The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Ruiz Navas, Elisa Maria emruiz@ing.uc3m.es
Publications
- Articles 51
- Books 0
- Book chapters 0
- Conferences 40
- Working papers 0
- Technical reports 0
- Research projects 49
- Supervised theses 5
- Patent or software license 1
Wire Arc Additive Manufacturing (WAAM) for Aluminum-Lithium Alloys: A Review
- Rodriguez Gonzalez, Paula
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
Materials - MDPI (p. 1-20) - 2/2023
https://doi.org/10.3390/ma16041375 View at source
- ISSN 1996-1944
Understanding the properties of low-cost iron-containing powder metallurgy titanium alloys
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
MATERIALS & DESIGN (p. 317-323) - 11/2016
https://doi.org/10.1016/j.matdes.2016.08.010 View at source
- EISSN 1873-4197
- ISSN 0264-1275
The effect of microstructure and strain rate on the 25 degrees C and 700 degrees C compression deformation behavior of powder metallurgy processed Ti-45Al-2Nb-2Mn (at.%)-0.8 TiB2 (vol%) alloy
- Boehlert, C. J.
- Hernandez Escobar, D.
- Ruiz Palenzuela, B.
- Sabirov, I.
- Cornide Arce, Juan
- Ruiz Navas, Elisa Maria
MATERIALS CHARACTERIZATION (p. 110856-110871) - 2/2021
https://doi.org/10.1016/j.matchar.2020.110856 View at source
- EISSN 1873-4189
- ISSN 1044-5803
Study of the properties of low-cost powder metallurgy titanium alloys by 430 stainless steel addition
- Bolzoni, Leandro
- Herraiz Lalana, Enrique
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
MATERIALS & DESIGN (p. 628-636) - 8/2014
https://doi.org/10.1016/j.matdes.2014.04.019 View at source
- EISSN 1873-4197
- ISSN 0264-1275
Study of Compaction and Ejection of Hydrided-Dehydrided Titanium Powder
- Garcia Esteban, Pablo
- Thomas, Y.
- Baril, E.
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
METALS AND MATERIALS INTERNATIONAL (p. 45-55) - 2/2011
https://doi.org/10.1007/s12540-011-0207-z View at source
- ISSN 1598-9623
Sliding Wear Behavior of Intermetallic Ti-45Al-2Nb-2Mn-(at%)-0.8vol%TiB2 Processed by Centrifugal Casting and Hot Isostatic Pressure: Influence of Microstructure
- Shagñay Pucha, Segundo Manuel
- Cornide Arce, Juan
- Ruiz Navas, Elisa Maria
Materials (p. 1-12) - 11/2022
https://doi.org/10.3390/ma15228052 View at source
- ISSN 1996-1944
Secondary Phases Quantification and Fracture Toughness at Cryogenic Temperature of Austenitic Stainless Steel Welds for High-Field Superconducting Magnets
- Aviles Santillana, Ignacio
- Fernandez Pison, Maria Del Pilar
- Langeslag, Stefanie A. E.
- Sgobba, Stefano
- Lunt, Alexander
- Boyer, Christelle
- Ruiz Navas, Elisa Maria
IEEE TRANSACTIONS ON APPLIED SUPERCONDUCTIVITY - 6/2018
https://doi.org/10.1109/tasc.2018.2809481 View at source
- ISSN 1051-8223
Relationship between Manufacturing and Properties of Vacuum Sintered Ti and Ti-6Al-7Nb
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
Journal of Alloys and Compounds (p. 232-242) - 9/2022
10.3390/alloys1030014 View at source
- EISSN 1873-4669
- ISSN 0925-8388
Quantifying the properties of low-cost powder metallurgy titanium alloys
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (p. 47-53) - 2/2017
https://doi.org/10.1016/j.msea.2017.01.049 View at source
- EISSN 1873-4936
- ISSN 0921-5093
Powder metallurgy CP-Ti performances: hydride-dehydride vs. sponge
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
MATERIALS & DESIGN (p. 226-232) - 8/2014
https://doi.org/10.1016/j.matdes.2014.04.005 View at source
- EISSN 1873-4197
- ISSN 0264-1275
This researcher has no books.
This researcher has no book chapters.
Design of a learning method based on Flipped-Classroom methodologies using SPOCs in an engineering course
- Santiuste Romero, Carlos
- Pernas Sanchez, Jesus
- Artero Guerrero, Jose Alfonso
- Varas Doval, David
- Ruiz Navas, Elisa Maria
- Segovia Vargas, Daniel
45th SEFI Annual Conference 2017: Education Excellence for Sustainable Development (p. 407-413) - 2017
Editor: SEFI
- ISBN 9789899887572
Comparison of Microstructure and Properties of Ti-6Al-7Nb Alloy Processed by Different Powder Metallurgy Routes
- Bolzoni, Leandro
- Hari Babu, N.
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
The Minerals, Metals and Materials Society 2013: 142nd Annual meeting and Exhibition (p. 161-179) - 2013
Editor: Trans Tech Publications
https://doi.org/10.4028/www.scientific.net/kem.551.161 View at source
- ISBN 978-3-03785-677-2
Comparison of Boride Coatings Obtained by Pack Cementation on Powder Metallurgy and Wrought Ti and Ti-6Al-4V
- Tsipas, Sophia Alexandra
- Vazquez Alcazar, Maria Del Rosario
- Jimenez Morales, Antonia
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
EURO PM 2009 Congress and Exhibition (p. 381-386) - 2009
Editor: EPMA EUROPEAN POWDER METALLURGY ASSOCIATION
- ISBN 978-1-899072-07-1
Compactación isostática en caliente del titanio y de la aleación Ti-6Al-7Nb: influencia de los parámetros de procesado en la microestructura y en las propiedades mecánicas
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
IV Congreso Nacional de Pulvimetalurgia - 2012
- ISBN 84-695-3723-7
Characterization of Al-Zn-Mg-Cu/(SiC or TiB2)p Composite Powders Obtained by Mechanical Milling
- Jabbari, M. A.
- Ruiz Navas, Elisa Maria
- Salehi, M.
- Torralba Castello, Jose Manuel
European Congress and Exhibition on Avanced Materials and Processes. (EUROMAT 2011) - 2011
Boronizado de Ti y Ti-6Al-4V pulvimetalúrgicos y comparación con boronizado de sustratos Ti-6Al-4V convencionales
- Tsipas, Sophia Alexandra
- Vazquez Alcazar, Maria Del Rosario
- Ruiz Navas, Elisa Maria
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
III Congreso Nacional de Pulvimetalurgia (p. 241-250) - 2010
Editor: UNIVERSIDAD POLITECNICA DE VALENCIA
- ISBN 978-84-8363-564-3
Biomedical Ti-6Al-7Nb Titanium Alloy Produced by P/M Techniques
- Bolzoni, Leandro
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
World PM 2010 Powder Metallurgy World Congress & Exhibition (p. 805-811) - 2010
Editor: EPMA EUROPEAN POWDER METALLURGY ASSOCIATION
- ISBN 978-1-899072-13-2
Analysis of the temperature effect on the lamellar microstructure transformation of a Gamma-TiAl intermetalics processed by fiel assisted hot pressing
- Muñoz Moreno, Rocio
- Srinivasarao, B.
- Sabirov, I.
- Ruiz Navas, Elisa Maria
- Torralba Castello, Jose Manuel
Aerodays 2011: Sixth European Aeronautics Days: \"Innovation for Sustainable Aviation in a Global Environment\" - 2011
Editor: EPMA EUROPEAN POWDER METALLURGY ASSOCIATION
- ISBN 10 84-695-3724-5
An in-situ SEM evaluation of the elevated-temperature tensile and creep deformation behavior of Ti-45Al-2Mn-2Nb-XD
- Muñoz Moreno, Rocio
- Ruiz Navas, Elisa Maria
- Llorca, J.
- Perez Prado, Maria Teresa
- Boehlert, C. J.
4th International Workshop on Titanium Aluminides - 2011
Aleación biomética de titantio Ti-6Al-7Nb producida mediante técnicas pulvimetalúrgicas
- Bolzoni, Leandro
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
III Congreso Nacional de Pulvimetalurgia (p. 215-227) - 2010
Editor: UNIVERSIDAD POLITECNICA DE VALENCIA
- ISBN 978-84-8363-564-3
This researcher has no working papers.
This researcher has no technical reports.
Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 01-01-2012 - 31-12-2013
Type of funding: Regional
Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)
MAT2008-02353-E - RADNETEAST: Propuesta FP7-233505
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
Period: 01-01-2009 - 31-12-2009
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
Production of powders by 2 water atomization.
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
Period: 06-04-2011 - 05-05-2011
Type of funding: European
Funding entity: VIENNA UNIVERSITY OF TECHNOLOGY
Ref.: 07/006 - Production of Small Laboratoy Scale Batches of Improved Materials for characterization
- Pareja Pareja, Ramiro
- Jimenez Morales, Antonia
- Ruiz Amador, Diego
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Monge Alcazar, Miguel Angel
- Campos Gomez, Monica
- Auger Martinez, Maria Angustias
- Muñoz Castellanos, Angel
- Leguey Galan, Teresa
- Ruiz Navas, Elisa Maria
Period: 22-01-2007 - 30-09-2007
Type of funding: Regional
Funding entity: ASOCIACION EURATOM-CIEMAT
Production by gas atomization of 6 powders (6kg per powder)
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Tsipas, Sophia Alexandra
Period: 19-09-2009 - 19-10-2009
Type of funding: European
Funding entity: HOGANAS AB
Procesado y Comportamiento de Banda Bimetálica Bronce-Acero
- Campos Gomez, Monica
- Jimenez Morales, Antonia
- Ruiz Amador, Diego
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
Period: 01-01-2006 - 31-12-2006
Funding entity: COFRISA, COJINETES DE FRICCION S.A.
PID2019-106631GB-C43 - Procesado de materiales compuestos inorgánicos por técnicas de manufactura aditiva basada en enlaces
- Jimenez Morales, Antonia
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Tsipas, Sophia Alexandra
Period: 01-06-2020 - 31-05-2023
Type of funding: National
Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)
Piezas de Gran Tamaño y Complejidad Geométrica mediante Moldeo por Inyección Metálica (MIM): Aplicación al caso de una Prótesis de Rodilla
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
- Tsipas, Sophia Alexandra
Period: 01-04-2008 - 30-06-2009
Funding entity: MIM TECH ALFA, S.L.
MAT2010-09249-E - PeTitNeST: High Performance Titanium by Near Net Shape Technologies
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Torralba Castello, Jose Manuel
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
Period: 01-01-2011 - 31-12-2011
Type of funding: National
Funding entity: MINISTERIO DE CIENCIA E INNOVACION
Optimization and Evaluation of Feedstock for four Powders
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Tsipas, Sophia Alexandra
Period: 08-12-2008 - 31-12-2008
Funding entity: HOGANAS AB
Sinterización con fase líquida de aleaciones de aluminio de la serie 2xxx: estudio de su aleación mecánica, adición de estaño y refuerzo con TiCN
- Delgado Tienda, Maria Luisa
- Ruiz Navas, Elisa Maria
Reading date: 29-10-2008
Reading institution: CAMPUS DE LEGANES
In situ analysis of the high temperature deformation and fracture mechanisms of a gamma titanium aluminide alloy
- Muñoz Moreno, Rocio
- Ruiz Navas, Elisa Maria
- Pérez Prado, Teresa
Reading date: 05-05-2014
Diseño y procesado de aleaciones base titanio mediante técnicas pulvimetalúrgicas avanzadas
- Bolzoni, Leandro
- Gordo Oderiz, Elena
- Ruiz Navas, Elisa Maria
Reading date: 03-11-2011
Reading institution: CAMPUS DE LEGANES
Diseño y Procesado por Vía Pulvimetalúrgica Convencional de Aleaciones de Ti de Bajo Coste
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
Reading date: 01-07-2009
Research groups
Researcher profiles
-
ORCID
-
Scopus Author ID