM18) - 2011
Failure Prediction in Honeycomb Sandwich Beams Under Low-Velocity Impact
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
- Sanchez Saez, Sonia
18th International Conference on Composite Materials (ICCM18) - 2011
Simulation of the impact behavior of PLA/Flax biocomposites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Diaz Alvarez, Antonio
- Escobar Ortiz-villajos, Eric
- Santiuste Romero, Carlos
19th International Conference on Composite Structures (ICCS19) (p. 172-173) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978887889778
This researcher has no working papers.
This researcher has no technical reports.
CCG10-UC3M/DPI-4694 - Desarrollo de un modelo multi-escala para el comportamiento frente a impacto de laminados carbono/epoxi con arquitectura de tejido
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
- Ivañez Del Pozo, Ines
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Olmedo Marcos, Alvaro
- Moure Cuadrado, Marta Maria
Period: 01-01-2011 - 31-12-2011
Type of funding: Regional
Funding entity: COMUNIDAD DE MADRID-UC3M
Ice debris impact analysis
- Lopez Puente, Jorge
- Arias Hernandez, Angel
- Loya Lorenzo, Jose Antonio
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Pedroche Arias, David
Period: 19-02-2009 - 29-05-2009
Funding entity: AIRBUS OPERATIONS, S.L.
TED2021-130314B-I00 - Estudio del comportamiento de elementos estructurales fabricados con materiales compuestos biodegradables frente a impacto de baja. velocidad
- Loya Lorenzo, Jose Antonio
- Santiuste Romero, Carlos
- Lopez Puente, Jorge
- Aranda Ruiz, Josue
Period: 01-12-2022 - 30-11-2024
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
N.Pedido: A8219339G - Soft mounts modelling rules in dynamic analysis
- Santiuste Romero, Carlos
- Arias Hernandez, Angel
- Lopez Puente, Jorge
- Fernandez Saez, Jose
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Vadillo Martin, Guadalupe
- Zahr Viñuela, Jorge Alonso
- Ivañez Del Pozo, Ines
- Soldani, Xavier
- Olmedo Marcos, Alvaro
Period: 21-12-2010 - 20-12-2011
Type of funding: Regional
Funding entity: AIRBUS OPERATIONS, S.L.
Prestación de Servicios de Ingeniería en el Área de Ensayos Mecánicos Tracción-Control
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
Period: 20-02-2006 - 22-03-2006
Type of funding: Internal
Funding entity: AIRBUS OPERATIONS, S.L.
CCG08-UC3M/DPI-4348 - CP08: Estudio de estructuras sandwich de materiales compuestos como elementos de seguridad pasiva en automóviles
- Sanchez Saez, Sonia
- Lopez Puente, Jorge
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
- Ivañez Del Pozo, Ines
- Pedroche Arias, David
Period: 01-01-2009 - 28-02-2010
Funding entity: COMUNIDAD DE MADRID-UC3M
INNOVACIÓN EN COMPOSITES AVANZADOS Y REAR-END OPTIMIZADO (ICARO)
- J.M. López
- E. Barrera
- M. Ruiz
- G. de Arcas (Investigador principal (IP))
- Barrera López de Turiso, Eduardo (Investigador/a)
Period: 01-01-2008 - 31-12-2011
Type of funding: Regional
Funding entity: AERNNOVA ENGINEERING SOLUTIONS S.A.
- iMarina
- UC3M
Análisis experimental y numérico del taladrado de<br/> materiales compuestos .
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
Reading date: 24-11-2017
Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.
- Barbero Pozuelo, Enrique
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
Reading date: 23-10-2015
Reading institution: CAMPUS DE LEGANES
Manufacturing, Characterization and Modelling of Biodegradable Composite Materials
- Rubio Lopez, Angel
- Santiuste Romero, Carlos
Reading date: 07-10-2016
Reading institution: CAMPUS DE LEGANES
This researcher has no patents or software licenses.
Research groups
Researcher profiles
-
ORCID
-
Scopus Author ID
-
Dialnet id