The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Santiuste Romero, Carlos csantius@ing.uc3m.es
Publications
- Articles 41
- Books 1
- Book chapters 4
- Conferences 39
- Working papers 0
- Technical reports 0
- Research projects 27
- Supervised theses 4
- Patent or software license 0
A Comparison of Progressive-Failure Criteria in the Prediction of the Dynamic Bending Failure of Composite Laminated Beams
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
- Barbero Pozuelo, Enrique
COMPOSITE STRUCTURES (p. 2406-2414) - 3/2010
https://doi.org/10.1016/j.compstruct.2010.03.004 View at source
- EISSN 1879-1085
- ISSN 0263-8223
A review on recent advances in numerical modelling of bone cutting
- Marco Esteban, Miguel
- Rodriguez Millan, Marcos
- Santiuste Romero, Carlos
- Giner, Eugenio
- Miguelez Garrido, Maria Henar
Journal of the Mechanical Behavior of Biomedical Materials (p. 179-201) - 4/2015
https://doi.org/10.1016/j.jmbbm.2014.12.006 View at source
- EISSN 1878-0180
- ISSN 1751-6161
An analytical model for predicting the stiffness and strength of pinned-joints composite laminates
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
COMPOSITES SCIENCE AND TECHNOLOGY (p. 67-73) - 1/2014
https://doi.org/10.1016/j.compscitech.2013.10.014 View at source
- EISSN 1879-1050
- ISSN 0266-3538
An analytical model for the secondary bending prediction in single-lap composite bolted-joints
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
COMPOSITE STRUCTURES (p. 354-361) - 5/2014
https://doi.org/10.1016/j.compstruct.2014.01.015 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Analysis of low-velocity impact on flax/PLA composites using a strain rate sensitive model
- Jalon Sanchez, Ester
- Hoang Hoang, Viet Toan
- Rubio-lopez, A.
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 511-517) - 10/2018
https://doi.org/10.1016/j.compstruct.2018.02.080 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Analysis of orthogonal cutting of biocomposites
- Diaz Alvarez, Antonio
- Diaz Alvarez, Jose
- Cantero Guisandez, Jose Luis
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 1-14) - 2/2020
https://doi.org/10.1016/j.compstruct.2019.111734 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Buckling and postbuckling of dielectric composite beam reinforced with Graphene Platelets (GPLs)
- Wang, Y.
- Feng, C.
- Santiuste Romero, Carlos
- Zhao, Z.
- Yang, J.
Aerospace Science and Technology (p. 208-218) - 8/2019
https://doi.org/10.1016/j.ast.2019.05.008 View at source
- ISSN 1270-9638
Compression after impact of flax/PLA biodegradable composites
- Rubio Lopez, Angel
- Artero Guerrero, Jose Alfonso
- Pernas Sanchez, Jesus
- Santiuste Romero, Carlos
POLYMER TESTING (p. 127-135) - 5/2017
https://doi.org/10.1016/j.polymertesting.2017.01.025 View at source
- EISSN 1873-2348
- ISSN 0142-9418
Computational analysis of temperature effect in composite bolted joints for aeronautical applications
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
- Miguelez Garrido, Maria Henar
JOURNAL OF REINFORCED PLASTICS AND COMPOSITES (p. 3-11) - 1/2011
https://doi.org/10.1177/0731684410385034 View at source
- ISSN 0731-6844
Constitutive model to predict the viscoplastic behaviour of natural fibres based composites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Santiuste Romero, Carlos
COMPOSITE STRUCTURES (p. 8-18) - 11/2016
https://doi.org/10.1016/j.compstruct.2016.08.001 View at source
- EISSN 1879-1085
- ISSN 0263-8223
Analysis of Dynamic Loading of Long Fiber Reinforced Composites. In: Fiber-Reinforced Composites
- Santiuste Romero, Carlos
- Soldani, Xavier
- Lopez Puente, Jorge
- Miguelez Garrido, Maria Henar
Fiber-Reinforced Composites (p. 497-526) - 10/2012
Editor: NOVA SCIENCE PUBLISHERS INC
- ISBN 978-1-61470-433-1
Numerical modeling of LFRP machining. In: Machinability of fibre-reinforced plastics
- Miguelez Garrido, Maria Henar
- Feito Sanchez, Norberto
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Rodriguez Millan, Marcos
- Soldani, Xavier
Machinability of fibre-reinforced plastics (p. 103-138) - 6/2015
Editor: DE GRUYTER
https://doi.org/10.1515/9783110292251-005 View at source
- ISBN 9783110292251
Perforation of composite laminate subjected to dynamic loads. In: Dynamic failure of composite and sandwich structures
- Garcia Castillo, Shirley Kalamis
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Navarro Ugena, Carlos
- Barbero Pozuelo, Enrique
Dynamic failure of composite and sandwich structures (p. 291-337) - 1/2013
Editor: SPRINGER CUSTOMER SERVICE CENTER GMBH
- ISBN 978-94-007-5328-0
Processing and Mechanical Properties of the Workpiece in Machining of Long-Fiber-Reinforced Composites. In: Wiley Encyclopedia of Composites
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Soldani, Xavier
- Loya Lorenzo, Jose Antonio
Wiley Encyclopedia of Composites (p. 1-14) - 7/2012
Editor: WILEY
https://doi.org/10.1002/9781118097298.weoc200 View at source
- ISBN 978-1-11-809729-8
Modeling of viscoelastoplastic behavior of Flax/PLA biodegradable composites
- Rubio Lopez, Angel
- Hoang Hoang, Viet Toan
- Diaz Alvarez, Antonio
- Santiuste Romero, Carlos
2nd International Conference on Mechanics of Composites (MECHCOMP2 2016) (p. 111-111) - 2016
Editor: Societá Editrice Esculapio
- ISBN 978-88-7488-963-1
Modelización numérica del impacto a baja velocidad sobre vigas sándwich con núcleo metálico de nido de abeja
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
IX Congreso Nacional de Materiales Compuestos (MATCOMP'11) - 2011
Modelo analítico para la predicción del fallo de uniones mecánicas de material compuesto
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
- Barbero Pozuelo, Enrique
X Congreso Nacional de Materiales Compuestos. MATCOMP2013 - 2013
Numerical Modeling of Delamination during Machining of LFRP Composites
- Soldani, Xavier
- Santiuste Romero, Carlos
- Cantero Guisandez, Jose Luis
- Miguelez Garrido, Maria Henar
18th International Conference on Composite Materials (ICCM18) - 2011
Numerical Modeling of Post-Processing of Composite Materials
- Soldani, Xavier
- Santiuste Romero, Carlos
- Loya Lorenzo, Jose Antonio
- Miguelez Garrido, Maria Henar
2nd Special Symposium on New Frontiers in Materials Processing Training and Learning (p. 93-98) - 7/2011
https://doi.org/10.4028/www.scientific.net/msf.692.93 View at source
- EISSN 1662-9752
- ISBN 978-3-03785-206-4
- ISSN 0255-5476
Numerical Modelling of Low-velocity Impact on Honeycomb Cored Sandwich Beams with Composite Face-sheets
- Ivañez Del Pozo, Ines
- Santiuste Romero, Carlos
- Sanchez Saez, Sonia
16th International Conference on Composite Structures (ICCS16) - 2011
Numerical analysis of UHMWPE's multi-layered combinations
- Peinado Seligrat, Jairo
- Wang, Liujiao
- Loya Lorenzo, Jose Antonio
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
LWAG 2019: Light Weight Armour for Defense & Security - 2019
Editor: ENSAIT
Numerical modeling of composite cutting including thermal effects
- Santiuste Romero, Carlos
- Diaz Alvarez, Jose
- Soldani, Xavier
- Miguelez Garrido, Maria Henar
17th International Conference on Composite Structures (ICCS17) - 2013
Numerical study of the behaviour of natural fibres composites under low-velocity impact
- Rubio Lopez, Angel
- Diaz Alvarez, Antonio
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
ICCS18: 18th International Conference on Composite Structures - 2015
Numerical study of the critical energy absorbed by thermoplastic beams with mid-span transverse blind holes
- Neves, C.
- Santiuste Romero, Carlos
- Ferreira, A.j.m.
- Fernandes, A.a
17th International Conference on Composite Structures (ICCS17) - 2013
This researcher has no working papers.
This researcher has no technical reports.
DPI2010-15123 - ANALISIS DE COMPORTAMIENTOS LAMINADOS CARBONO/EPOXI SOMETIDOS A IMPACTOS DE FRAGMENTOS DE HIELO
- Lopez Puente, Jorge
- Varas Doval, David
- Santiuste Romero, Carlos
- Zahr Viñuela, Jorge Alonso
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
Period: 01-01-2011 - 31-12-2013
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
ANÁLISIS DEL COMPORTAMIENTO BALÍSTICO DE MATERIALES PARA UGV
- Loya Lorenzo, Jose Antonio
- Rodriguez Millan, Marcos
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Diaz Alvarez, Jose
- Wang, Liujiao
- Valverde Marcos, Borja
- Arevalo Fernandez, Carlos Martin
Period: 16-06-2022 - 15-06-2023
Type of funding: Regional
Funding entity: COMERCIAL HERNANDO MORENO, COHEMO S.L.
DPI2013-43994-R - Análisis experimental y numérico del comportamiento mecánico en condiciones dinámicas de elementos estructurales fabricados con materiales compuestos biodegradables
- Santiuste Romero, Carlos
- Soldani, Xavier
Period: 01-01-2014 - 31-12-2017
Type of funding: National
Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL
TRA2007-66555 - Aplicación de modelos de daño progresivo al análisis estructural de elementos fabricados con materiales compuestos de tipo laminado.
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Sanchez Merino, Angel Luis
- Buitrago Perez, Brenda
Period: 01-10-2007 - 31-12-2010
Type of funding: National
Funding entity: MINISTERIO DE EDUCACION Y CIENCIA SEC. DE ESTADO DE UNIVERSIDADES E INVEST.
886519 - BEDYN: Development of a methodology (test, measurement, analysis) to characterize the BEhaviour of composite structures under DYNamic loading
- Artero Guerrero, Jose Alfonso
- Arias Hernandez, Angel
- Lopez Puente, Jorge
- Loya Lorenzo, Jose Antonio
- Zaera Polo, Ramon Eulalio
- Varas Doval, David
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Pernas Sanchez, Jesus
- Vaz-romero Santero, Alvaro
- Montoya Sancha, Andres
- Del Cuvillo Mezquita, Ramon
- Rodriguez Sereno, Jose Manuel
- Martin Montal, Jordi
- Cimadevilla Diez, Adrian
Period: 01-07-2020 - 30-06-2023
Type of funding: European
Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY
UC3M-IME-05-026 - CP05-AVANCE EN EL ESTUDIO DE CRITERIOS DE ROTURA EN CONDICIONES DINÁMICAS DE MATERIALES COMPUESTOS DE USO ESTRUCTURAL
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
Period: 01-01-2006 - 31-01-2007
Funding entity: COMUNIDAD DE MADRID-UC3M
CCG06-UC3M/DPI-0771 - CP06: ANÁLISIS DEL PANDEO DE ELEMENTOS ESTRUCTURALES DAÑADOS POR IMPACTOS DE BAJA VELOCIDAD
- Barbero Pozuelo, Enrique
- Navarro Ugena, Carlos
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
Period: 01-01-2007 - 29-02-2008
Funding entity: COMUNIDAD DE MADRID-UC3M
CCG07-UC3M/DPI-3406 - CP07: ANÁLISIS DE ELEMENTOS ABSORBEDORES DE ENERGÍA FABRICADOS CON MATERIALES COMPUESTOS SOMETIDOS A IMPACTO.
- Barbero Pozuelo, Enrique
- Lopez Puente, Jorge
- Sanchez Saez, Sonia
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
Period: 01-01-2008 - 28-02-2009
Funding entity: COMUNIDAD DE MADRID-UC3M
CCG08-UC3M/DPI-4348 - CP08: Estudio de estructuras sandwich de materiales compuestos como elementos de seguridad pasiva en automóviles
- Sanchez Saez, Sonia
- Lopez Puente, Jorge
- Santiuste Romero, Carlos
- Garcia Castillo, Shirley Kalamis
- Buitrago Perez, Brenda
- Ivañez Del Pozo, Ines
- Pedroche Arias, David
Period: 01-01-2009 - 28-02-2010
Funding entity: COMUNIDAD DE MADRID-UC3M
Comportamiento balístico de probetas de aluminio creadas por impresión 3D
- Loya Lorenzo, Jose Antonio
- Arias Hernandez, Angel
- Zaera Polo, Ramon Eulalio
- Santiuste Romero, Carlos
- Puerta Hueso, Sergio
- Pedroche Arias, David
- Aranda Ruiz, Josue
Period: 27-04-2022 - 27-05-2022
Type of funding: National
Funding entity: IDONIAL
Análisis experimental y numérico del taladrado de<br/> materiales compuestos .
- Diaz Alvarez, Antonio
- Miguelez Garrido, Maria Henar
- Santiuste Romero, Carlos
Reading date: 24-11-2017
Análisis del comportamiento frente a impacto de protecciones personales fabricadas con polietileno de alto peso molecular (UHMWPE)
- Peinado Seligrat, Jairo
- Santiuste Romero, Carlos
Reading date: 08-07-2022
Desarrollo de modelos predictivos de comportamiento de uniones mecánicas de material compuesto.
- Barbero Pozuelo, Enrique
- Olmedo Marcos, Alvaro
- Santiuste Romero, Carlos
Reading date: 23-10-2015
Reading institution: CAMPUS DE LEGANES
This researcher has no patents or software licenses.
Research groups
Researcher profiles
-
ORCID
-
Scopus Author ID
-
Dialnet id