The data shown for the Universidad Carlos III de Madrid are partial, as they are intended to answer 2 questions:
- Who is researching a specific topic?
- What is an expert, group or particular department researching?
The search results will adhere to the following limits: active Researchers at Carlos III University of Madrid, Projects since 2006 and Publications, Theses, Patents and Software since 2008.
Gordo Oderiz, Elena egordo@ing.uc3m.es
Publications
- Articles 90
- Books 0
- Book chapters 0
- Conferences 109
- Working papers 0
- Technical reports 0
- Research projects 59
- Supervised theses 12
- Patent or software license 1
Influence of porosity on elastic properties of Ti2AlC and Ti3SiC2 MAX phase foams
- Velasco Nuñez, Beatriz
- Gordo Oderiz, Elena
- Hu, Liangfa
- Radovic, Miladin
- Tsipas, Sophia Alexandra
Journal of Alloys and Compounds (p. 24-35) - 10/2018
https://doi.org/10.1016/j.jallcom.2018.06.027 View at source
- EISSN 1873-4669
- ISSN 0925-8388
Influence of powder characteristics on sintering behaviour and properties of PM Ti alloys produced from prealloyed powder and master alloy
- Bolzoni, Leandro
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
POWDER METALLURGY (p. 543-550) - 9/2011
https://doi.org/10.1179/003258910x12827272082623 View at source
- EISSN 1743-2901
- ISSN 0032-5899
Influence of vacuum hot-pressing temperature on the microstructure and mechanical properties of Ti&-3Al&-2.5V alloy obtained by blended elemental and master alloy addition powders
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
MATERIALS CHEMISTRY AND PHYSICS (p. 608-616) - 12/2012
https://doi.org/10.1016/j.matchemphys.2012.10.010 View at source
- ISSN 0254-0584
Interactions between wear and corrosion on cast and sintered Ti-12Nb alloy in comparison with the commercial Ti-6Al-4V alloy
- Çaha, I.
- Alves, A. C.
- Chirico, C.
- Tsipas, S. A.
- Rodrigues, I. R.
- Pinto, A. M.p.
- Grandini, C. R.
- Rocha, L. A.
- Gordo Oderiz, Elena
- Toptan, F.
CORROSION SCIENCE (p. 1-9) - 11/2020
https://doi.org/10.1016/j.corsci.2020.108925 View at source
- EISSN 1879-0496
- ISSN 0010-938X
Introducción al procesado pulvimetalúrgico del Ti=Introduction to podwer metallurgy processes for titanium manufacturing
- Garcia Esteban, Pablo
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
REVISTA DE METALURGIA (p. 169-188) - 4/2011
https://doi.org/10.3989/revmetalmadrid.0943 View at source
- EISSN 1988-4222
- ISSN 0034-8570
Investigation of the factors influencing the tensile behaviour of PM Ti-3Al-2.5V alloy
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING (p. 266-272) - 7/2014
https://doi.org/10.1016/j.msea.2014.05.017 View at source
- EISSN 1873-4936
- ISSN 0921-5093
Joint Effect of Steel Addition and Press-and-Sinter on the Properties of Low-Cost PM Ti Alloys
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
Key Engineering Materials (Key Engineering Materials) (p. 248-254) - 5/2018
https://doi.org/10.4028/www.scientific.net/kem.770.248 View at source
- EISSN 1662-9809
- ISSN 1013-9826
Low-Cost Titanium Alloys? Iron May Hold the Answers
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Bolzoni, Leandro
- Gordo Oderiz, Elena
Metal Powder Report (p. 24-27) - 4/2008
https://doi.org/10.1016/s0026-0657(09)70040-2 View at source
- EISSN 1873-4065
- ISSN 0026-0657
MAX phase Ti2AlC foams using a leachable space-holder material
- Velasco Nuñez, Beatriz
- Gordo Oderiz, Elena
- Tsipas, Sophia Alexandra
Journal of Alloys and Compounds (p. 1036-1042) - 10/2015
https://doi.org/10.1016/j.jallcom.2015.05.235 View at source
- EISSN 1873-4669
- ISSN 0925-8388
MAX phase foams produced via powder metallurgy process using water soluble space holder
- Velasco Nuñez, Beatriz
- Tsipas, Sophia Alexandra
- Ferrari, B
- Gordo Oderiz, Elena
POWDER METALLURGY (p. 95-99) - 5/2015
https://doi.org/10.1179/0032589915z.000000000226 View at source
- EISSN 1743-2901
- ISBN 978-1-899072-45-3
- ISSN 0032-5899
This researcher has no books.
This researcher has no book chapters.
Aleaciones de alta entropía como matriz metálica alternativa en cermets
- Prieto Muñoz, Estela Maria
- Guo, S.
- Gordo Oderiz, Elena
- Alvaredo Olmos, Paula
XIV Congreso Nacional de Materiales - 2016
Aleación biomética de titantio Ti-6Al-7Nb producida mediante técnicas pulvimetalúrgicas
- Bolzoni, Leandro
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
III Congreso Nacional de Pulvimetalurgia (p. 215-227) - 2010
Editor: UNIVERSIDAD POLITECNICA DE VALENCIA
- ISBN 978-84-8363-564-3
Aplicación de las técnicas coloidales al procesamiento de cermets Acero/Ti(C,N) en agua
- Escribano, J.a.
- Gordo Oderiz, Elena
- Sánchez-herencia, A.j.
- Ferrari, Begoña
XI Congreso Nacional de Materiales Compuestos (MATCOMP 15) (p. 553-558) - 2015
Editor: Universidad Rey Juan Carlos (URJC)
- ISBN 978-84-697-0406-6
Aplicación de nuevas metodologías docentes en la asignatura "La materia del arte"
- Gordo Oderiz, Elena
Jornada de Innovación Docente 2022 - 2022
Aqueous processing of SS/Ti(C,N) granules
- Escribano, Juan
- Gordo Oderiz, Elena
- Sanchez-herencia, Javier
- Ferrari, Begoña
Advances in Materials & Processing Technologies (AMPT 2015), Session NC 4 - New approaches for novel cermets - 2015
Assessment of the corrosion behaviour of biomedical titanium with a hybrid organoinorganic sol-gel coating modified with a novel copolymer
- Garcia Casas, Amaya
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
Advances in Materials & Processing Technologies (AMPT 2015), Session THIN 2 - New thin-films for active corrosion protection - 2015
Biomedical Ti-6Al-7Nb Titanium Alloy Produced by P/M Techniques
- Bolzoni, Leandro
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
World PM 2010 Powder Metallurgy World Congress & Exhibition (p. 805-811) - 2010
Editor: EPMA EUROPEAN POWDER METALLURGY ASSOCIATION
- ISBN 978-1-899072-13-2
Boronizado de Ti y Ti-6Al-4V pulvimetalúrgicos y comparación con boronizado de sustratos Ti-6Al-4V convencionales
- Tsipas, Sophia Alexandra
- Vazquez Alcazar, Maria Del Rosario
- Ruiz Navas, Elisa Maria
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
III Congreso Nacional de Pulvimetalurgia (p. 241-250) - 2010
Editor: UNIVERSIDAD POLITECNICA DE VALENCIA
- ISBN 978-84-8363-564-3
Combination of Colloidal Techniques and Powder Metallurgy for Processing Fe-Ti(C,N) Cermets
- Gordo Oderiz, Elena
- Alvaredo Olmos, Paula
- Ferrari, B
- Escribano, J.a.
- Sánchez-herencia, A.j.
Euro PM2014 Congress & Exhibition - 2014
- ISBN 978-1-899072-45-3
Compactación isostática en caliente del titanio y de la aleación Ti-6Al-7Nb: influencia de los parámetros de procesado en la microestructura y en las propiedades mecánicas
- Bolzoni, Leandro
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
IV Congreso Nacional de Pulvimetalurgia - 2012
- ISBN 84-695-3723-7
This researcher has no working papers.
This researcher has no technical reports.
S2018/NMT-4411 - ADITIMAT-CM. Additive Manufacturing: from material to apllication.
- Gordo Oderiz, Elena
- Jimenez Morales, Antonia
- Rabanal Jimenez, Maria Eugenia
- Tsipas, Sophia Alexandra
- Alvaredo Olmos, Paula
- Prieto Muñoz, Estela Maria
- Nicolas Morillas, Maria De
- Cifuentes Cuellar, Sandra Carolina
- Alcantara Garcia, Andrea
- Chirico Rodriguez, Caterina Del Carmen
- Rodriguez Gonzalez, Paula
- Toirac Chavez, Beatriz Dunia
- Tabares Lorenzo, Eduardo
- Reverte Palomino, Eduardo
- Ferreiro Fernandez, Adalyz
- Romero Villarreal, Carlos
Period: 01-01-2019 - 30-04-2023
Type of funding: Regional
Funding entity: CAM. CONSEJERÍA DE EDUCACIÓN E INVESTIGACION
MAT2006-26562-E - Acción Complementaria MEC - Propuesta europea SNAPCAT
- Rabanal Jimenez, Maria Eugenia
- Jimenez Morales, Antonia
- Ruiz Amador, Diego
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
Period: 01-01-2007 - 01-01-2008
Funding entity: MINISTERIO DE EDUCACION, CULTURA Y DEPORTE
Addenda a la Cátedra Höganäs de I+D en Pulvimetalurgia - "Liquid Phase Sintering for Dimensional Stability".
- Torralba Castello, Jose Manuel
- Campos Gomez, Monica
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Ruiz Navas, Elisa Maria
- Tsipas, Sophia Alexandra
- Torres Miranda, Eloy Alexander
- Bernardo Quejido, Elena
Period: 01-01-2011 - 31-12-2013
Type of funding: International
Funding entity: HOGANAS AB
Aplicación de la Tecnología MIM (Metal Injection Moulding) a la fabricación de implantes de titanio
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
- Tsipas, Sophia Alexandra
Period: 01-04-2008 - 31-12-2008
Funding entity: MIM TECH ALFA, S.L.
MAT2009-07165-E - BIONANOFUN: BIOcomposite NANOstructured FUNctional graded materials with predistable properties for vertebrae grafts (AA CC Modalidad D)
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Contreras Andujar, Jose Manuel
- Tsipas, Sophia Alexandra
Period: 01-01-2010 - 31-12-2010
Type of funding: National
Funding entity: MINISTERIO DE EDUCACION Y CIENCIA SEC. DE ESTADO DE UNIVERSIDADES E INVEST.
UC3M-TM-05-050 - CP05-DESARROLLO DE MATERIALES AVANZADOS MEDIANTE TECNOLOGÍA DE POLVOS
- Ruiz Navas, Elisa Maria
- Jimenez Morales, Antonia
- Ruiz Amador, Diego
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Delgado Tienda, Maria Luisa
- Sanchez Majado, Sagrario
- Khalifa Mohamed, Amal
- Gomez Villalba, Luz Stella De Las Mercedes
- Garcia Esteban, Pablo
- Benito Gonzalez, Santiago
- Gomez Jimenez, Beatriz
- Contreras Andujar, Jose Manuel
- Carnal Andres-montalvo, Ana
Period: 01-01-2006 - 31-12-2006
Funding entity: COMUNIDAD DE MADRID-UC3M
CCG06-UC3M/MAT-0819 - CP06: NUEVOS MATERIALES ESTRUCTURALES Y FUNCIONALES BASADOS EN COMPUESTOS NANOSTRUCTURADOS Y/O REFORZADOS CON NANOPARTÍCULAS
- Ruiz Navas, Elisa Maria
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Torralba Castello, Jose Manuel
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Delgado Tienda, Maria Luisa
- Martin Hernandez, Maria Isabel
- Sanchez Majado, Sagrario
- Milosevic, Olivera
- Gomez Villalba, Luz Stella De Las Mercedes
- Cuesta Lopez, Fernando Jose
- Garcia Esteban, Pablo
- Gomez Jimenez, Beatriz
- Sicre Artalejo, Jose Antonio
- Contreras Andujar, Jose Manuel
- Bolzoni, Leandro
- Fuentes Pacheco, Maria De La Luz
Period: 01-01-2007 - 31-12-2007
Funding entity: COMUNIDAD DE MADRID-UC3M
Center for Advanced Vehicular Systems (Mississippi State University) and UC3M collaboration
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
- Tsipas, Sophia Alexandra
Period: 28-07-2008 - 28-08-2008
Funding entity: CENTER FOR ADVANCED VEHICULAR SYSTEMS. MISSISSIPPI UNIVERSITY
Collaboration for MIM development
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
- Tsipas, Sophia Alexandra
Period: 10-09-2008 - 09-11-2008
Funding entity: HOGANAS AB
Collaboration for MIM development Höganäs-UC3M
- Torralba Castello, Jose Manuel
- Jimenez Morales, Antonia
- Gordo Oderiz, Elena
- Rabanal Jimenez, Maria Eugenia
- Campos Gomez, Monica
- Ruiz Navas, Elisa Maria
- Martin Hernandez, Maria Isabel
- Tsipas, Sophia Alexandra
Period: 05-02-2009 - 04-03-2009
Funding entity: HOGANAS AB
Design and characterization of modified powder metallurgy titanium surfaces obtained by ß-Stabilizing elements diffusion treatments for biomedical applications.
- Jimenez Morales, Antonia
- Ureña Alcazar, Julia Maria
- Gordo Oderiz, Elena
Reading date: 23-03-2018
Diseño y Procesado por Vía Pulvimetalúrgica Convencional de Aleaciones de Ti de Bajo Coste
- Garcia Esteban, Pablo
- Ruiz Navas, Elisa Maria
- Gordo Oderiz, Elena
Reading date: 01-07-2009
Diseño y procesado de aleaciones base titanio mediante técnicas pulvimetalúrgicas avanzadas
- Bolzoni, Leandro
- Gordo Oderiz, Elena
- Ruiz Navas, Elisa Maria
Reading date: 03-11-2011
Reading institution: CAMPUS DE LEGANES
Mechanical integrity of ceramic-metal composite materials: Influence of microstructure and processing route
- Gordo Oderiz, Elena
- Nicolas Morillas, Maria De
- Llanes Pitarch, Luis
Reading date: 15-07-2021
Microstructure and mechanical response of nanostructured bainitic steels.
- Gordo Oderiz, Elena
- Morales Rivas, Lucía
- G. Caballero, Francisca
Reading date: 25-02-2016
Nano-architectures with hierarchical porosity manufactured by colloidal techniques for application in ceramic semiconductor-based supercapacitors
- Gordo Oderiz, Elena
- Yus Dominguez, Joaquin Luis
- Gonzalez Granados, Zoilo
- Ferrari Fernandez, Begoña
Reading date: 16-09-2019
Nuevos Materiales Tipo Cermet de Matriz Fe: Estudio de Composición, Microestructura y Propiedades
- Alvaredo Olmos, Paula
- Gordo Oderiz, Elena
Reading date: 29-11-2012
Procesamiento por polvos de Ti mediante asociación de técnicas coloidales y pulvimetalúrgicas
- Garcia Das Neves, Roberto
- Gordo Oderiz, Elena
Reading date: 11-09-2014
Processing and characterization of novel biodegradable and bioresorbable pla/mg composites for ostosynthesis.
- Cifuentes Cuellar, Sandra Carolina
- Gordo Oderiz, Elena
- González Carrasco, José Luis
Reading date: 26-06-2015
Reading institution: CAMPUS DE LEGANES
Processing and surface modification of beta-Titanium alloys produced by powder metallurgy for biomedical applications
- Chirico Rodriguez, Caterina Del Carmen
- Tsipas, Sophia Alexandra
- Gordo Oderiz, Elena
Reading date: 29-09-2021
Research groups
Researcher profiles
-
ORCID
-
Web of Science ResearcherID
-
Scopus Author ID
-
Dialnet id