The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:

  • Who is researching a specific topic?
  • What is an expert, group or particular department researching?

The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.

RDF/XML JSON-LD N3/Turtle RDF/JSON
Author profile at the institutional portal

Ruiz Navas, Elisa Maria emruiz@ing.uc3m.es

Ciencia e Ingeniería de Materiales e Ingeniería Química / Universidad Carlos III de Madrid

Publications

Open Access

Feasibility study of the production of biomedical Ti&-6Al&-4V alloy by powder metallurgy

  • Bolzoni, Leandro
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

Materials Science & Engineering C-Materials for Biological Applications (p. 400-407) - 4/2015

https://doi.org/10.1016/j.msec.2015.01.043 View at source

  • EISSN 1873-0191
  • ISSN 0928-4931

Fabrication of a novel hybrid AlMg5/SiC/PLZT metal matrix composite produced by hot extrusion

  • Montalba, C.
  • Ramam, K.
  • Eskin, D.g.
  • Ruiz Navas, Elisa Maria
  • Prat, O.

MATERIALS & DESIGN (p. 213-218) - 3/2015

https://doi.org/10.1016/j.matdes.2014.12.061 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275
Open Access

Study of the properties of low-cost powder metallurgy titanium alloys by 430 stainless steel addition

  • Bolzoni, Leandro
  • Herraiz Lalana, Enrique
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

MATERIALS & DESIGN (p. 628-636) - 8/2014

https://doi.org/10.1016/j.matdes.2014.04.019 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275
Open Access

Powder metallurgy CP-Ti performances: hydride-dehydride vs. sponge

  • Bolzoni, Leandro
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

MATERIALS & DESIGN (p. 226-232) - 8/2014

https://doi.org/10.1016/j.matdes.2014.04.005 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275
Open Access

Investigation of the factors influencing the tensile behaviour of PM Ti-3Al-2.5V alloy

  • Bolzoni, Leandro
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (p. 266-272) - 7/2014

https://doi.org/10.1016/j.msea.2014.05.017 View at source

  • EISSN 1873-4936
  • ISSN 0921-5093
Open Access

Analysis of crystallographic slip and grain boundary sliding in a Ti-45Al-2Nb-2Mn (at%)-0.8 vol%TiB2 alloy by high temperature in situ mechanical testing

  • Muñoz Moreno, Rocio
  • Ruiz Navas, Elisa Maria
  • Boehlert, C. J.
  • Llorca, J.
  • Torralba Castello, Jose Manuel
  • Perez Prado, M. T.

Materials Science And Engineering A-Structural Materials Properties Microstructure And Processing (p. 276-289) - 12/6/2014

10.1016/j.msea.2014.03.078 View at source

  • EISSN 1873-4936
  • ISSN 09215093
Open Access

Microstructural and mechanical characterisation of 7075 aluminium alloy consolidated from a premixed powder by cold compaction and hot extrusion

  • Jabbari Taleghani, M. A.
  • Ruiz Navas, Elisa Maria
  • Torralba Castello, Jose Manuel

MATERIALS & DESIGN (p. 674-682) - 3/2014

https://doi.org/10.1016/j.matdes.2013.10.028 View at source

  • EISSN 1873-4197
  • ISSN 0264-1275
Open Access

Microstructural development and mechanical properties of PM Ti-45Al-2Nb-2Mn-0.8vol.%TiB2 processed by field assisted hot pressing

  • Muñoz Moreno, Rocio
  • Ruiz Navas, Elisa Maria
  • Srinivasarao, B.
  • Torralba Castello, Jose Manuel

Journal of Materials Science & Technology (p. 1145-1154) - 11/2014

https://doi.org/10.1016/j.jmst.2014.08.008 View at source

  • ISSN 1005-0302
Open Access

Mechanical behaviour of pressed and sintered CP Ti and Ti-6Al-7Nb alloy obtained from master alloy addition powder

  • Bolzoni, Leandro
  • Weissgaerber, T.
  • Kieback, B.
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

Journal of the Mechanical Behavior of Biomedical Materials (p. 149-161) - 4/2013

https://doi.org/10.1016/j.jmbbm.2012.08.022 View at source

  • EISSN 1878-0180
  • ISSN 1751-6161
Open Access

Effect of Stress Level on the High Temperature Deformation and Fracture Mechanisms of Ti-45Al-2Nb-2Mn-0.8 vol. pct TiB2: An In Situ Experimental Study

  • Muñoz Moreno, Rocio
  • Perez Prado, M. Teresa
  • Llorca, Javier
  • Ruiz Navas, Elisa Maria
  • Boehlert, Carl J.

Metallurgical And Materials Transactions A-Physical Metallurgy And Materials Science (p. 1887-1896) - 1/4/2013

10.1007/s11661-012-1515-8 View at source

  • EISSN 1543-1940
  • ISSN 10735623

This researcher has no books.

This researcher has no book chapters.

Open Access

Development and production of wires by powder metallurgical techniques for additive manufacturing

  • Rodriguez Gonzalez, Paula
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

CIRMAT: Nuevos desarrollos para una economía circular. XX Jornada de Materiales (p. 46-47) - 2022

ProductionOf Wires Of Aluminium-lithium Alloys For WAAM By Extrusion Of Metal Powders

  • Rodriguez Gonzalez, Paula
  • Mesas, G
  • Gordo Oderiz, Elena
  • Ruiz Navas, Elisa Maria

EuroPM2019 International Powder Metallurgy Congress & Exhibition - 2019

Extrusion of metal powder to obtain wires of Aluminium-lithium for wire and arc additive manufacturing (WAAM)

  • Rodriguez Gonzalez, Paula
  • Mesas, G
  • Gordo Oderiz, Elena
  • Ruiz Navas, Elisa Maria

European Congress and Exhibition on Advanced Materials and Processes - 2019

Open Access

Design of a learning method based on Flipped-Classroom methodologies using SPOCs in an engineering course

  • Santiuste Romero, Carlos
  • Pernas Sanchez, Jesus
  • Artero Guerrero, Jose Alfonso
  • Varas Doval, David
  • Ruiz Navas, Elisa Maria
  • Segovia Vargas, Daniel

45th SEFI Annual Conference 2017: Education Excellence for Sustainable Development (p. 407-413) - 2017

Editor: SEFI

  • ISBN 9789899887572

Low-cost alfa+beta PM Ti alloys by Fe/Ni addition to pure Ti

  • Bolzoni, Leandro
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

12th Asia-Pacific Conference on Materials Processing (APCMP2016) (p. 153-158) - 2016

Editor: Trans Tech Publications

https://doi.org/10.4028/www.scientific.net/msf.861.153 View at source

  • ISBN 1662-9752
Open Access

Electrochemical comparative study of corrosion behavior in physiological conditions of conventional and powder metallurgy titanium alloys

  • Ureña Alcazar, Julia Maria
  • Gordo Oderiz, Elena
  • Ruiz Navas, Elisa Maria
  • Vilaboa, Nuria
  • Saldana, Laura
  • Jimenez Morales, Antonia

Euro PM2015 Congress & Exhibition - 2015

Editor: EUROPEAN POWDER METALLURGY ASSOCIATION (EPMA)

  • ISBN 978-1-899072-47-7

Estudio electroquímico comparativo del comportamiento a corrosión en condiciones fisiológicas de aleaciones de titanio pulvimetalúrgicas y convencionales

  • Ureña Alcazar, Julia Maria
  • Gordo Oderiz, Elena
  • Ruiz Navas, Elisa Maria
  • Vilaboa, N.
  • Saldaña, L.
  • Jimenez Morales, Antonia

V Congreso Nacional de Pulvimetalurgia - 2015

On the application of e-learning in engineering education

  • Santiuste Romero, Carlos
  • Ruiz Navas, Elisa Maria
  • Segovia Vargas, Daniel

SEFI 2015: 43rd Annual Conference of the European Society for Engineering Education - 2015

Editor: European Society for Engineering Education

Development of low-cost powder metallurgy Titanium Alloys by addition of commercial 430 stainless steel powder

  • Bolzoni, L.
  • Herraiz, E.
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

TMS 2014 143rd Annual Meeting and Exibition (p. 597-604) - 2014

Editor: Ed. John Wiley & Sons, Inc

https://doi.org/10.1002/9781118889879.ch72 View at source

  • ISBN 978-1-118-88972-5

On the microstructure and properties of the Ti-3Al-2.5V alloy obtained by powder metallurgy

  • Bolzoni, Leandro
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

TMS 2014 143rd Annual Meeting & Exhibition (p. 121-128) - 2014

Editor: Ed. John Wiley & Sons, Inc

https://doi.org/10.1002/9781118889879.ch17 View at source

  • ISBN 978-1-118-88972-5

This researcher has no working papers.

This researcher has no technical reports.

CPP2022-009706 - Oportunidades de desarrollo y aplicación de PulviMetalurgia en electrolizadores de intercambio iónico de rendimiento mejorado para la obtención de H2 verde. - PMEMEL-H2

  • Gordo Oderiz, Elena
  • Ruiz Navas, Elisa Maria

Period: 01-12-2023 - 30-11-2026

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

Contrato para la prestación de servicios de asesoramiento

  • Ruiz Navas, Elisa Maria

Period: 24-06-2022 - 24-06-2023

Type of funding: National

Funding entity: INNOVA EXPERTS

Asesoramiento en materia de biocompatibilidad de materiales para el Proyecto europeo UWIPOM2 - Ultra-efficient wireless powered micro-robotic joint for health applications

  • Ruiz Navas, Elisa Maria

Period: 14-05-2020 - 14-11-2020

Type of funding: Regional

Funding entity: UNIVERSIDAD DE ALCALA DE HENARES

PID2019-106631GB-C43 - Procesado de materiales compuestos inorgánicos por técnicas de manufactura aditiva basada en enlaces

  • Jimenez Morales, Antonia
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena
  • Rabanal Jimenez, Maria Eugenia
  • Tsipas, Sophia Alexandra

Period: 01-06-2020 - 31-05-2023

Type of funding: National

Funding entity: AGENCIA ESTATAL DE INVESTIGACION (AEI)

MAT2015-70780-C4-2-P - Compuestos cerámica-metal y aleaciones refractarias de W para su aplicación bajo condiciones de servicio severas: diseño microestructural y nuevas rutas de procesamiento

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Ruiz Navas, Elisa Maria
  • Tsipas, Sophia Alexandra

Period: 01-01-2016 - 31-12-2020

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Amount of funding: 130438,00 Euros.

S2013/MIT-2862 - MULTIMAT-CHALLENGE-CM

  • Gordo Oderiz, Elena
  • Savoini Cardiel, Begoña
  • Ruiz Navas, Elisa Maria
  • Jimenez Morales, Antonia
  • Rabanal Jimenez, Maria Eugenia
  • Pareja Pareja, Ramiro
  • Muñoz Castellanos, Angel
  • Leguey Galan, Teresa
  • Tsipas, Sophia Alexandra
  • Alvaredo Olmos, Paula
  • Parente, Paola
  • Paez Pavon, Alicia
  • Abajo Clemente, Carolina
  • Garcia Das Neves, Roberto
  • Dominguez Reyes, Ricardo
  • Galiana Blanco, Beatriz
  • Carro Sevillano, Gabriel
  • Campo Muga, Ruben Del
  • Velasco Nuñez, Beatriz
  • Ares Morandeira, Raquel
  • Muñoz Fernandez, Lidia
  • Garcia Casas, Amaya
  • Dios Perez, Miguel De
  • Ureña Alcazar, Julia Maria
  • Macias Delgado, Julio
  • Prieto Muñoz, Estela Maria
  • Dios Sinovas, Susana De
  • Nicolas Morillas, Maria De
  • Cifuentes Cuellar, Sandra Carolina
  • Cornide Arce, Juan
  • Alcantara Garcia, Andrea
  • Chirico Rodriguez, Caterina Del Carmen
  • Rodriguez Gonzalez, Paula
  • Herraiz Lalana, Enrique
  • Tabares Lorenzo, Eduardo
... View more Collapse

Period: 01-10-2014 - 31-12-2018

Type of funding: Regional

Funding entity: CAM. CONSEJERÍA DE EDUCACIÓN E INVESTIGACION

FP7-SEC-2012-312804 - COUNTERFOG: Device for Large Scale Fog Decontamination

  • Ruiz Navas, Elisa Maria
  • Lecuona Neumann, Antonio
  • Nogueira Goriba, Jose Ignacio
  • Perez Diaz, Jose Luis
  • Rodriguez Aumente, Pedro Acisclo
  • Diez Jimenez, Efren
  • Alvarez Valenzuela, Marco Antonio
  • Valiente Blanco, Ignacio
  • Martinez Rojas, Juan Antonio
  • Cristache, Cristian
... View more Collapse

Period: 01-11-2013 - 31-10-2017

Type of funding: International

Funding entity: EUROPEAN COMMISSION RESEARCH EXECUTIVE AGENCY

MAT2012-38650-C02-01 - Diseño de la Microestructura y la Microarquitectura de materiales metal-cerámicos utilizando Tecnología Coloidales y Pulvimetalúrgicas

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Ruiz Navas, Elisa Maria
  • Tsipas, Sophia Alexandra
  • Alvaredo Olmos, Paula
  • Garcia Das Neves, Roberto
  • Velasco Nuñez, Beatriz
  • Garcia Casas, Amaya
  • Dios Perez, Miguel De
  • Ureña Alcazar, Julia Maria
... View more Collapse

Period: 01-01-2013 - 30-06-2016

Type of funding: National

Funding entity: MINISTERIO DE ASUNTOS ECONOMICOS Y TRANSFORMACION DIGITAL

Tratamiento criogénico para la producción integral sostenible de mecanizado de piezas metálicas endurecidas

  • Gordo Oderiz, Elena
  • Jimenez Morales, Antonia
  • Torralba Castello, Jose Manuel
  • Rabanal Jimenez, Maria Eugenia
  • Campos Gomez, Monica
  • Ruiz Navas, Elisa Maria
  • Bolzoni, Leandro
  • Tsipas, Sophia Alexandra
  • Torres Miranda, Eloy Alexander
... View more Collapse

Period: 01-01-2012 - 31-12-2013

Type of funding: Regional

Funding entity: ALTA PRECISIÓN INDUSTRIAL MECÁNICA (APRIM)

Addenda a la Cátedra Höganäs de I+D en Pulvimetalurgia - "Liquid Phase Sintering for Dimensional Stability".

  • Torralba Castello, Jose Manuel
  • Campos Gomez, Monica
  • Jimenez Morales, Antonia
  • Gordo Oderiz, Elena
  • Rabanal Jimenez, Maria Eugenia
  • Ruiz Navas, Elisa Maria
  • Tsipas, Sophia Alexandra
  • Torres Miranda, Eloy Alexander
  • Bernardo Quejido, Elena
... View more Collapse

Period: 01-01-2011 - 31-12-2013

Type of funding: International

Funding entity: HOGANAS AB

Diseño y procesado de aleaciones base titanio mediante técnicas pulvimetalúrgicas avanzadas

  • Bolzoni, Leandro
  • Gordo Oderiz, Elena
  • Ruiz Navas, Elisa Maria

Reading date: 03-11-2011

Reading institution: CAMPUS DE LEGANES

Diseño y Procesado por Vía Pulvimetalúrgica Convencional de Aleaciones de Ti de Bajo Coste

  • Garcia Esteban, Pablo
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

Reading date: 01-07-2009

Sinterización con fase líquida de aleaciones de aluminio de la serie 2xxx: estudio de su aleación mecánica, adición de estaño y refuerzo con TiCN

  • Delgado Tienda, Maria Luisa
  • Ruiz Navas, Elisa Maria

Reading date: 29-10-2008

Reading institution: CAMPUS DE LEGANES

Assessment of production, materials and welds applicable at cryogenic temperatures to different components of ITER magnets

  • Aviles Santillana, Ignacio
  • Ruiz Navas, Elisa Maria
  • Sgobba, Stefano

Reading date: 19-06-2019

In situ analysis of the high temperature deformation and fracture mechanisms of a gamma titanium aluminide alloy

  • Muñoz Moreno, Rocio
  • Ruiz Navas, Elisa Maria
  • Pérez Prado, Teresa

Reading date: 05-05-2014

Aleaciones de titanio de bajo coste y métodos para la preparación de las mismas

  • Garcia Esteban, Pablo
  • Bolzoni, Leandro
  • Ruiz Navas, Elisa Maria
  • Gordo Oderiz, Elena

20/4/2011

Date filed: 08-08-2008

Date issued: 20-04-2011

Last data update: 4/24/24 1:10 PM